Rockville BPA10

Rockville BPA10 10" Powered PA DJ Speaker Instruction Manual

Model: BPA10 | Brand: Rockville

1. Introduction

The Rockville BPA10 is a 10-inch 400W Peak / 100W RMS Powered PA DJ Speaker designed for various audio applications. It features Bluetooth connectivity, a USB/SD player, FM radio, and multiple input options including XLR, RCA, 1/4", and Aux. This manual provides detailed instructions for setting up, operating, and maintaining your BPA10 speaker.

Rockville BPA10 10-inch Powered PA Speaker front view

Image 1: Front view of the Rockville BPA10 10-inch Powered PA Speaker.

2. What's in the Box

  • Rockville BPA10 10" Powered PA DJ Speaker (2 units for 2-piece package)
  • Wireless Remote Control
  • Power Cable
Included accessories: power cable and remote control

Image 2: Included accessories: power cable and remote control.

3. Setup

3.1. Mounting the Speaker

The BPA10 speaker features a 35mm pole socket for mounting on a speaker stand. To mount the speaker:

  1. Loosen the locking knob on the bottom of the speaker.
  2. Align the pole mount with the top of your speaker stand.
  3. Carefully lower the speaker onto the stand.
  4. Tighten the locking knob on the bottom of the speaker to secure it in place.
Bottom view of Rockville BPA10 speaker showing 35mm pole mount socket

Image 3: Bottom view of the Rockville BPA10 speaker, highlighting the 35mm pole mount socket.

3.2. Powering On

To power on your BPA10 speaker:

  1. Connect the female end of the included power cable to the AC input on the rear panel of the speaker.
  2. Plug the male end of the power cable into a standard power outlet.
  3. Flip the power switch on the rear panel to the 'ON' position. The power LED will illuminate.

4. Operating the Speaker

4.1. Rear Panel Overview

The rear panel of the BPA10 speaker features various inputs, outputs, and controls:

Rear panel of Rockville BPA10 speaker with all controls labeled

Image 4: Rear panel of the Rockville BPA10 speaker, showing all controls and connections.

Close-up of Rockville BPA10 rear panel controls

Image 5: Close-up view of the Rockville BPA10 rear panel controls.

4.2. Microphone and Line Inputs (Channel 1)

Channel 1 offers both XLR and 1/4" TRS inputs. A 'LINE/MIC' switch allows you to select the input type.

  • Microphone Input: Connect a microphone to the XLR input. Press the 'LINE/MIC' button IN for microphone mode. Adjust the 'VOLUME 1' knob to control the microphone level.
  • Line Input: Connect an instrument (e.g., keyboard, guitar) or other line-level audio source to the 1/4" TRS input. Ensure the 'LINE/MIC' button is OUT for line mode. Adjust the 'VOLUME 1' knob to control the line input level.

Video 1: This video demonstrates how to set up your BPA10 speaker, including connecting microphones and instruments.

4.3. Auxiliary and RCA Line Inputs (Channel 2)

Channel 2 provides 1/8" Aux and RCA inputs for connecting external audio devices. Adjust the 'VOLUME 2' knob to control the level for these inputs.

4.4. Bluetooth, USB/SD, and FM Radio

The BPA10 features an integrated MP3 player with Bluetooth, USB, SD card, and FM radio capabilities. Use the 'MODE' button to switch between these sources. Playback controls (Play/Pause, Previous, Next, Repeat) are available on the rear panel. The 'MP3 VOLUME' knob controls the overall volume for these sources.

  • Bluetooth: Press 'MODE' until 'BLUE' appears on the display. On your smartphone or tablet, search for 'BPA10' in your Bluetooth settings and connect.
  • USB/SD: Insert a USB drive or SD card with MP3 files. The speaker will automatically switch to USB/SD mode and begin playback.
  • FM Radio: Press 'MODE' until FM radio is selected. Use the playback controls to scan and select stations.

Video 2: This video provides an overview of the BPA10's features, including its various inputs, outputs, and media playback options.

4.5. Equalizer

The equalizer section allows you to adjust the tone of the audio output:

  • TREBLE: Adjusts the high-frequency response. Turn clockwise to boost treble, counter-clockwise to cut.
  • BASS: Adjusts the low-frequency response. Turn clockwise to boost bass, counter-clockwise to cut.

5. Connecting Multiple Speakers (Daisy Chaining)

You can link multiple BPA10 speakers together using the XLR Line Out and Line In connections.

  1. Connect an XLR cable from the 'LINE OUT' of the first BPA10 speaker to the 'MIC/LINE INPUT' (XLR) of the second BPA10 speaker.
  2. Ensure the 'LINE/MIC' switch on the second speaker's input is set to 'LINE' mode (button OUT).
  3. Adjust 'VOLUME 1' on the second speaker to match the desired output level.

Video 3: This video demonstrates how to link two BPA10 speakers together for a larger sound system.

6. Connecting to a Mixer

To connect your BPA10 speakers to an external mixer:

  1. Connect XLR cables from the main outputs of your mixer to the 'MIC/LINE INPUT' (XLR) of each BPA10 speaker.
  2. Ensure the 'LINE/MIC' switch on each speaker's input is set to 'LINE' mode (button OUT).
  3. Adjust 'VOLUME 1' on each speaker and the main mix level on your mixer to achieve the desired sound.

Video 4: This video guides you through setting up your BPA10 speakers with a mixer.

7. Connecting to a Subwoofer

You can connect your BPA10 speaker to a powered subwoofer for enhanced low-frequency response:

  1. Connect an XLR cable from the 'LINE OUT' of the BPA10 speaker to the line input of your powered subwoofer.
  2. Adjust the volume level on your subwoofer to balance with the BPA10 speaker.

Video 5: This video explains how to connect your BPA10 speaker to a subwoofer.

8. Karaoke Setup

The BPA10 is ideal for karaoke setups:

  1. Connect your microphone to the 'MIC/LINE INPUT' (XLR) on the BPA10 and set the switch to 'MIC' mode.
  2. Pair your smartphone or tablet via Bluetooth to the BPA10.
  3. Use a karaoke app or YouTube to play instrumental tracks with lyrics.
  4. Adjust the microphone volume ('VOLUME 1') and music volume ('MP3 VOLUME') to your preference.

Video 6: This video demonstrates how to set up your BPA10 for a karaoke session.

9. Specifications

  • Brand: Rockville
  • Model Number: BPA10
  • Speaker Maximum Output Power: 800 Watts
  • Frequency Response: 20 Hz - 20 KHz
  • Connectivity Technology: Bluetooth, RCA, TRS, USB, XLR
  • Audio Output Mode: Stereo
  • Mounting Type: Speaker Pole Mount
  • Enclosure Material: Plastic
  • Speaker Type: Professional PA Speaker
  • Additional Features: Equalizer
  • Subwoofer Diameter: 10 Inches
  • Controller Type: Remote Control
  • Color: Black
  • Is Waterproof: FALSE
  • Warranty Type: Limited
  • Maximum Range (Bluetooth): 32 Feet
  • Control Method: Remote
  • Speaker Size: 10 Inches
  • Woofer Diameter: 10 Inches
  • Water Resistance Level: Not Water Resistant
  • MP3 player: Yes
  • Specific Uses For Product: Live events, performances, public address systems
  • Unit Count: 2.0 Count
  • Item Dimensions D x W x H: 12.41"D x 11.5"W x 19.31"H
  • Item Weight: 41 Pounds
  • Compatible Devices: Smartphone, Tablet, Laptop
  • Power Source: Corded Electric
  • Input Voltage: 110 Volts (AC)
  • Number of Audio Channels: 2.0
  • Impedance: 8 Ohms
  • Wireless Technology: Bluetooth
  • Subwoofer Connectivity Technology: Wireless
  • Connectivity Protocol: Bluetooth
  • Audio Driver Type: Dynamic Driver
  • Audio Driver Size: 10 Inches

10. Troubleshooting

If you encounter any issues with your Rockville BPA10 speaker, please refer to the following common troubleshooting steps:

  • No Power: Ensure the power cable is securely connected to both the speaker and a working power outlet. Check the power switch position.
  • No Sound: Verify all audio cables are correctly connected. Check the volume levels on the speaker, connected devices, and any external mixers. Ensure the correct input mode is selected (LINE/MIC switch, MODE button for MP3/Bluetooth).
  • Distorted Sound: Reduce the volume levels on the speaker and connected devices. Check for damaged cables. Ensure the input signal is not too strong (avoid clipping, indicated by the 'CLIP' LED).
  • Bluetooth Connection Issues: Ensure the speaker is in Bluetooth mode ('BLUE' on display). Make sure your device's Bluetooth is enabled and within range. Forget the device from your phone's Bluetooth list and try pairing again.
  • USB/SD Playback Issues: Ensure the USB drive or SD card is formatted correctly (FAT32) and contains compatible audio files (MP3). Try a different USB drive or SD card.

11. Maintenance

To ensure the longevity and optimal performance of your Rockville BPA10 speaker, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the speaker. Do not use abrasive cleaners or solvents.
  • Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Always handle the speaker with care. Avoid dropping it or subjecting it to strong impacts.
  • Ventilation: Ensure proper ventilation around the speaker to prevent overheating. Do not block any ventilation openings.

12. Warranty & Support

The Rockville BPA10 speaker comes with a 1-Year Manufacturer Warranty.

For technical assistance, troubleshooting, or warranty inquiries, please contact Rockville Customer Support:

  • Phone: 1-646-758-0144 (Open 24/7)
  • Email: sales@rockvilleaudio.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.