Aduro SBN45

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Aduro Amplify Pro SBN45 Wireless Stereo Around The Neck Earbud Headset

User Manual

Introduction

Thank you for choosing the Aduro Amplify Pro SBN45 Wireless Stereo Around The Neck Earbud Headset. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use.

The Aduro Amplify Pro SBN45 is designed for comfortable wear and high-quality audio, featuring an around-the-neck design, enhanced audio and bass response, vibrating call alerts, and audible pairing and battery status alerts.

Aduro Amplify Pro SBN45 Headset, front view

Figure 1: Front view of the Aduro Amplify Pro SBN45 Wireless Stereo Headset, showcasing its ergonomic neckband design and integrated earbuds.

Setup

1. Charging the Headset

Before first use, fully charge the headset. Connect the provided USB charging cable to the charging port on the headset and to a USB power source. The LED indicator will show the charging status. Once fully charged, the LED indicator will change or turn off, depending on the model.

2. Pairing with a Bluetooth Device

  1. Ensure the headset is turned off.
  2. Press and hold the Power button until the LED indicator flashes rapidly, indicating pairing mode.
  3. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
  4. Select "Aduro SBN45" from the list of found devices.
  5. Once paired, the LED indicator on the headset will flash slowly or turn solid blue, and you may hear an audible confirmation.

If pairing is unsuccessful, turn off the headset and your device's Bluetooth, then repeat the steps.

Operating Instructions

Diagram of Aduro Amplify Pro SBN45 controls

Figure 2: Detailed diagram of the Aduro Amplify Pro SBN45 headset controls, showing the location and function of the Play/Pause, Answer/End Calls, Volume Rocker, and Next/Previous Track buttons.

Power On/Off

  • Power On: Press and hold the Power button until the LED indicator lights up and you hear an audible prompt.
  • Power Off: Press and hold the Power button until the LED indicator turns off and you hear an audible prompt.

Music Playback

  • Play/Pause: Press the Play/Pause button once.
  • Next Track: Press and hold the Volume Up button (or dedicated Next Track button if available).
  • Previous Track: Press and hold the Volume Down button (or dedicated Previous Track button if available).
  • Volume Up: Press the Volume Up button.
  • Volume Down: Press the Volume Down button.

Call Management

  • Answer/End Call: Press the Answer/End Call button once.
  • Reject Call: Press and hold the Answer/End Call button for approximately 2 seconds.
  • Redial Last Number: Double-press the Answer/End Call button.
  • Vibrating Call Alerts: The headset will vibrate to notify you of incoming calls.

Maintenance

Cleaning

Wipe the headset with a soft, dry cloth. Do not use abrasive cleaners or solvents. Avoid exposing the headset to excessive moisture.

Storage

Store the headset in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the headset.

Troubleshooting

ProblemSolution
Headset does not power on.Ensure the headset is fully charged. Connect to a power source and allow it to charge for at least 30 minutes before attempting to power on again.
Cannot pair with device.Make sure the headset is in pairing mode (rapidly flashing LED). Ensure Bluetooth is enabled on your device and it is within 10 meters of the headset. Try turning off and on both the headset and your device's Bluetooth.
No sound or low volume.Check the volume levels on both the headset and your connected device. Ensure the headset is properly paired and connected. Try re-pairing the headset.
Call quality is poor.Ensure you are within Bluetooth range of your device. Check for interference from other wireless devices. Ensure the microphone is not obstructed.

Specifications

  • Model Number: AY-SBN45-03
  • Connectivity: Wireless (Bluetooth)
  • Form Factor: Behind The Neck
  • Battery Life (Average): Up to 10 hours (Talk & Music time)
  • Bluetooth Range: Up to 10 meters (33 feet)
  • Control Type: Media Control, Remote
  • Earpiece Shape: Over Ear
  • GTIN: 849813008946

Warranty and Support

The Aduro Amplify Pro SBN45 comes with an Aduro Limited Lifetime Warranty. For warranty claims or technical support, please contact Aduro customer service. Refer to the product packaging or the official Aduro website for contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.