Introduction
The Escali DHRW1 Wireless Remote Food Thermometer and Timer is designed to assist in achieving precise cooking temperatures for various meats. This multifunction unit features an oven-safe probe, preset temperature alerts, and a built-in kitchen timer, allowing for monitoring food remotely.
Package Contents
- Thermometer Display Unit
- Wireless Transmitter Base
- Stainless Steel Oven-Safe Probe
- 4 AAA Batteries

Image: The main display unit, wireless transmitter base, and stainless steel probe of the Escali DHRW1 thermometer.
Features
- Wireless Remote Display: Monitor temperatures up to 200 feet (60 meters) away.
- Preset Target Cooking Temperatures: Includes settings for beef, lamb, veal, hamburger, pork, turkey, chicken, and fish.
- Custom Temperature Alert: Allows setting a specific target temperature.
- Oven-Safe Probe: Stainless steel probe and cord designed for high temperatures in ovens or grills.
- Timer Mode: Counts up or down to a maximum of 99 minutes and 59 seconds.
- Back-light Display: Large, easy-to-read display with automatic backlight shut-off.
- Display Stand or Belt Clip: Integrated kickstand and belt clip for versatile placement.

Image: Diagram highlighting key features of the Escali DHRW1, including presets, range, cord, display, temps, timer, and probe.
Setup
- Insert Batteries: Open the battery compartments on both the display unit and the wireless transmitter base. Insert the 4 AAA batteries, observing correct polarity.
- Connect Probe: Plug the stainless steel probe into the jack on the wireless transmitter base.
- Power On: Turn on both the display unit and the transmitter base using their respective ON/OFF switches.
- Pairing: The units should automatically pair. If not, ensure they are within range and try turning them off and on again.

Image: Rear view of the thermometer display unit, showing the battery compartment, belt clip, and kickstand.
Operation
Using the Thermometer
- Select Meat Type: Press the MEAT button to cycle through preset meat types (Beef, Lamb, Veal, Hamburger, Pork, Turkey, Chicken, Fish).
- Select Doneness (Taste): After selecting the meat, press the TASTE button to choose the desired level of doneness (e.g., Rare, Medium, Well). The target temperature will adjust automatically.
- Set Custom Temperature: To set a custom target temperature, press the MODE button until "SET TEMP" is displayed. Use the MIN/+ and SEC/- buttons to adjust the temperature. Press MODE again to confirm.
- Insert Probe: Carefully insert the stainless steel probe into the thickest part of the food, avoiding bones.
- Monitor Temperature: The display unit will show the current internal temperature of the food and the target temperature. An alarm will sound when the target temperature is reached.

Image: A user wearing the Escali DHRW1 display unit on a belt clip, demonstrating its portability during cooking.
Using the Timer
- Activate Timer Mode: Press the MODE button until "TIMER" is displayed.
- Set Countdown Timer: Use the MIN/+ and SEC/- buttons to set the desired countdown time (up to 99 minutes, 59 seconds). Press START/STOP to begin.
- Count-Up Timer: To use as a count-up timer, ensure the timer is set to 00:00, then press START/STOP.
- Stop/Reset Timer: Press START/STOP to pause or resume the timer. Press CLEAR to reset the timer to 00:00.
Video: An official product video demonstrating the features and use of the Escali DHRW1 Wireless BBQ/Meat/Fish Thermometer.
Care and Maintenance
- Cleaning: Wipe the display unit and transmitter base with a damp cloth. Do not immerse them in water. The stainless steel probe can be cleaned with warm, soapy water.
- Storage: Store the thermometer in a dry place when not in use.
- Battery Replacement: Replace batteries when the display becomes dim or the unit does not power on.
- Probe Care: Avoid bending or kinking the probe cord excessively. The probe is oven-safe but should not be exposed to direct flame.
Troubleshooting
| Problem | Solution |
|---|---|
| No display/Unit does not power on. | Check battery polarity. Replace batteries if necessary. Ensure both units are switched ON. |
| Incorrect temperature reading. | Ensure the probe is fully inserted into the thickest part of the food, away from bones. Verify the probe connection to the transmitter base. |
| No wireless connection. | Ensure both the display unit and transmitter base are powered on and within the 200-foot range. Reduce obstructions between units. |
| Timer not functioning. | Ensure the unit is in TIMER mode. Press START/STOP to activate. Press CLEAR to reset. |
Specifications
- Model: DHRW1
- Temperature Range: 32°F to 482°F (0°C to 250°C)
- Probe Length: 7.25 inches (18.4 cm)
- Cord Length: 40 inches (1 meter), Oven Safe
- Timer Range: 99 minutes, 59 seconds (maximum)
- Wireless Remote Display Range: 200 feet (60 meters)
- Power Source: 4 AAA batteries (included)
- Material: Stainless Steel (probe), Plastic (units)
- Display Type: Digital, Back-lit
Warranty and Support
For warranty information or technical support, please refer to the official Escali website or contact their customer service department. Keep your purchase receipt for warranty claims.





