1. Introduction
This manual provides instructions for the installation, operation, and maintenance of the Morris Products Flat Panel LED Small Flood Light, Model 71533. This energy-efficient LED floodlight features a low-profile design and is suitable for various indoor and outdoor applications.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
- Ensure the supply voltage is compatible with the fixture's requirements (120/208/240/277V).
- Do not handle live wires.
- Wear appropriate personal protective equipment (PPE) during installation.
- This fixture is designed for wet locations (IP65, NEMA 4X).
3. Package Contents
Verify that all components are present and undamaged upon opening the package. If any parts are missing or damaged, contact customer support.
- Flat Panel LED Small Flood Light (Model 71533)
- Bracket Mount
Figure 3.1: Product packaging showing the Morris Products Flat Panel LED Small Flood Light box.
4. Setup and Installation
This flood light is designed for surface mount installation using the included bracket. Ensure the mounting surface is structurally sound to support the fixture's weight.
4.1 Mounting the Fixture
- Identify a suitable mounting location.
- Position the bracket mount against the surface and mark the drilling points.
- Drill pilot holes as necessary.
- Secure the bracket mount to the surface using appropriate hardware (not included).
- Attach the flood light fixture to the bracket, ensuring it is securely fastened. The bracket allows for adjustment of the light's angle.
Figure 4.1: Front view of the flood light showing the LED panel and bracket mount.
4.2 Electrical Wiring
IMPORTANT: All electrical wiring should be performed by a licensed electrician. Ensure power is disconnected at the circuit breaker before proceeding.
- The fixture supports Quad Voltage (120/208/240/277V). Connect the appropriate wires from the power supply to the fixture's wires.
- Typically, the black wire is Line (L), the white wire is Neutral (N), and the green wire is Ground (G). Refer to local electrical codes for specific color conventions.
- Use UL-listed wire connectors to secure all connections.
- Ensure all connections are tight and properly insulated.
Figure 4.2: Back view of the flood light, illustrating the wiring entry point and product label.
5. Operating Instructions
Once properly installed and wired, the Morris Products Flat Panel LED Small Flood Light operates by receiving power from the connected electrical circuit.
- Power On/Off: The light is controlled by the external switch or remote control connected to its circuit.
- Light Output: The fixture provides 6,179 lumens of 5000K Cool White light.
- Photo Control (Optional): A photo control unit can be installed remotely to enable automatic dusk-to-dawn operation. This feature is not integrated into the fixture itself.
6. Maintenance
The Morris Products Flat Panel LED Small Flood Light is designed for minimal maintenance due to its durable construction and long-life LED components.
- Cleaning: Periodically clean the polycarbonate lens with a soft, damp cloth to ensure optimal light output. Avoid abrasive cleaners.
- Inspection: Annually inspect the fixture and wiring for any signs of damage or wear. Ensure all mounting hardware remains secure.
- Corrosion Resistance: The bronze die-cast aluminum housing is corrosion-resistant, suitable for outdoor environments.
- LED Life: The LED light source has an expected life of 50,000+ hours, reducing the need for frequent bulb replacement.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; faulty wiring; tripped circuit breaker; defective fixture. | Check power supply at the source. Verify all wiring connections. Reset circuit breaker. If problem persists, consult a qualified electrician or contact customer support. |
| Light flickers or dims. | Unstable power supply; loose wiring connection; incompatible dimmer (if applicable). | Ensure stable power. Check and tighten all wiring connections. This fixture is not designed for dimming unless specified by an external controller. |
| Reduced light output. | Dirty lens; extreme operating temperature. | Clean the lens. Ensure the fixture is operating within its specified temperature range (-40°F to 131°F). |
8. Specifications
| Model Number | 71533 |
| Brand | Morris Products |
| Wattage | 50 Watts |
| Luminous Flux | 6,179 Lumens |
| Color Temperature | 5000K (Cool White) |
| Voltage | 120/208/240/277V (Quad Voltage) |
| Housing Material | Die Cast Aluminum |
| Lens Material | Polycarbonate |
| Finish Color | Bronze |
| LED Life Expectancy | 50,000+ Hours |
| Operating Temperature | -40°F to 131°F (-40°C to 55°C) |
| IP Rating | IP65 (NEMA 4X) Dust & Water Tight |
| Certifications | cULus Listed for Wet Locations, DLC Listed |
| Dimensions | Approximately 2 x 6 x 6 inches |
| Item Weight | 2 Pounds |
9. Warranty and Support
The Morris Products Flat Panel LED Small Flood Light (Model 71533) comes with a 5-Year Warranty from the date of purchase, covering defects in materials and workmanship under normal use.
For warranty claims, technical support, or any inquiries, please contact Morris Products customer service. Keep your purchase receipt as proof of purchase.
Contact Information:
Please refer to the Morris Products official website or your purchase documentation for the most current contact details.
