1. Introduction
This manual provides essential information for the safe and efficient operation of your OttLite LED FlexNeck Table Lamp. Please read these instructions thoroughly before use and retain them for future reference.
The OttLite LED FlexNeck Table Lamp is designed to provide natural daylight illumination, featuring a flexible neck for adjustable lighting, three brightness settings, and a convenient USB charging port.
2. Product Overview and Components
Familiarize yourself with the main components of your OttLite LED FlexNeck Table Lamp:
- LED Light Head: Emits natural daylight LEDs.
- Flexible Neck: Allows for precise positioning of the light.
- Touch Control: Located on the base for power and brightness adjustments.
- USB Charging Port: Integrated into the base for charging compatible devices.
- Stable Base: Provides support for the lamp.
Image 2.1: Labeled diagram of the OttLite LED FlexNeck Table Lamp components.
3. Setup
Follow these steps to set up your lamp:
- Unpack: Carefully remove all components from the packaging.
- Placement: Place the lamp base on a stable, flat surface. Ensure the base diameter of 4.75 inches (11.6 cm) is fully supported.
- Connect Power: Insert the included A/C adapter into the power port on the lamp base, then plug the adapter into a standard 120-volt electrical outlet.
Image 3.1: Lamp dimensions and height adjustment range.
4. Operating Instructions
4.1 Power and Brightness Control
The lamp features a touch-sensitive control button on its base:
- Power On/Off: Lightly touch the control button to turn the lamp on or off.
- Brightness Settings: The lamp has three brightness levels. Each subsequent touch of the control button will cycle through the brightness settings (Low, Medium, High) before turning off.
4.2 Flexible Neck Adjustment
The flexible neck allows you to direct the light precisely where needed. Gently bend and position the neck to achieve your desired lighting angle and height. The lamp's height can adjust from 11 inches (27.9 cm) to 26.8 inches (68.3 cm).
4.3 USB Charging Port
A USB charging port is located on the lamp's base. Connect your mobile device's USB charging cable to this port to charge your device. The USB port provides 5V, 2.1A output.
Image 4.1: Detail of the touch-sensitive control and flexible neck.
5. Maintenance
To ensure the longevity and optimal performance of your lamp:
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe the lamp. Avoid abrasive cleaners or solvents.
- LEDs: The integrated LEDs are designed for long life (up to 40,000 hours) and are not user-replaceable.
- Storage: If storing the lamp, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.
6. Troubleshooting
If you encounter issues with your OttLite LED FlexNeck Table Lamp, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power connection. | Ensure the A/C adapter is securely plugged into both the lamp and a working electrical outlet. Test the outlet with another device. |
| USB port is not charging devices. | Device not compatible or cable issue. | Verify your device is compatible with 5V, 2.1A USB charging. Try a different USB cable. Ensure the lamp is powered on. |
| Lamp flickers or light is inconsistent. | Loose connection or power fluctuation. | Check all power connections. Try plugging the lamp into a different outlet. |
| Lamp base feels unstable. | Uneven surface or improper placement. | Ensure the lamp is placed on a completely flat and stable surface. Avoid extending the flexible neck too far horizontally without proper counter-balance. |
If the problem persists after attempting these solutions, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | A59G5B-FFP |
| Brand | OttLite |
| Lamp Type | Desk Lamp |
| Light Source Type | LED |
| Light Output Maximum | 300 Lumens |
| Brightness Settings | 3 (Touch-controlled) |
| Flexible Neck Height Adjustment | 11 to 26.8 inches (27.9 cm to 68.3 cm) |
| Base Diameter | 4.75 inches (11.6 cm) |
| USB Charging Port Output | 5V, 2.1A |
| Power Source | Corded Electric |
| Wattage | 10 watts |
| Voltage | 120 Volts |
| Product Dimensions (D x W x H) | 10"D x 4.63"W x 16.25"H |
| Item Weight | 2.94 pounds |
| Base Material | Rubber |
| Certification | UL Listed |
| UPC | 761712010991 |
8. Warranty Information
OttLite provides a warranty for its products. Warranty coverage for OttLite lamps and accessories (excluding batteries) is for 2 years from the date of purchase. OttLite bulbs are covered for 1 year from the date of purchase. This warranty does not cover damages resulting from the use of the product for any purpose other than its intended use. Additionally, warranty coverage excludes OttLite items purchased "as is" or from unauthorized retailers.
9. Support Information
For further assistance, product inquiries, or warranty claims, please visit the official OttLite website or contact their customer support directly. Refer to the product packaging or the OttLite website for the most current contact information.
