Mattel Ghostbusters Electronic Proton Pack DRW72 Instruction Manual

1. Introduction

This instruction manual provides essential information for the safe and proper use of your Mattel Ghostbusters Electronic Proton Pack. This authentic ghost-hunting gear is designed to replicate the equipment from the Ghostbusters movie, featuring an electronic proton backpack and blaster with interactive functions.

2. Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

• Recommended for ages 4-8 years.
• Adult supervision is recommended during play.
• Do not aim the blaster at eyes or face.
• Keep away from open flames or heat sources.

3. What's in the Box

Your Mattel Ghostbusters Electronic Proton Pack package includes:

• 1 x Electronic Proton Pack
• 1 x Electronic Blaster (Proton Blaster)
• 1 x Glow-in-the-Dark Mini Figure (e.g., Slimer)

4. Setup

4.1 Battery Installation

1. Locate the battery compartment on the Electronic Proton Pack.
2. Using a Phillips head screwdriver (not included), open the battery compartment cover.
3. Insert 3 x AA (LR6) alkaline batteries (not included) into the compartment, ensuring correct polarity (+/-).
4. Replace the battery compartment cover and secure it with the screw.

4.2 Wearing the Proton Pack

• Adjust the shoulder straps on the Proton Pack to comfortably fit the user. The straps are designed to be adjustable for various sizes.
• Place the Proton Pack on your back like a backpack.

4.3 Connecting the Blaster

• The Blaster is connected to the Proton Pack via a flexible hose. Ensure the hose is securely attached to both the pack and the blaster.
• The blaster can be holstered on the side of the Proton Pack when not in use.

5. Operating Instructions

5.1 Powering On

• Locate the power switch on the Proton Pack (usually a prominent button or switch).
• Turn the power switch to the 'ON' position. The pack may emit sounds and lights to indicate it is active.

5.2 Using the Blaster and Ghost Projection

1. Open the compartment on the Blaster.
2. Insert the included glow-in-the-dark mini figure into the Blaster's compartment.
3. Close the compartment securely.
4. Point the Blaster at a flat surface, such as a wall or ceiling, in a dimly lit or dark room.
5. Press the trigger or activation button on the Blaster to project the mini figure's silhouette onto the surface. The Blaster will also activate lights and sounds.
6. Experiment with different distances to adjust the size and clarity of the projected ghost silhouette.

The Blaster is compatible with other Ghostbusters mini glow-in-the-dark ghost figures (sold separately), allowing for projection of various specters.

6. Maintenance

6.1 Cleaning

• Wipe the Proton Pack and Blaster with a clean, damp cloth. Do not immerse in water.
• Avoid using harsh chemicals or abrasive cleaners.

6.2 Battery Care

• Remove batteries if the product will not be used for an extended period to prevent leakage.
• Dispose of used batteries responsibly according to local regulations.

7. Troubleshooting

7.1 No Sound or Lights

• Ensure batteries are correctly installed with proper polarity.
• Replace old or depleted batteries with new alkaline batteries.
• Verify the power switch is in the 'ON' position.

7.2 Unclear or Faint Ghost Projection

• Ensure the room is sufficiently dark for optimal projection.
• Check that the mini figure is correctly inserted into the Blaster's compartment.
• Verify that the Blaster's lens is clean and free of obstructions.

8. Specifications

9. Warranty and Support

This product is covered by Mattel's standard manufacturer's warranty. For detailed warranty information, product support, or to inquire about replacement parts, please visit the official Mattel website or contact their customer service department. Please retain your proof of purchase for warranty claims.