Dish FBA_4330245229
DISH NETWORK Remote 52.0 User Manual
Model: FBA_4330245229
Introduction
The DISH Network Remote 52.0 is designed to enhance your television viewing experience with advanced features and intuitive controls. This remote is compatible with all Hopper, Joey, and Wally Receivers. It offers both Infrared (IR) and Radio Frequency (RF) compatibility, with RF functionality available when paired with Hopper and Wally receivers.
Key features include:
- Remote Finder Function: Easily locate your remote by pressing a button on your receiver.
- Backlit Keys: Keypad illuminates automatically in dark settings for improved visibility.
- Personalization: Program hot keys for quick access to popular streaming services like Netflix, recording shows, or enabling closed captioning.
- Broad Compatibility: Works seamlessly with all Hopper, Joey, and Wally Receivers.
Setup
1. Battery Installation
The DISH Network Remote 52.0 requires two (2) AA batteries for operation. Ensure correct polarity when inserting the batteries.
Figure 1: Back of the remote control, illustrating the location of the battery compartment.
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the compartment.
- Insert two AA batteries, matching the positive (+) and negative (-) terminals as indicated inside the compartment.
- Slide the cover back into place until it clicks securely.
2. Pairing with Your Receiver
The remote can operate in Infrared (IR) mode or Radio Frequency (RF) mode. For RF operation with Hopper and Wally receivers, pairing is required. For IR operation, direct line-of-sight to the receiver is necessary.
To pair your remote with a Hopper or Wally receiver for RF control:
- Ensure your receiver is powered on.
- Point the remote at the receiver.
- Press the SYSTEM INFO button on the front panel of your Hopper or Wally receiver.
- On the remote, press and hold the PAIR button (usually located inside the battery compartment or on the side) until the remote's lights flash.
- Follow any on-screen prompts to complete the pairing process.
If your remote is not pairing, ensure there are no obstructions and that the batteries are fresh.
Operating Instructions
The DISH Network Remote 52.0 features a comprehensive layout for easy navigation and control of your entertainment system.
Figure 2: Front view of the remote control with all primary buttons.
Button Functions Overview
| Button | Function |
|---|---|
| POWER (TV/Receiver) | Turns the TV or receiver on/off. |
| APPS | Accesses applications menu. |
| DVR | Opens the Digital Video Recorder menu. |
| GUIDE | Displays the program guide. |
| BACK | Returns to the previous screen or menu. |
| OPTIONS | Accesses contextual options for the current screen. |
| INFO | Displays information about the current program. |
| SEARCH | Initiates a content search. |
| Navigation Pad (Up/Down/Left/Right/SELECT) | Navigates menus and selects items. |
| REWIND/PLAY/PAUSE/FAST FORWARD | Controls media playback. |
| VOL +/- | Adjusts volume up or down. |
| MUTE | Mutes or unmutes audio. |
| CH +/- | Changes channels up or down. |
| Number Pad (0-9) | Direct channel entry and text input. |
| SAT/TV/AUX/INPUT Buttons | Selects the device to control (Satellite, TV, Auxiliary, Input Source). |
Figure 3: Side view of the remote control, showing the device selection buttons.
Using Hot Keys for Personalization
The remote allows for personalization through programmable hot keys. Refer to your receiver's on-screen menu for specific instructions on how to assign functions like Netflix launch, recording shortcuts, or closed captioning toggles to these keys.
Maintenance
Battery Replacement
When the remote's performance degrades or the backlit keys dim, it's time to replace the batteries. Follow the battery installation steps outlined in the Setup section. Always use fresh AA alkaline batteries for optimal performance.
Cleaning
To clean your remote, gently wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the remote. Avoid using harsh chemicals or abrasive cleaners.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Remote not responding. |
|
| Backlit keys are dim or not working. |
|
| Remote only controls some functions. |
|
| Remote Finder function not working. |
|
Specifications
- Model Number: FBA_4330245229
- Dimensions: 8.5 x 1 x 4 inches
- Weight: 3.2 ounces
- Power Source: 2 AA batteries (required)
- Connectivity: Infrared (IR), Radio Frequency (RF compatible with Hopper and Wally Receivers)
- Compatible Devices: All Hopper, Joey, and Wally Receivers
- Special Features: Ergonomic design, Backlit Keys, Remote Finder function, Programmable Hot Keys
- Color: Black
- Manufacturer: DISH Network
Warranty and Support
Specific warranty information for this product may vary depending on the retailer and purchase date. Please refer to your purchase documentation or contact your point of sale for warranty details.
For technical support or further assistance, please visit the official DISH Network support website or contact their customer service line. Keep your product model number (FBA_4330245229) and any purchase receipts handy when seeking support.
DISH Network Support: www.dish.com/support
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.