Travelwey 1
Travelwey Digital Alarm Clock Instruction Manual
Model: 1 | Brand: Travelwey
1. Introduction
Thank you for choosing the Travelwey Digital Alarm Clock. This clock is designed for ultimate simplicity and ease of use, ensuring a hassle-free experience for everyone, including children, seniors, and the elderly. Its intuitive controls and clear display make it a perfect addition to any bedside table.
Key Features:
- Extremely Simple Operation: Designed with minimal buttons for straightforward use.
- Integrated Night Light: A large, convenient light activated by a top button.
- Loud Alarm with Snooze: Adjustable alarm volume (Low/High) and a 9-minute snooze.
- Jumbo Red LED Display: Clear, extra-bright digits with a full-range dimmable slider.
- AC Powered with Battery Backup: Maintains time and alarm settings during power outages.

2. Setup
2.1 Powering the Clock
To power your Travelwey Digital Alarm Clock, simply plug the included power cord into a standard AC electrical outlet. The display will illuminate, and the clock will be ready for use.
2.2 Battery Backup (Optional)
For uninterrupted timekeeping and alarm functionality during a power outage, insert two AAA batteries (not included) into the battery compartment located on the back of the clock. During battery backup, the screen will go blank to conserve power, but time and alarm settings will be retained, and the alarm will still sound at the set time.

3. Operating Instructions
3.1 Setting the Time
- Locate the TIME SET button on the back of the clock.
- Press and hold the TIME SET button.
- While holding TIME SET, press the HOUR button (left button on top) repeatedly to adjust the hour.
- While holding TIME SET, press the MINUTE button (right button on top) repeatedly to adjust the minutes.
- Release the TIME SET button once the desired time is set.
3.2 Setting the Alarm
- Locate the ALARM SET button on the back of the clock.
- Press and hold the ALARM SET button.
- While holding ALARM SET, press the HOUR button (left button on top) repeatedly to adjust the alarm hour.
- While holding ALARM SET, press the MINUTE button (right button on top) repeatedly to adjust the alarm minutes.
- Release the ALARM SET button once the desired alarm time is set.
3.3 Activating/Deactivating the Alarm
To turn the alarm ON or OFF, use the red ALARM ON/OFF button located on the back of the clock. When the alarm is active, a small bell icon will appear on the display.
3.4 Snooze Function
When the alarm sounds, press the large SNOOZE/LIGHT bar on top of the clock to activate the 9-minute snooze function. The alarm will temporarily stop and resume after 9 minutes. You can repeatedly press the snooze bar until the alarm is manually switched off using the ALARM ON/OFF button.
3.5 Night Light Operation
The integrated night light can be activated by pressing the large SNOOZE/LIGHT bar on top of the clock. Press it again to turn the night light off. This feature provides convenient illumination in the dark.

3.6 Display Dimmer
Adjust the brightness of the red LED display using the DISPLAY DIMMER slider on the back of the clock. Slide it from 'LO' (Low) to 'HI' (High) to find your preferred brightness level. You can even dim it completely off for total darkness.
3.7 Alarm Volume
Adjust the alarm volume using the ALARM VOLUME slider on the back of the clock. Slide it from 'LO' (Low) to 'HI' (High) to set the desired alarm loudness.
3.8 12/24 Hour Format
To switch between 12-hour and 24-hour time formats, simply press the TIME SET button once (do not hold). The display will toggle between the two formats.
3.9 Product Overview Video
For a visual guide on the clock's features and operation, please watch the official product video below:
4. Maintenance
- Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the clock away from direct sunlight, extreme temperatures, and moisture.
- Ensure proper ventilation around the clock.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Power outage; Dimmer slider set to 'OFF' or very low. | Check power connection. Adjust the DISPLAY DIMMER slider to a brighter setting. Ensure AAA batteries are installed for backup. |
| Alarm does not sound. | Alarm is not activated; Alarm volume is too low. | Press the ALARM ON/OFF button to activate the alarm (bell icon should appear). Adjust the ALARM VOLUME slider to a higher setting. |
| Time is incorrect. | Time not set correctly; Power interruption without battery backup. | Re-set the time using the TIME SET, HOUR, and MINUTE buttons. Ensure AAA batteries are installed for backup. |
6. Specifications
- Brand: Travelwey
- Model: 1
- Color: Black
- Display Type: Digital LED (Red)
- Power Source: Corded Electric
- Battery Backup: 2 x AAA batteries (not included)
- Product Dimensions: 6.5"W x 2.75"H
- Item Weight: 12.3 ounces
- Material: Acrylonitrile Butadiene Styrene
- Special Features: Snooze, Alarm, Night Light, Full Range Brightness Dimmer
7. Warranty and Support
This Travelwey Digital Alarm Clock comes with a Limited Warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or contact Travelwey customer service directly. Contact information can typically be found on the manufacturer's official website or on the product packaging.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.