Product Overview
The Paladone The Legend of Zelda Triforce Night Light is a decorative lamp inspired by the iconic Triforce from The Legend of Zelda series. It features a gold Triforce logo within a black plastic casing and projects the Hyrule logo onto nearby surfaces. The light can be powered by either batteries or a USB connection.
Image: The Triforce Night Light illuminated, showcasing its design.
What's in the Box
- Triforce Light
- Power Cable (Micro USB)
- User Manual
Setup
- Power Source Selection: The Triforce Night Light can be powered by either 3x AAA batteries (not included) or via the included Micro USB cable.
- Battery Installation: If using batteries, locate the battery compartment on the underside of the light. Open the compartment, insert 3x AAA batteries, ensuring correct polarity (+/-), and close the compartment securely.
- USB Power Connection: If using USB power, connect the Micro USB cable to the port on the light and plug the other end into a compatible USB power source (e.g., a USB wall adapter, computer USB port).
Image: Rear view of the light showing the battery compartment and USB port.
Image: The included Micro USB cable for power.
Operating Instructions
- Turning On/Off: Locate the power button on the back of the Triforce Night Light. Press the button once to turn the light on. Press it again to turn the light off.
- Hyrule Logo Projection: When the light is on, it will project the Hyrule logo onto nearby walls or surfaces from its side panels. Adjust the light's position to achieve the desired projection effect.
Image: A hand demonstrating how to press the power button on the light.
Image: The Hyrule crest projected onto a surface by the night light.
Demonstration Video
Video: A demonstration of the Triforce Night Light's features and operation, including the Hyrule logo projection.
Specifications
| Model Number | PP3026NNV3 |
| Product Dimensions | 3.5"D x 10.5"W x 7.5"H (8.9cm D x 26.7cm W x 19.1cm H) |
| Item Weight | 0.36 Kilograms |
| Material Type | Plastic |
| Finish Type | Matte |
| Light Source Type | LED |
| Power Source | Battery Powered (3x AAA, not included) or USB |
| Switch Type | Push Button |
| Indoor/Outdoor Usage | Indoor |
Image: Diagram illustrating the dimensions of the Triforce Night Light.
Maintenance
- Cleaning: Wipe the surface of the night light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: If using batteries, replace all three AAA batteries simultaneously when the light dims or stops functioning. Do not mix old and new batteries.
- Storage: When not in use for extended periods, remove batteries and store the light in a cool, dry place.
Troubleshooting
- Light does not turn on:
- Ensure batteries are correctly installed with proper polarity or that the USB cable is securely connected to a working power source.
- If using batteries, replace with fresh ones.
- Check the power button for any obstruction or damage.
- Light is dim:
- If using batteries, they may be low and require replacement.
- Ensure the USB power source is providing sufficient power.
- Hyrule logo projection is unclear:
- Adjust the distance of the light from the projection surface. Closer distances will result in a smaller, sharper image, while further distances will create a larger, softer image.
- Ensure the projection surface is flat and clear of obstructions.
Warranty and Support
This product is sold without a manufacturer's warranty. For any product inquiries or support, please refer to the retailer where the item was purchased.