Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ECCO EW2461 Camouflage Work Light. Please read this manual thoroughly before using the product and retain it for future reference.
Safety Information
- Eye Safety: Do not stare directly into the LED light. The intense light output can cause temporary vision impairment or eye damage.
- Charging: Use only the provided A/C and D/C chargers or a compatible mini USB cable for charging. Using unauthorized chargers may damage the battery or the device.
- Water Exposure: This work light is not designed for submersion. Avoid exposing the device to heavy rain or water to prevent electrical shock or damage.
- Temperature: Do not operate or charge the light in extreme temperatures. Refer to specifications for recommended operating temperatures.
- Disassembly: Do not attempt to disassemble, modify, or repair the work light. This may void the warranty and pose safety risks. Contact qualified service personnel for repairs.
- Magnetic Base: The magnetic base is strong. Keep it away from sensitive electronic devices, credit cards, and pacemakers to prevent interference or damage.
Package Contents
Verify that all items are present in the package:
- ECCO EW2461 Camouflage Work Light
- Mini USB Charging Cable
- A/C Wall Charger
- D/C Car Charger
Product Overview
The ECCO EW2461 is a versatile, rechargeable LED work light featuring a durable camouflage housing, a powerful flood beam, and a magnetic base for hands-free operation.
Image showing the ECCO EW2461 Camouflage Work Light with its square LED head, adjustable handle, and camouflage magnetic base.
Key Components:
- LED Array: Five high-intensity LEDs for flood illumination.
- Adjustable Handle: Allows for easy carrying and positioning of the light.
- Power Button: Controls power and light modes.
- Charging Port: Located on the base, for connecting the mini USB charging cable.
- Magnetic Base: Provides secure attachment to metallic surfaces for hands-free use.
Setup
Initial Charging:
- Before first use, fully charge the work light.
- Connect the mini USB charging cable to the charging port on the light's base.
- Connect the other end of the USB cable to either the A/C wall charger (for household outlets) or the D/C car charger (for vehicle power outlets).
- The charging indicator light (if present) will illuminate during charging and change color or turn off when fully charged.
- A full charge typically takes several hours. Do not overcharge the battery.
Operating Instructions
Turning On/Off and Mode Selection:
- Power On: Press the power button located on the base of the light. The light will turn on in its primary flood mode.
- Cycle Modes: Press the power button repeatedly to cycle through available light modes. This model features standard flood illumination, 100% flashing, and 30% SOS flashing patterns.
- Power Off: Continue pressing the power button until the light turns off, or press and hold the power button for approximately 2-3 seconds to turn off directly from any mode.
Using the Magnetic Base:
The integrated magnetic base allows for convenient, hands-free operation. Simply attach the base to any suitable metallic surface. Ensure the surface is clean and flat for optimal adhesion.
Adjusting the Light:
The adjustable handle allows you to pivot the light head to direct the beam precisely where needed. Loosen the side knobs, adjust the angle, and then tighten the knobs to secure the position.
Maintenance
Cleaning:
Wipe the exterior of the work light with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or internal components. Ensure the charging port is free of dust and debris.
Battery Care:
- To prolong battery life, avoid completely draining the battery before recharging.
- If storing the light for an extended period, charge it to approximately 50% every 3-6 months.
- Do not expose the battery to extreme heat or cold.
Storage:
Store the work light in a cool, dry place away from direct sunlight and moisture when not in use.
Troubleshooting
- Light not turning on: Ensure the battery is charged. Connect to a charger and try again.
- Light not charging: Check that the charging cable and adapter are securely connected. Verify the power source (outlet/vehicle) is functional. Inspect the charging port for damage or debris.
- Dim light output: The battery may be low. Recharge the unit.
- Magnetic base not holding: Ensure the metallic surface is clean, flat, and free of rust or paint that could reduce magnetic adhesion.
If these steps do not resolve the issue, contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Model Number | EW246l-CAM0 |
| Brand | ECCO (Manufacturer) / Servicemate (Brand Name) |
| Light Source Type | LED (5 LEDs) |
| Light Output Maximum | 600 lumens |
| Voltage | 12 volts (12/24vdc compatible for charging) |
| Power Source | Rechargeable Battery (Hand-powered operation) |
| Finish Type | Magnetic |
| Color | Camouflage Housing, White Light |
| Shade Material | Metal |
| Item Weight | 0.27 g |
| Special Features | Flashing patterns (100% flashing, 30% SOS flashing), Magnetic Base |
Warranty Information
Specific warranty details for the ECCO EW2461 Camouflage Work Light are not provided in this manual. Please refer to the product packaging or contact the manufacturer directly for current warranty terms and conditions.
Support
For technical assistance, replacement parts, or further inquiries regarding your ECCO EW2461 Camouflage Work Light, please contact the manufacturer or your authorized dealer. Keep your model number (EW246l-CAM0) and purchase date available when contacting support.
