The Diversey End Bac II Spray Disinfectant is a quaternary-based aerosol germicide designed for disinfecting pre-cleaned hard, non-porous surfaces. It is effective as a fungicidal, tuberculocidal, and pseudomonacidal agent. This product helps to eliminate odors and prevent the growth of mold and mildew. It features a fresh scent and comes in a 15-ounce aerosol can.
Image: Front view of the Diversey End Bac II Spray Disinfectant aerosol can, showing the brand logo and product name.
Important Safety Information
Read all instructions and warnings on the product label before use. This product contains active ingredients that require careful handling.
Warnings
KEEP OUT OF REACH OF CHILDREN.
WARNING: Causes moderate eye irritation. Avoid contact with eyes, skin, or clothing.
Harmful if swallowed.
Contents under pressure. Do not use or store near heat or open flame. Do not puncture or incinerate container. Exposure to temperatures above 130°F (54°C) may cause bursting.
First Aid
If in eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice.
If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice.
If swallowed: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious person.
For emergency medical information, call 1-800-558-2332.
Image: Back of the product can, detailing safety warnings, first aid, and storage information.
Setup and Preparation
Before First Use
Shake Well Before Using: Ensure the can is thoroughly shaken to mix contents for optimal performance.
Clean Surfaces: Prior to application, thoroughly clean all surfaces to be treated to remove gross filth or heavy soil. This ensures the disinfectant can work effectively.
Operating Instructions
Follow these directions for effective disinfection and control of mold, mildew, and fungus.
General Disinfection
Hold the can upright and spray from a distance of 6 to 8 inches until the area for treatment is thoroughly moistened.
Allow the surface to remain wet for 10 minutes.
Air dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary.
Control of Mold and Mildew
Spray the surface until thoroughly moistened.
Air dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary.
Repeat application in 7 days for continued control.
Control of Fungus
Spray the surface until thoroughly moistened.
Allow surfaces to remain wet for 10 minutes.
Air dry, wipe surfaces to dry and remove any residue, or rinse with potable water as necessary.
Image: Side of the product can, displaying specific directions for use.
Image: Product can shown in a gym setting with a basketball, highlighting its application in athletic environments.
Image: Commercial shower stalls, indicating areas where the disinfectant can be used for sanitation.
Storage and Disposal
Storage
Store in a cool, dry place away from heat or open flame.
Do not contaminate water, food, or feed by storage or disposal.
Disposal
Pesticide Disposal: Wastes resulting from the use of this product must be disposed of on site or at an approved waste disposal facility.
Container Disposal: Do not puncture or incinerate! If empty: Place in trash or offer for recycling if available. If partially filled: Call your local solid waste agency for disposal instructions.
For further assistance or information regarding the Diversey End Bac II Spray Disinfectant, please contact the manufacturer.
Manufacturer: Diversey
Emergency Medical Information: 1-800-558-2332
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.