Product Overview
The PWR+ 6Ft Long USB 2.0 Type-A to Type-B High Speed Cable is designed for reliable and efficient data transfer between a wide range of electronic devices. This cable features a Type-A male connector on one end and a Type-B male connector on the other, facilitating connections for audio interfaces, MIDI keyboards, USB microphones, mixers, speakers, monitors, instruments, and strobe light systems to laptops, Mac, and PC computers.
It also serves as a suitable replacement cord for various peripherals including printers, scanners, fax machines, hard drives, servers, and digital cameras. Engineered with high-grade copper and robust shielding, the cable supports transfer rates up to 480Mbps, ensuring error-free performance.
Image: The PWR+ USB 2.0 Type-A to Type-B cable, illustrating the Type-A and Type-B connectors.
Image: Internal construction diagram of the PWR+ USB cable, highlighting high-grade copper, aluminum foil shield, PVC cable jacket, wire insulation, and protective tinned copper braid for safe and reliable performance.
Setup
Follow these steps to connect your PWR+ USB 2.0 Type-A to Type-B cable:
- Identify Connectors: Locate the USB Type-A male connector (rectangular) and the USB Type-B male connector (square with two angled corners).
- Connect to Device: Insert the USB Type-B connector into the corresponding port on your peripheral device (e.g., audio interface, MIDI keyboard, printer). Ensure the connector is oriented correctly to avoid damage.
- Connect to Computer: Insert the USB Type-A connector into an available USB Type-A port on your computer (Laptop, Mac, or PC).
- MacBook Compatibility Note: Newer MacBook models typically feature USB-C ports instead of USB Type-A. If you are connecting to a MacBook with USB-C ports, you will need a separate USB-C to USB Type-A adapter (not included with this cable) to establish the connection.
Image: A close-up view of the USB Type-A and Type-B connectors, illustrating their distinct shapes for proper connection.
Operating Instructions
This cable is designed for plug-and-play operation. Once properly connected, your computer should automatically detect the connected device. No additional drivers are typically required for the cable itself, though your specific peripheral device may require its own software or drivers.
The cable supports high-speed data transfer up to 480Mbps, enabling efficient communication between your devices for tasks such as audio recording, MIDI data exchange, printing, and scanning.
Maintenance
To ensure the longevity and optimal performance of your PWR+ USB cable, please observe the following maintenance guidelines:
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid sharp bends, kinks, or excessive pulling on the cable, especially near the connectors, as this can damage the internal wiring.
- Cleaning: If necessary, gently wipe the cable and connectors with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Disconnection: Always grasp the connector housing when unplugging the cable, rather than pulling on the cord itself.
Image: The PWR+ USB cable neatly coiled, demonstrating proper storage to prevent damage.
Troubleshooting
If you encounter issues with your PWR+ USB cable, consider the following common solutions:
- Device Not Recognized:
- Ensure both ends of the cable are securely connected to their respective ports.
- Try connecting the cable to a different USB port on your computer.
- Test the cable with another compatible device to determine if the issue is with the cable or the original device.
- Verify that the drivers for your peripheral device are installed and up to date.
- Slow Data Transfer:
- Confirm that both your computer and the connected device support USB 2.0 speeds.
- Disconnect other high-bandwidth USB devices from your computer to free up resources.
- Ensure the cable is not excessively long for your application, as very long cables can sometimes experience signal degradation.
- Intermittent Connection:
- Check for any physical damage to the cable or connectors.
- Ensure the cable is not being bent or strained during use.
- Avoid placing the cable near sources of strong electromagnetic interference.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 6FTUSB-PRINT_AB |
| Cable Type | USB 2.0 Type-A to Type-B |
| Connector Type | USB Type A Male, USB Type B Male |
| Cable Length | 6 Feet (approx. 1.83 meters) |
| Data Transfer Rate | Up to 480Mbps (High-Speed USB 2.0) |
| Wire Gauge | 28AWG/2C+26AWG/2C |
| Product Dimensions | 6.1 x 3.5 x 1.1 inches; 2.08 ounces |
| Manufacturer | PWR+ |
| Safety Certification | CE/FCC/RoHS certified |
Image: UL Certification Logo, indicating product safety and quality compliance.
Warranty and Support
PWR+ cables are manufactured with the highest quality materials and are CE/FCC/RoHS certified.
This product is backed by a 30-Day Refund policy and a 24-Month Exchange Warranty. PWR+ is a Washington, USA-based company committed to providing friendly customer support.
For any inquiries or support needs, please visit the official PWR+ Store on Amazon.
Image: A stamp indicating a 2-year warranty, highlighting the product's reliability and manufacturer support.
