Introduction
Thank you for choosing the Adesso Bedford Floor Lamp. This manual provides essential information for the safe assembly, operation, and maintenance of your new lamp. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
The Adesso Bedford Floor Lamp, designed to illuminate your space with a warm glow.
Safety Information
- Ensure the power is disconnected before assembly, bulb replacement, or cleaning.
- Use only the specified bulb type and wattage (E26 medium base, up to 150W incandescent or LED equivalent).
- Do not operate the lamp with a damaged cord or plug.
- This product is intended for indoor use only.
- Keep the lamp away from water and moisture.
- Always handle the lamp with care to prevent damage.
The Bedford Floor Lamp is UL and ETL certified, meeting U.S. government-regulated safety standards.
Package Contents
Verify that all components are present before beginning assembly:
- Lamp Base/Legs (Walnut Wood)
- Oatmeal Linen Drum Shade
- Round Walnut Wood Shelf
- Lamp Socket Assembly
- Hardware Pack (screws, washers)
- Power Cord (attached to lamp)
Assembly Instructions
Follow these steps to assemble your Adesso Bedford Floor Lamp:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Ensure all packing materials are removed.
- Assemble Lamp Legs: Connect the wooden lamp legs according to the diagram. Secure them using the provided hardware. Ensure all connections are tight and stable.
- Attach Shelf: Position the round walnut wood shelf onto the designated area on the lamp legs. Secure it firmly with the appropriate screws and washers from the hardware pack.
- Install Lamp Socket Assembly: Attach the lamp socket assembly to the top of the lamp structure. Ensure it is securely fastened.
- Place Lampshade: Carefully place the oatmeal linen drum shade onto the lamp socket assembly. Secure it with the shade ring provided (if applicable).
- Install Bulb: Insert one E26 medium base bulb (not included), up to 150W incandescent or LED equivalent, into the lamp socket. Do not exceed the maximum wattage.
Detail of the lamp's wood body, shelf, and linen shade for assembly reference.
Operating Instructions
The Adesso Bedford Floor Lamp features a 3-way rotary switch for adjustable brightness:
- First Turn: Provides low light output.
- Second Turn: Provides medium light output.
- Third Turn: Provides high light output.
- Fourth Turn: Turns the lamp off.
Plug the 105-inch (8.75 ft) fabric-covered cord into a standard wall outlet. The lamp is also smart outlet compatible for integration with smart home systems.
Key features of the Bedford Floor Lamp, including the 3-way rotary switch.
Maintenance
- Cleaning: Disconnect power before cleaning. Wipe the wood and metal surfaces with a soft, dry cloth. For the linen shade, use a lint roller or a soft brush to remove dust. Do not use abrasive cleaners or polishes.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and screw in a new E26 medium base bulb, up to 150W incandescent or LED equivalent.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. | Power cord not plugged in; bulb loose or faulty; no power at outlet. | Ensure cord is fully plugged in. Tighten or replace bulb. Check outlet with another device. |
| Lamp flickers. | Loose bulb; incorrect bulb type; unstable power supply. | Tighten bulb. Ensure bulb is compatible with 3-way switch. Check power source. |
| Assembly issues (e.g., wobbly). | Hardware not tightened sufficiently; missing components. | Re-check all connections and tighten hardware. Verify all parts from the package contents list are present. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 3471-15 |
| Product Dimensions | 20"D x 20"W x 59.5"H |
| Item Weight | 13.64 pounds |
| Base Material | Wood (Walnut Finish) |
| Shade Material | Cotton (Oatmeal Linen) |
| Bulb Base | E26 Medium Base |
| Max Wattage | 150 Watts (Incandescent or LED equivalent) |
| Switch Type | 3-Way Rotary Socket Switch |
| Power Source | Corded Electric |
| Cord Length | 105 inches (8.75 ft) |
| Certification | UL Certified |
Approximate dimensions of the Adesso Bedford Floor Lamp.
Warranty
This Adesso Bedford Floor Lamp is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Support
For further assistance, missing parts, or warranty inquiries, please contact Adesso customer support. Refer to the product packaging or the official Adesso website for current contact information.
Adesso Brand Overview
An official video from Adesso showcasing their range of luxury lighting products.
