Introduction
This manual provides instructions for the safe and efficient use of your Ball FreshTech Harvest Pro Sauce Maker. This appliance is designed to process fresh fruits and vegetables into sauces, purees, and other food preparations. Please read all instructions carefully before operating the machine and retain this manual for future reference.
Image: The Ball FreshTech Harvest Pro Sauce Maker in its assembled state, featuring a gray and black body with a large top hopper and an extrusion chute.
Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
- Read all instructions.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical shock, do not immerse cord, plugs, or appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
Setup and Assembly
Before first use, ensure all packaging materials are removed and all parts are clean. Refer to the 'Cleaning and Maintenance' section for initial cleaning instructions.
Assembly Steps:
- Place the motor base on a stable, flat, and dry surface.
- Align the processing chamber with the motor base and secure it using the UniLock system. Ensure it clicks into place.
- Insert the auger into the processing chamber.
- Attach the screen and end cap to the processing chamber.
- Place the large nesting hopper onto the top of the processing chamber.
- Position the splash guard over the chute opening.
Image: The UniLock system, showing the processing chamber detached from the motor base for easy assembly and cleaning.
Operating Instructions
The Ball FreshTech Harvest Pro Sauce Maker is designed for efficient processing of various fruits and vegetables into sauces, purees, and more.
Preparation of Ingredients:
- Wash all fruits and vegetables thoroughly.
- For best results, remove any hard seeds, pits, or stems that could damage the machine or affect the texture of the sauce.
- The extra-wide 2.5-inch chute minimizes the need for extensive chopping, but larger items may benefit from being cut into smaller pieces to fit comfortably into the hopper.
Image: A close-up view highlighting the extra-wide 2.5-inch chute, designed to reduce chopping and prep time.
Processing Steps:
- Ensure the appliance is properly assembled and plugged into a grounded electrical outlet.
- Place a collection bowl or container under the sauce output chute and another for waste pulp.
- Turn the power switch to the 'ON' position.
- Carefully feed prepared fruits or vegetables into the large nesting hopper. Use the food pusher provided to guide ingredients down the chute. Never use your fingers or other utensils to push food.
- The machine will separate the pulp and seeds from the smooth sauce.
- Continue feeding ingredients until all desired produce is processed. The machine can process up to 15 quarts of fresh tomato puree in approximately 20 minutes.
- Once finished, turn the power switch to the 'OFF' position and unplug the appliance.
Image: The sauce maker in operation, showing the large capacity nesting hopper filled with chopped tomatoes and processed sauce collecting in a bowl.
Cleaning and Maintenance
Regular cleaning ensures the longevity and hygienic operation of your sauce maker. Always unplug the appliance before cleaning.
Disassembly for Cleaning:
- Ensure the machine is unplugged and cooled.
- Use the UniLock system to detach the processing chamber from the motor base.
- Remove the hopper, splash guard, end cap, screen, and auger from the processing chamber.
Cleaning Instructions:
- All detachable parts (hopper, splash guard, processing chamber, auger, screen, end cap) are dishwasher safe for convenient cleaning.
- Alternatively, wash these parts by hand with warm, soapy water and a non-abrasive sponge. Rinse thoroughly and dry completely before reassembly or storage.
- The motor base should be wiped clean with a damp cloth. Never immerse the motor base in water or any other liquid.
- Ensure the unique silicone wiper within the processing chamber is clean to prevent clogging and maximize yield.
Storage:
Store the clean and dry appliance in a cool, dry place. The large nesting hopper and built-in cord pocket allow for compact storage.
Troubleshooting
If you encounter issues with your Ball FreshTech Harvest Pro Sauce Maker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | Not plugged in; power outlet malfunction; appliance not assembled correctly. | Ensure power cord is securely plugged in. Test outlet with another appliance. Check that the processing chamber is correctly locked onto the motor base. |
| Food is not processing or machine is struggling. | Clogging due to large pieces or hard ingredients; screen is blocked. | Turn off and unplug the machine. Disassemble and clear any blockages from the auger and screen. Ensure ingredients are appropriately sized and free of hard pits/seeds. |
| Excessive pulp in sauce. | Screen is clogged or damaged; ingredients not suitable. | Clean the screen thoroughly. Ensure the silicone wiper is clean and intact. Some ingredients naturally produce more pulp. |
| Machine is noisy or vibrating excessively. | Improper assembly; foreign object inside; unstable surface. | Check that all parts are securely assembled. Turn off and inspect for foreign objects. Ensure the appliance is on a stable, flat surface. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Ball |
| Model Number | 1440035018 |
| Colour | Gray |
| Product Dimensions | 51.31 x 23.88 x 33.53 cm |
| Capacity | 15 quarts (puree) |
| Power/Wattage | 150 watts |
| Material | Plastic |
| Special Features | Dishwasher Safe (parts), Manual |
| Item Weight | 4.45 kg |
| ASIN | B01B7A9RN2 |
| Manufacturer | Ball |
Warranty Information
Specific warranty details for the Ball FreshTech Harvest Pro Sauce Maker are typically provided with the product packaging or can be found on the manufacturer's official website. Please refer to the documentation included with your purchase for the most accurate and up-to-date warranty terms and conditions.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact Ball customer service. Contact information can usually be found on the product packaging or the official Ball website. When contacting support, please have your model number (1440035018) and purchase date available.
