1. Introduction and Overview
This manual provides essential information for the proper use, maintenance, and care of your Sirman 40751DF05 DF 5 Half Moon Slicer Plate. This high-quality accessory is specifically designed for use with the Sirman TM A continuous feed food processor.
The slicer plate is engineered for precision slicing, particularly effective for ripe vegetables and tomatoes, producing a consistent 5 mm (3/16") thickness. Its robust construction ensures durability and ease of cleaning, making it suitable for commercial use.
An image of the Sirman 40751DF05 DF 5 Half Moon Slicer Plate, showing its circular stainless steel design with a half-moon shaped blade for slicing. The plate is silver-colored and appears durable.
2. Product Features
- Compatibility: Designed for use with Sirman TM A continuous feed food processors.
- Material: Constructed from durable stainless steel.
- Slice Thickness: Produces a consistent 5 mm (3/16") slice.
- Design: Half-moon blade shape for specific slicing needs.
- Durability: Built for heavy commercial use.
- Maintenance: Easy to clean; resistant to staining and cracking.
- Origin: Made in Italy.
3. Setup
The Sirman 40751DF05 DF 5 Half Moon Slicer Plate is an accessory designed for specific Sirman food processors. Follow these general steps for installation:
- Safety First: Ensure the food processor is unplugged and turned off before attempting any installation or removal of parts.
- Consult Processor Manual: Refer to your Sirman TM A continuous feed food processor's instruction manual for specific guidance on installing slicing plates.
- Insert Plate: Carefully align the slicer plate with the drive shaft and seating area within the food processor's bowl or chamber.
- Secure: Ensure the plate is securely seated and locked into place according to your food processor's design. A loose plate can cause damage or injury.
- Pre-Operation Check: Before plugging in and operating, manually check that the plate rotates freely and is properly aligned.
4. Operating Instructions
Once the Sirman 40751DF05 DF 5 Half Moon Slicer Plate is correctly installed in your Sirman TM A food processor, you can begin operation:
- Prepare Ingredients: Wash and prepare the vegetables or fruits you intend to slice. This plate is optimized for ripe vegetables and tomatoes.
- Load Food Processor: Place the prepared ingredients into the food processor's feed chute. Do not overfill.
- Power On: Plug in the food processor and turn it on.
- Feed Ingredients: Use the food pusher to guide the ingredients through the feed chute and onto the rotating slicer plate. Apply steady, even pressure.
- Collect Slices: The sliced product will be discharged into the collection bowl or container of your food processor.
- Turn Off: Once slicing is complete, turn off and unplug the food processor before removing the bowl or accessing the plate.
Note: Always follow the safety guidelines provided in your Sirman TM A food processor's main instruction manual.
5. Maintenance and Care
Proper maintenance ensures the longevity and optimal performance of your Sirman 40751DF05 DF 5 Half Moon Slicer Plate. This plate is designed for easy cleaning and resistance to staining and cracking.
- Cleaning: The manufacturer recommends Hand Wash Only for this product.
- Immediate Cleaning: Clean the slicer plate immediately after each use to prevent food residue from drying and hardening.
- Washing: Use warm, soapy water and a soft brush or sponge to clean the plate. Pay attention to the blade area, exercising caution due to its sharpness.
- Rinsing: Rinse thoroughly with clean water to remove all soap residue.
- Drying: Dry the plate completely with a clean cloth or allow it to air dry before storage. This prevents water spots and potential corrosion.
- Storage: Store the slicer plate in a dry, safe place where it will not be damaged or cause accidental injury.
6. Troubleshooting
The Sirman 40751DF05 DF 5 Half Moon Slicer Plate is a passive component designed for reliability. Most operational issues will stem from the food processor itself or improper installation.
- Poor Slice Quality:
- Ensure the plate is correctly seated and secured in the food processor.
- Verify that the food processor is operating at the correct speed.
- Check the freshness and firmness of the ingredients; very soft or overripe produce may not slice cleanly.
- Plate Not Rotating:
- Confirm the plate is properly engaged with the food processor's drive shaft.
- Ensure the food processor itself is powered on and functioning correctly.
- Unusual Noise During Operation:
- Immediately turn off and unplug the food processor.
- Inspect the slicer plate for any damage or misalignment.
- Check for any foreign objects in the food processor's chamber.
If issues persist, consult the troubleshooting section of your Sirman TM A food processor's manual or contact Sirman customer support.
7. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 40751DF05 |
| Brand | Sirman |
| Material | Stainless Steel |
| Color | Silver |
| Blade Material | Stainless Steel |
| Blade Shape | Round (Half Moon) |
| Operation Mode | Manual (as an accessory to a powered machine) |
| Product Care Instructions | Hand Wash Only |
| Special Feature | Lightweight |
| Package Dimensions | 8.98 x 8.78 x 1.65 inches |
| Item Weight | 1.43 Pounds |
| Date First Available | February 23, 2016 |
| Manufacturer | Sirman |
8. Warranty and Support
For information regarding the warranty of your Sirman 40751DF05 DF 5 Half Moon Slicer Plate, please refer to the documentation provided with your original purchase or contact Sirman directly. Warranty terms and conditions may vary.
For technical support or further assistance, please reach out to Sirman customer service or the authorized dealer from whom you purchased the product. Contact information can typically be found on the manufacturer's official website or in your product packaging.
