Evenflo Legacy LX Stroller and Car Seat Travel System

1. Introduction

The Evenflo Legacy LX Travel System offers a versatile, practical, and comfortable solution for your baby's transportation needs. This system includes a stroller and a car seat, designed to adapt as your child grows from newborn up to approximately 4 years old. The stroller features a modular design that converts into a bassinet, a 5-point harness for security, and a lightweight aluminum frame for durability and ease of transport.

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Evenflo Legacy LX Travel System. Please read all instructions carefully before use and keep this manual for future reference.

Important Safety Information

• Always secure your child with the 5-point harness when using the stroller or car seat.
• Never leave your child unattended in the stroller or car seat.
• Ensure the stroller is fully open and locked before placing a child in it.
• Engage the brakes when the stroller is stationary.
• Do not overload the storage basket or hang bags on the handle, as this can cause instability.
• The car seat is designed for infants from 1.8 kg to 13 kg. The stroller is suitable for children from 2.2 kg to 18 kg.
• Always refer to the separate car seat manual for detailed vehicle installation instructions.

2. Package Contents

Verify that all components are present before beginning assembly:

• Stroller Frame with Wheels
• Stroller Seat Unit (convertible to bassinet)
• Infant Car Seat
• Canopy
• Foot Cover (Cubrepiés)
• Mosquito Net (Mosquitero)
• Removable Safety Bar

3. Setup and Assembly

3.1 Stroller Frame Assembly

1. Unfold the stroller frame until it locks into place. Ensure all locking mechanisms are engaged.
2. Attach the front wheels by pushing them into the designated slots until they click.
3. Attach the rear wheels by sliding them onto the axle and securing them with the provided pins or clips.

Image: The Evenflo Legacy LX stroller frame with wheels attached, ready for seat installation.

3.2 Attaching the Stroller Seat Unit

1. Align the connectors on the stroller seat unit with the attachment points on the stroller frame.
2. Push down firmly until the seat unit clicks securely into place. Verify that it is properly locked by gently pulling upwards.
3. The seat unit can be installed facing forward or rearward.

Image: The Evenflo Legacy LX stroller with the seat unit configured as a bassinet, facing rearward.

3.3 Attaching the Infant Car Seat

1. Ensure the stroller seat unit is removed from the frame if you are attaching the car seat directly.
2. Align the car seat with the attachment points on the stroller frame.
3. Lower the car seat onto the frame until it clicks securely into place. Always check that the car seat is firmly attached before use.

Image: The Evenflo Legacy LX stroller with the infant car seat securely attached to the frame.

3.4 Car Seat Vehicle Installation

The infant car seat can be installed in your vehicle using the vehicle's seat belt. Refer to the separate car seat instruction manual for detailed installation steps and safety guidelines specific to your car seat model. Always ensure the car seat is installed correctly and securely before placing your child in it.

4. Operating Instructions

4.1 Adjusting the Handle

The stroller features a reversible and telescopic handle. To adjust the handle height, locate the adjustment buttons on either side of the handle. Press these buttons and extend or retract the handle to your desired height. Release the buttons to lock the handle in place. To reverse the handle direction, press the release buttons and swing the handle over to the opposite side of the stroller.

4.2 Reclining the Seat

The stroller seat offers 4 recline positions. Locate the recline lever or button on the back of the seat. Press or lift the lever and adjust the seat to the desired angle. Ensure the seat locks into one of the four positions before use.

4.3 Using the 5-Point Harness

To secure your child, place them in the seat and bring the shoulder straps over their shoulders, the waist straps around their hips, and the crotch strap between their legs. Insert the buckles of the shoulder and waist straps into the central buckle until they click. Adjust the straps to ensure a snug fit, leaving enough room for one finger between the strap and your child's body. To release, press the button on the central buckle.

4.4 Folding the Stroller

The Legacy LX stroller features a compact, two-hand fold system. Ensure the seat is in an upright position and the canopy is retracted. Locate the folding mechanisms, typically on the handle or sides of the frame. Follow the specific instructions for your model to engage the folding latches and collapse the stroller. Ensure the stroller is fully folded and locked for transport or storage.

Image: The Evenflo Legacy LX stroller in its compact folded position, demonstrating ease of storage.

4.5 Using the Hand Brake

The stroller is equipped with a convenient hand brake. To engage the brake, push the lever down. To release, lift the lever up. Always ensure the brake is fully engaged when the stroller is stationary to prevent accidental movement.

4.6 Converting to Bassinet Mode

To convert the seat unit into a bassinet, adjust the recline to the fully flat position. Depending on the model, you may need to release side straps or buckles to flatten the seat base and raise the footrest to form an enclosed bassinet. Ensure all conversion mechanisms are securely fastened.

4.7 Canopy and Observation Window

The extensible canopy provides protection from the elements. It features a rear zipper to access an observation window, allowing you to check on your child without disturbing them. Extend or retract the canopy as needed.

5. Maintenance

• Cleaning: Clean the fabric parts with a damp cloth and mild soap. Do not use harsh detergents or bleach. Allow to air dry completely. The frame can be wiped clean with a damp cloth.
• Wheels: Regularly check the wheels for debris and ensure they rotate freely. Lubricate axles if necessary with a silicone-based lubricant.
• Storage: Store the travel system in a dry, cool place away from direct sunlight to prevent fading and material degradation.
• Inspections: Periodically check all fasteners, rivets, and plastic parts for security and damage. Replace worn or damaged parts immediately.

6. Troubleshooting

• Stroller does not fold easily: Ensure the seat is in the upright position and the canopy is retracted. Check for any obstructions in the folding mechanism.
• Wheels are stiff or squeaky: Clean any dirt or debris from the wheel axles. Apply a small amount of silicone lubricant to the moving parts of the wheels.
• Harness is difficult to buckle/unbuckle: Ensure the buckles are aligned correctly. Clean any debris from the buckle mechanism.
• Stroller feels unstable: Ensure all frame locks are fully engaged. Do not exceed the maximum weight capacity for the child or the storage basket.

7. Specifications

Image: The Evenflo Legacy LX stroller frame displaying approximate dimensions: 72cm height, 52cm depth, 44cm width.

8. Warranty and Support

Evenflo products are manufactured to high-quality standards and are covered by a limited warranty. For specific warranty details, registration, or to contact customer support, please refer to the warranty card included with your product or visit the official Evenflo website. Keep your proof of purchase for warranty claims.

For further assistance, please contact Evenflo customer service through their official channels.