1. Introduction
The WeatherTech Roll Up Truck Bed Cover is engineered to provide superior protection for your truck bed and its contents. Designed for a custom fit on select Ford Super Duty models, this cover offers robust defense against the elements while enhancing the vehicle's aesthetics and aerodynamics. Its user-friendly design ensures quick and easy access to your truck bed whenever needed.
Image 1.1: WeatherTech Roll Up Truck Bed Cover on a Ford Super Duty truck.
2. Product Features
- Water-Resistant Design: Constructed from durable vinyl and aluminum, the cover forms a tight barrier at the front, back, and sides of your truck bed, protecting cargo from rain, wind, and snow.
- Custom Fit: Engineered to fit specific truck makes and models, ensuring a seamless and secure integration with your vehicle.
- Easy Operation: The cover opens and closes in seconds, providing convenient access to your truck bed.
- AutoLatch II Latching System: Features an automatic dual locking system that releases with a quick downward pull, offering excellent security when paired with a locked tailgate.
- Aerodynamic Profile: Its sleek, low-profile design reduces aerodynamic drag, potentially increasing your pickup's gas mileage.
- Oversized Cargo Accommodation: Can be easily folded up and secured out of the way using tough nylon straps, allowing for the transport of oversized cargo without limitations.
Image 2.1: The sleek, low-profile design of the cover on a truck.
3. Installation Guide
Installation of the WeatherTech Roll Up Truck Bed Cover is designed to be straightforward. While the product is engineered for ease of installation, it is recommended to consult the detailed official installation manual for specific step-by-step instructions and safety precautions.
A comprehensive PDF installation manual is available for download: Installation Manual (PDF).
Generally, the installation involves securing the cover's rails to the truck bed using clamps, ensuring a tight and secure fit without the need for drilling. Proper alignment and sealing are crucial for optimal weather protection.
4. Operating Instructions
4.1. Opening the Cover
- To open the cover, locate the AutoLatch II release cords at the rear of the cover, near the tailgate.
- Pull the release cord(s) downward to disengage the locking mechanism.
- Begin rolling the cover towards the cab of the truck. The cover will smoothly roll up, allowing full access to the truck bed.
- Once fully rolled, secure the cover using the integrated nylon straps and buckles to keep it in place during transit.
Image 4.1: Disengaging the AutoLatch II system.
4.2. Closing and Securing the Cover
- Unfasten the nylon straps holding the rolled-up cover.
- Gently unroll the cover towards the tailgate, ensuring it remains centered on the truck bed rails.
- As the cover reaches the tailgate, the AutoLatch II system will automatically engage, securing the cover in place.
- For enhanced security, ensure your truck's tailgate is locked. This prevents unauthorized access to the truck bed.
Image 4.2: Unrolling the cover for closure.
4.3. Product Operation Video
Video 4.3: Official WeatherTech video demonstrating the features and operation of the Roll Up Truck Bed Cover. This video highlights the ease of use, weather protection, and security features of the cover.
5. Maintenance and Care
Regular maintenance will ensure the longevity and optimal performance of your WeatherTech Roll Up Truck Bed Cover.
5.1. Cleaning
- Clean the vinyl surface with mild soap and water. Use a soft brush or cloth to remove dirt and debris.
- Rinse thoroughly with clean water and allow to air dry.
- Avoid using harsh chemicals, abrasive cleaners, or pressure washers, as these can damage the cover's material and finish.
5.2. Inspection
- Periodically inspect the cover for any signs of wear, tear, or damage to the vinyl, aluminum rails, or latching mechanisms.
- Check the seals along the edges of the cover to ensure they are intact and providing a tight barrier against water and debris.
- Ensure the AutoLatch II system operates smoothly and engages securely.
6. Troubleshooting
This section addresses common issues you might encounter with your truck bed cover.
| Problem | Possible Cause | Solution |
|---|---|---|
| Cover not sealing properly | Improper alignment; debris on seals; worn seals | Check alignment of rails and cover; clean seals thoroughly; inspect seals for damage and replace if necessary. |
| Difficulty rolling or unrolling | Obstruction on rails; dirty rails; damaged components | Clear any obstructions; clean rails; inspect rolling mechanism for damage. |
| Latching system not engaging | Misalignment; debris in latch; damaged latch mechanism | Ensure cover is properly aligned with tailgate; clean latch area; contact support if mechanism is damaged. |
| Water leakage | Improper installation; damaged seals; clogged drain tubes (if applicable) | Review installation manual for proper setup; inspect and replace damaged seals; clear any drain tubes. |
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | WeatherTech |
| Model | 8RC1336 |
| Style | Roll-Up |
| Exterior Finish | Aluminum |
| Material | Vinyl, Aluminum |
| Lock Type | Tailgate (works in conjunction with locked tailgate) |
| Item Weight | 37 pounds |
| Country of Origin | USA |
| UPC | 787765450065 |
| Compatibility | Select 2008-2016 Ford Super Duty Models |
8. Warranty and Support
WeatherTech products are known for their quality and durability. For specific warranty information regarding your Roll Up Truck Bed Cover, please refer to the official WeatherTech website or the documentation included with your purchase. Warranty terms typically cover manufacturing defects and material flaws.
For technical support, product inquiries, or assistance with warranty claims, please contact WeatherTech customer service directly. Contact details can usually be found on the official WeatherTech website or within your product packaging.
Visit the official WeatherTech Store for more information: WeatherTech Store
