Audio-Technica ATH-E70

Audio-Technica ATH-E70 Professional In-Ear Monitor Headphones

User Manual

Introduction

The Audio-Technica ATH-E70 Professional In-Ear Monitor Headphones are designed for sound professionals who require exceptional accuracy and detail for critical monitoring on stage or mixing in the studio. Featuring three balanced armature drivers, these headphones deliver an accurate and extended response across the entire audio frequency range, providing a high-resolution audio experience and a precise sound stage.

This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your ATH-E70 headphones. Please read it thoroughly before use to ensure optimal performance and longevity of your product.

What's in the Box

Upon opening your ATH-E70 package, please verify that all the following items are included:

  • ATH-E70 In-Ear Monitor Headphones
  • Detachable Cable (1.6 m / 63 inches)
  • Carrying Case
  • Silicone Eartips (XS, S, M, L)
  • Comply Foam Eartips (M size)
  • 6.3mm (1/4") Plug-on Adapter
Contents of the Audio-Technica ATH-E70 package, including headphones, detachable cable, carrying case, silicone eartips, Comply foam eartips, and a 6.3mm adapter.

Image: The ATH-E70 headphones, detachable cable, various eartips, 6.3mm adapter, and the protective carrying case.

Setup

1. Attaching the Cable

  1. Align the connector on the cable with the receptacle on the earpiece. The connectors are designed to fit in only one orientation.
  2. Gently push the connector into the earpiece until it clicks securely into place. Ensure a firm connection to prevent signal loss.
  3. To detach, firmly grasp the earpiece and the cable connector, then pull them apart. Do not pull on the cable itself.
Close-up of the detachable cable being connected to the Audio-Technica ATH-E70 earpiece, showing the A2DC connector.

Image: Detailed view of the A2DC detachable cable connection to the earpiece.

2. Choosing and Installing Eartips

Selecting the correct eartip size is crucial for sound quality, bass response, and noise isolation. Experiment with the included silicone and Comply foam eartips to find the best fit for your ears.

  • Silicone Eartips: Available in XS, S, M, L sizes. Provide a comfortable fit and good seal.
  • Comply Foam Eartips: One pair of M-size Comply foam eartips is included. These expand to fill the ear canal, offering superior isolation and a secure fit.
  1. Gently remove the pre-installed eartips by pulling them off the nozzle.
  2. Select your desired eartip size and type. For foam tips, compress the foam before inserting.
  3. Push the new eartip onto the nozzle until it is securely seated.
Various sizes of silicone eartips and Comply foam eartips for the ATH-E70 headphones.

Image: A selection of silicone and Comply foam eartips provided with the ATH-E70.

3. Wearing the Headphones

The ATH-E70 headphones are designed to be worn with the cable looping over your ears for a secure and comfortable fit, especially during active use or extended listening sessions.

  1. Identify the left (L) and right (R) earpieces.
  2. Gently loop the cable segment over the top of each ear.
  3. Insert the earpieces into your ear canals. Adjust them until you achieve a comfortable and snug seal. The flexible memory cable segments can be molded to fit the contour of your ears.
A person demonstrating the correct way to wear the Audio-Technica ATH-E70 headphones with the cable looped over the ear.

Image: Proper wearing technique for the ATH-E70, showing the over-ear cable loop.

Operating Instructions

Connecting to Audio Devices

The ATH-E70 headphones feature a 3.5mm (1/8") stereo mini-plug, compatible with most portable music players, smartphones, and computer headphone outputs. For professional audio equipment with 6.3mm (1/4") jacks, use the included plug-on adapter.

  1. Ensure the volume on your audio device is set to a low level before connecting the headphones.
  2. Insert the 3.5mm mini-plug into your device's headphone jack.
  3. If connecting to a 6.3mm jack, attach the 6.3mm adapter to the 3.5mm mini-plug, then insert into the device.
  4. Gradually increase the volume on your audio device to a comfortable listening level.
Diagram showing various connection examples for the ATH-E70 headphones, including smartphones, PCs with audio interfaces, and gaming consoles.

Image: Connection examples for the ATH-E70 with different audio sources.

Volume Adjustment

Volume control is managed directly through your connected audio device. The ATH-E70 headphones do not feature inline volume controls.

Maintenance

Cleaning

  • Earpieces: Wipe the earpieces with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Eartips: Silicone eartips can be removed and washed with mild soap and water. Ensure they are completely dry before reattaching. Comply foam eartips should be replaced periodically as they cannot be washed.
  • Cable: Wipe the cable with a soft, dry cloth.

Storage

When not in use, store your ATH-E70 headphones in the provided rugged carrying case to protect them from dust, dirt, and physical damage. This helps maintain their performance and appearance over time.

The rugged black carrying case for the Audio-Technica ATH-E70 headphones, shown open with the headphones and cable stored inside.

Image: The ATH-E70 headphones stored in their protective carrying case.

Troubleshooting

ProblemPossible CauseSolution
No sound or low volumeVolume too low on device; cable not fully connected; incorrect eartip fit.Increase device volume; ensure cable is securely attached to earpieces and device; try different eartip sizes for a better seal.
Sound distortion or poor qualityCable connection issues; audio source problem; earpieces dirty.Check all cable connections; test with a different audio source; clean earpieces and eartips.
Headphones fall out easilyIncorrect eartip size; cable not properly looped over ears.Try smaller or larger eartips, especially Comply foam tips for a more secure fit; ensure the flexible cable segments are molded over your ears.

Specifications

ModelATH-E70
BrandAudio-Technica
Ear PlacementIn Ear
Audio Driver TypeThree Balanced Armature Drivers
Frequency Response20 Hz - 19,000 Hz
Impedance39 Ohms
Sensitivity109 dB
Noise ControlSound Isolation
Connectivity TechnologyWired
Headphone Jack6.35 mm Jack (with adapter)
Cable FeaturesDetachable
Item Weight0.01 Kilograms
ColorBlack

Warranty and Support

Warranty Information

The Audio-Technica ATH-E70 Professional In-Ear Monitor Headphones come with a 2-year warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Customer Support

For further assistance, technical support, or warranty inquiries, please contact Audio-Technica customer service through their official website or the contact information provided with your product packaging.

Product Overview Video

Video: An official overview of the Audio-Technica ATH-E70 Professional In-Ear Monitor Headphones, highlighting key features and design.

© 2023 Audio-Technica. All rights reserved.

Related Documents - ATH-E70

Preview Audio-Technica ATH-M Series Professional Monitor Headphones: Instructions and Care
Comprehensive instructions for Audio-Technica ATH-M50x, ATH-M40x, ATH-M30x, and ATH-M20x professional monitor headphones, covering safety, usage, cleaning, parts, and accessories.
Preview Audio-Technica Professional Monitor Headphones ATH-M50x/M40x/M30x/M20x: Operating Instructions
Operating instructions and safety precautions for Audio-Technica ATH-M50x, ATH-M40x, ATH-M30x, and ATH-M20x professional monitor headphones. Includes guidance on usage, care, connection, and accessory compatibility.
Preview Audio-Technica ATH-C200iS In-Ear Headphones User Manual
User manual for the Audio-Technica ATH-C200iS in-ear headphones, covering safety precautions, usage notes, care instructions, technical specifications, parts identification, and remote control functions.
Preview Audio-Technica ATH-M50xBT2 Wireless Headphones User Manual
Comprehensive user manual for the Audio-Technica ATH-M50xBT2 wireless headphones, detailing safety precautions, setup, operation, Bluetooth connectivity, troubleshooting, and technical specifications.
Preview Audio-Technica AT-ER500 Earpieces User Manual
User manual for the Audio-Technica AT-ER500 earpieces, detailing features, usage precautions, compatible models, care instructions, installation, and technical specifications.
Preview Audio-Technica ATH-R70xa Professional Open-Back Reference Headphones User Manual
User manual for the Audio-Technica ATH-R70xa professional open-back reference headphones, covering safety precautions, usage guidelines, and care instructions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.