1. Product Overview
This manual provides comprehensive instructions for the Tork SCA Xpres snap Signature Napkin Dispenser, model 623200. This tabletop dispenser is engineered for efficient, one-at-a-time napkin dispensing, contributing to reduced waste and enhanced hygiene in various settings. Its sleek black design ensures it complements diverse environments.
Figure 1: Tork SCA Xpres snap Signature Napkin Dispenser 623200, Black.
Key Features:
- Sleek, compact design for tabletop use.
- One-at-a-time napkin dispensing (N4 system) to minimize consumption.
- Durable plastic construction in black finish.
- Capacity to hold approximately 250 Tork Xpressnap N4 system napkins.
2. Setup and Loading Napkins
2.1. Unpacking the Dispenser
Carefully remove the napkin dispenser from its packaging. Inspect the unit for any signs of damage during transit. Ensure all components are present.
2.2. Loading Napkins
Follow these steps to load napkins into your dispenser:
- Locate the two release buttons positioned on each side of the dispenser's top cover.
- Press both buttons simultaneously and firmly to unlock the top cover. Gently lift the cover to open the dispenser.
- Take a stack of Tork Xpressnap N4 system napkins. Ensure the napkins are folded correctly and align them with the internal dispensing mechanism. The dispenser features a spring-loaded base that will push the napkins upwards for easy access.
- Carefully lower the top cover until it snaps securely into place. Verify that the cover is fully closed to ensure proper dispensing.
Figure 2: Napkin dispenser with napkins ready for use.
3. Operating Instructions
3.1. Dispensing Napkins
To obtain a napkin, simply grasp the exposed edge of the top napkin and pull it upwards. The dispenser's design ensures that only one napkin is presented at a time, which helps to control usage and maintain a tidy appearance. The next napkin will automatically be presented for the next user.
4. Care and Maintenance
4.1. Cleaning
To maintain the appearance and hygiene of your dispenser, regularly wipe the exterior surfaces with a soft, damp cloth. A mild soap solution can be used for more thorough cleaning. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the plastic finish. Ensure the dispenser is completely dry before reloading napkins or placing it back into service.
4.2. Refilling
When the napkin supply becomes low, follow the instructions provided in Section 2.2, "Loading Napkins," to refill the dispenser. Regular refilling ensures that napkins are always available for users.
5. Troubleshooting
This section addresses common issues you might encounter with your Tork SCA Xpres snap Signature Napkin Dispenser.
| Problem | Possible Cause | Solution |
|---|---|---|
| Napkins not dispensing smoothly |
|
|
| Dispenser cover difficult to open | Release buttons not pressed simultaneously or fully. | Press both side buttons firmly and simultaneously until the cover releases. |
| Dispenser appears unstable on surface | Not placed on a flat, stable surface. | Ensure the dispenser is positioned on a level and secure countertop or table. |
6. Specifications
- Model: 623200
- Brand: Tork
- Color: Black
- Material: Plastic
- Product Dimensions (Depth x Width x Height): 5.9"D x 7.9"W x 6.1"H
- Capacity: Approximately 250 napkins (Tork Xpressnap N4 system)
- Item Weight: 1.6 pounds
- System: N4
7. Warranty and Support
For detailed warranty information, product registration, or technical support, please visit the official Tork website or contact Tork customer service directly. Warranty terms and conditions may vary based on your region and the retailer from whom the product was purchased. Please retain your proof of purchase for warranty claims.
