Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Teamson Home 119 GPH Water Pump. Please read all instructions carefully before use and retain this manual for future reference.
The Teamson Home 119 GPH Water Pump is designed for circulating water in various outdoor and indoor water features, including fountains, garden ponds, and birdbaths. Its compact design and quiet operation make it suitable for enhancing the ambiance of your water feature.
Safety Information
WARNING: To avoid electric shock, use only with a properly grounded, ground fault circuit interrupter (GFCI) protected receptacle. Do not remove the grounding pin from the plug.
- Always disconnect the pump from the power supply before handling, cleaning, or performing any maintenance.
- Ensure the pump is fully submerged in water during operation to prevent overheating and damage.
- Do not operate the pump with a damaged cord or plug. If the cord is damaged, the pump should be discarded.
- This pump is designed for freshwater use only. Do not use with flammable liquids or in environments with corrosive materials.
- Keep children and pets away from the water feature while the pump is operating.
- Do not lift the pump by its power cord.
Setup
Follow these steps for proper installation of your water pump:
- Unpack and Inspect: Carefully remove all components from the packaging. Inspect the pump and accessories for any signs of damage.
- Choose Nozzle: Select one of the three included nozzle sizes (0.31", 0.51", 0.62") that best suits your water feature's desired flow and attach it securely to the pump's outlet.
- Placement: Place the pump at the bottom of your water feature, ensuring it is fully submerged. The pump features four suction cup feet for secure placement and to help reduce vibration and noise.
Image: The Teamson Home 119 GPH Water Pump, showing its compact black body, attached power cord, and two included nozzle adapters.
Image: A visual representation of the water pump's multiple water flow options, demonstrating how different nozzle sizes (0.31", 0.51", 0.62") affect the water stream.
Image: A diagram illustrating the secure placement of the water pump using its four suction cup feet, designed to prevent movement and reduce operational noise.
- Water Level: Ensure the water level in your feature is sufficient to completely cover the pump.
- Power Connection: Connect the 6-foot power cord to a GFCI-protected electrical outlet.
Operating Instructions
Once properly installed, the pump is ready for operation:
- Power On: Plug the pump into the GFCI-protected outlet. The pump will begin circulating water immediately.
- Water Flow: The pump provides a maximum flow rate of 119 Gallons Per Hour (GPH) and can achieve a maximum lifting height of 40 inches.
- Quiet Operation: This pump is designed for quiet operation, minimizing disruption to the natural ambiance of your water feature.
- Energy Efficiency: The pump features an energy-saving design for efficient operation.
Image: An infographic summarizing the key technical details of the pump, including its submersible nature, 119 GPH flow rate, multiple nozzles, 6-foot power cord, 20-gallon circulation capacity, freshwater use, 40-inch water lift, quiet operation, and ETL certification.
Image: A detailed view of the pump highlighting its compact size (2.52" L x 1.73" W x 2.24" H) and performance capabilities, including a 40" water lift and 450 l/h flow rate.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your pump:
- Cleaning: Periodically clean the pump to remove any accumulated debris, algae, or mineral deposits. Disconnect power, remove the pump from the water, and gently clean the intake screen and impeller area with a soft brush and clean water.
- Check Water Level: Always maintain an adequate water level to keep the pump fully submerged. Running the pump dry can cause severe damage.
- Inspect Cord: Regularly check the power cord for any cuts, abrasions, or damage. Replace the pump if the cord is damaged.
- Winterization: If you live in an area with freezing temperatures, remove the pump from the water feature before the first freeze. Clean it thoroughly, dry it, and store it in a frost-free location.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not operate | No power; clogged intake; impeller jammed | Check power connection and GFCI; clean intake screen; clear impeller of debris. |
| Low water flow | Clogged intake/nozzle; low water level; kinked tubing | Clean intake and nozzle; add water to feature; straighten tubing. |
| Excessive noise/vibration | Not fully submerged; debris in impeller; unstable placement | Ensure full submersion; clean impeller; secure pump with suction cups on a flat surface. |
Specifications
- Brand: Teamson Home
- Model: PT-707MIX
- Color: Black
- Material: Plastic
- Product Dimensions: 2.52" L x 1.73" W x 2.24" H
- Power Source: Corded Electric
- Item Weight: 0.64 Pounds (10.2 ounces)
- Maximum Flow Rate: 119 GPH (1.98 Gallons Per Minute)
- Maximum Lifting Height: 40 Inches
- Voltage: 12 Volts (DC)
- Wattage: 7 watts
- Included Components: Water Pump, Nozzle Adapters, Installation Guide
Warranty
This Teamson Home water pump comes with a 30-day warranty against manufacturer defects. Please retain your proof of purchase for any warranty claims.
Support
For further assistance, technical support, or to inquire about replacement parts, please contact Teamson Home customer service. Refer to the contact information provided with your product packaging or visit the official Teamson Home website.
