Sunday Inc UC7080T

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Sunday Inc CHQ7080T UC7080T Ceiling Fan Remote Control Instruction Manual

Model: UC7080T | Brand: Sunday Inc

1. Introduction

This instruction manual provides detailed guidance for the proper setup, operation, and maintenance of your Sunday Inc CHQ7080T UC7080T Ceiling Fan Remote Control. This remote is designed to control compatible ceiling fans, offering convenient access to fan speed, light functions, and direction reversal.

Note: This product is the remote control only. The ceiling fan receiver is not included and must be present in your fan for this remote to function.

2. Package Contents

  • 1 x Sunday Inc CHQ7080T UC7080T Remote Control

Note: A 9V battery is required for operation and is not included with the remote control.

3. Setup and Pairing

3.1 Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery cover open.
  3. Insert one (1) 9V battery, ensuring correct polarity (+/-).
  4. Close the battery cover securely.
Sunday Inc CHQ7080T UC7080T Ceiling Fan Remote Control

Figure 1: The Sunday Inc CHQ7080T UC7080T remote control. The image displays the front of the white remote with gray buttons for fan speed (HI, MED, LOW, OFF), fan direction (REV), and a green button for light control. A small red LED indicator is visible at the top.

3.2 Pairing with Your Ceiling Fan

This remote control operates using dip switches to match the frequency of your ceiling fan's receiver. The dip switch settings must match between the remote and the receiver for proper function.

  1. Access Receiver: Turn off power to the ceiling fan at the circuit breaker. Access the receiver unit located within the fan's canopy or housing.
  2. Identify Dip Switches: Both the remote control (inside the battery compartment) and the fan receiver will have a series of small switches (dip switches).
  3. Match Settings: Carefully set the dip switches on your new remote control to exactly match the pattern of the dip switches on your fan's receiver. Use a small tool (like a pen tip) if necessary.
  4. Reassemble and Test: Securely close the battery compartment on the remote and reassemble the fan canopy. Restore power to the ceiling fan at the circuit breaker.
  5. Function Test: Test all functions of the remote control (fan speeds, light, reverse) to ensure successful pairing. If the remote does not work, re-verify the dip switch settings.

4. Operating Instructions

The remote control features clearly labeled buttons for easy operation of your ceiling fan and light kit.

  • HI: Activates the fan at high speed.
  • MED: Activates the fan at medium speed.
  • LOW: Activates the fan at low speed.
  • OFF: Turns the fan off.
  • REV: Reverses the direction of the fan blades. This function is typically used to change between downdraft (cooling) and updraft (circulating warm air) modes.
  • Light Button (Green):
    • Press once to turn the light ON.
    • Press and hold to dim the light (if your fan's light kit supports dimming).
    • Press again to turn the light OFF.

5. Maintenance

  • Battery Replacement: Replace the 9V battery when the remote's performance diminishes or the indicator light does not illuminate. Always use a fresh, high-quality 9V battery.
  • Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or allow moisture to enter the remote.
  • Storage: Store the remote in a dry place away from extreme temperatures and direct sunlight.

6. Troubleshooting

  • Remote not responding:
    • Check if the 9V battery is installed correctly and has sufficient charge. Replace if necessary.
    • Verify that the dip switch settings on the remote match those on the fan's receiver. Refer to Section 3.2.
    • Ensure there are no obstructions between the remote and the fan receiver.
    • Confirm power is supplied to the ceiling fan at the circuit breaker.
  • Fan or light functions intermittently:
    • This could indicate a weak battery. Replace the 9V battery.
    • Check for potential interference from other remote-controlled devices in the vicinity.
  • Light dimming feature not working:
    • Ensure your ceiling fan's light kit is compatible with dimming functionality. Not all light kits support dimming.

7. Specifications

FeatureDetail
BrandSunday Inc
Model NumberUC7080T (also compatible with CHQ7080T)
Compatible DevicesCeiling Fan
Power SourceBattery Powered (1 x 9V battery, not included)
FunctionsFan Speed (High, Medium, Low, Off), Light Control (On/Off, Dimming), Fan Reverse
ColorWhite
Item Weight3.2 ounces
Package Dimensions6.5 x 6 x 1.75 inches

8. Warranty and Support

For warranty information or technical support, please refer to the contact details provided by your retailer or the manufacturer, Sunday Inc. Keep your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.