1. Introduction
This manual provides essential information for the proper use and maintenance of your Monoprice SlimRun Cat6A Ethernet Patch Cables. These cables are designed for high-speed network connectivity in various environments, offering a compact and efficient solution for data transmission.
Included in the package: 5 Monoprice SlimRun Cat6A Ethernet Patch Cables (14 Feet, Black).
2. Product Features
The Monoprice SlimRun Cat6A Ethernet Patch Cables offer several key features:
- Slim Design: At approximately half the size of standard Cat6A cables (0.149" vs. 0.29"), these cables reduce congestion in high-density networking environments such as data centers and telecommunications rooms.
- High Performance: Supports 10 Gigabit Ethernet (10G) and operates at frequencies up to 550MHz, ensuring reliable high-speed data transfer.
- Pure Bare Copper Wire: Constructed with 30AWG pure bare copper wire for optimal signal integrity and performance, unlike copper-clad aluminum (CCA) alternatives.
- Snagless RJ45 Connectors: Features a snagless narrow boot design that protects the RJ45 connector clip from damage during installation and removal, making cable management easier.
- Universal Connectivity: Provides connectivity for a wide range of LAN network components including PCs, computer servers, printers, routers, switch boxes, network media players, NAS devices, VoIP phones, and Power over Ethernet (PoE) devices.
Image: A pack of five Monoprice SlimRun Cat6A Ethernet Patch Cables, showcasing their compact design and clear RJ45 connectors.
Image: A visual comparison illustrating the significantly smaller diameter of the SlimRun CAT6A cable (3.6mm) compared to a standard CAT6 cable (6.0mm).
3. Setup and Installation
These Ethernet patch cables are designed for simple plug-and-play installation. Follow these general steps to connect your network devices:
- Identify Ports: Locate the Ethernet (RJ45) ports on the devices you wish to connect (e.g., router, switch, computer, printer).
- Connect First Device: Insert one end of the Monoprice SlimRun Cat6A cable into the Ethernet port of your first device. Ensure the connector clicks securely into place. The snagless boot design helps prevent the clip from breaking.
- Route Cable: Carefully route the cable to your second device. The slim and flexible nature of these cables allows for easier routing in tight spaces or through cable management systems. Avoid sharp bends that could damage the cable.
- Connect Second Device: Insert the other end of the cable into the Ethernet port of your second device, ensuring a secure connection.
- Verify Connection: Check the network indicator lights on your devices (if available) to confirm a successful connection.
Image: A detailed view of the RJ45 connector with its protective snagless boot, designed to prevent damage to the locking tab.
Image: Multiple SlimRun Cat6A cables, in different colors, neatly connected to a patch panel, illustrating their effectiveness in reducing cable clutter in high-density setups.
4. Operating Instructions
Once connected, the Monoprice SlimRun Cat6A Ethernet Patch Cables operate automatically to facilitate network communication. They support full-duplex data transfer and are backward compatible with Cat6 and Cat5e standards, though performance will be limited by the lowest category device in the chain.
No specific software or drivers are required for the cables themselves. Ensure your connected devices are properly configured for network access according to their respective manuals.
5. Maintenance
To ensure the longevity and optimal performance of your Monoprice SlimRun Cat6A Ethernet Patch Cables, consider the following maintenance guidelines:
- Avoid Extreme Bends: While flexible, excessive or sharp bending can damage the internal conductors. Maintain a reasonable bend radius.
- Protect Connectors: The snagless design helps, but avoid pulling on the cable itself when disconnecting. Always grasp the RJ45 connector body.
- Keep Clean: Dust and debris can accumulate on connectors. Use a clean, dry cloth to gently wipe the connectors if necessary.
- Storage: When not in use, coil cables loosely and store them in a dry, temperate environment away from direct sunlight or extreme temperatures.
6. Troubleshooting
If you encounter issues with your network connection, perform the following basic troubleshooting steps:
- No Connection:
- Ensure both ends of the Ethernet cable are securely plugged into their respective ports. Listen for a click.
- Try using a different port on your router/switch.
- Test with a different, known-working Ethernet cable to rule out device issues.
- Slow Connection Speed:
- Verify that all network devices (router, switch, network adapter) support Cat6A or 10 Gigabit Ethernet speeds. Performance will be limited by the slowest component.
- Ensure the cable is not damaged, kinked, or run alongside high-voltage power lines, which can cause interference.
- Restart your network devices (modem, router, computer).
- Intermittent Connection:
- Check for loose connections at both ends of the cable.
- Inspect the RJ45 connectors for any bent pins or damage.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Monoprice |
| Model Number | 115145 |
| Cable Type | Cat6A Ethernet Patch Cable |
| Connector Type | RJ45 |
| Wire Gauge | 30AWG |
| Conductor Material | Pure Bare Copper |
| Bandwidth | 550MHz |
| Data Transfer Speed | Up to 10 Gigabit Ethernet (10G) |
| Special Feature | Flexible, Snagless Boot Design |
| Compatible Devices | PC, Printer, Router, Server, Network Media Players, NAS, VoIP Phones, PoE Devices |
| Product Dimensions | 8 x 9 x 2 inches (packaging); 0.64 ounces (per cable, approx.) |
| First Available Date | March 25, 2016 |
8. Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the official Monoprice website or contact Monoprice customer service directly. Details are typically available in the product packaging or on the manufacturer's support pages.
Monoprice Website: www.monoprice.com
