Introduction
Thank you for purchasing the Commercial Electric 24 in. LED White Direct Wire Under Cabinet Light. This fixture is designed to provide brilliant, energy-efficient illumination for kitchen countertops and other work surfaces. Featuring a slim 1-inch low profile, a durable aluminum housing, and a 3000K LED color temperature, this light offers long-lasting, maintenance-free operation. This manual provides essential information for safe installation, operation, and maintenance of your new under cabinet light.
Safety Information
WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these safety precautions:
- Read all instructions before beginning installation.
- Turn off power at the circuit breaker or fuse box before wiring.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring.
- Do not install near any heat sources.
- Do not modify the fixture. Any modifications may void the warranty and create a safety hazard.
- This fixture is for indoor use only. Do not expose to water or moisture.
Package Contents
Verify that all parts listed below are included in your package:
- 1 x Commercial Electric 24 in. LED Under Cabinet Light Fixture
- Mounting Hardware (screws)
- Instruction Manual
Specifications
| Feature | Specification |
|---|---|
| Model Number | 1001217457 (57004-WH) |
| Light Output (Lumens) | 850 lumens |
| Wattage | 17 Watts |
| Efficacy | 50 lm/Watt |
| Color Rendering Index (CRI) | 80 |
| Color Temperature (CCT) | 3000K (Bright White) |
| Voltage | 120 Volts |
| Dimensions (L x W x H) | 24 in. x 3.03 in. x 1.02 in. |
| Material | Aluminum |
| Switch Type | Rocker Switch |
| Mounting Type | Under Cabinet, Surface |
| Energy Star Rated | Yes |
Figure 1: Lighting Facts label detailing light output, wattage, efficacy, CRI, and color temperature.
Setup and Installation
This fixture is designed for direct wire installation. Ensure power is OFF at the circuit breaker before proceeding.
- Prepare the Installation Area: Choose a suitable location under a cabinet or on a surface. Ensure there is adequate space for the fixture and access for wiring.
- Mount the Fixture: Use the provided captive mounting screws to secure the fixture to the desired surface. The fixture features a slim profile for discreet installation.
- Wire the Fixture: This is a 120-Volt direct wire fixture. Connect the household electrical wires to the fixture's wires according to local electrical codes. Typically, this involves connecting the black (hot) wire to the black fixture wire, the white (neutral) wire to the white fixture wire, and the ground wire to the green or bare copper fixture wire. Ensure all connections are secure with appropriate wire connectors.
- Secure Wiring: Carefully tuck all wires into the fixture's wiring compartment or junction box.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Figure 2: The 24-inch LED under cabinet light installed, providing illumination to a kitchen countertop.
Figure 3: Front view of the Commercial Electric 24-inch LED Under Cabinet Light fixture.
Operating Instructions
The Commercial Electric LED Under Cabinet Light is equipped with an on/off rocker switch for easy operation and is dimmable with compatible dimmers.
- On/Off Operation: Locate the rocker switch on the fixture. Press one side to turn the light ON, and the other side to turn the light OFF.
- Dimming Function: This fixture is dimmable. For optimal performance, use with compatible dimmers. Compatible dimmers include (but are not limited to):
- Lutron brand: DVWCL-153PH-WH/530826; CTCL-153PDH-WH/267858; TGCL-153PH-WH/527401; S-600PR-WH/396682; TG-600PR-WH/400017
- Leviton brand: R62-06683-0IW/534006; R12-06672-1LW/1000024040
Figure 4: Close-up view of the integrated rocker switch for turning the light on and off.
Maintenance
The LED light source in this fixture is designed for 50,000 hours of continuous use and does not require bulb replacement. Minimal maintenance is required.
- Cleaning: Ensure the power is OFF before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure rocker switch is in the 'ON' position. Verify all wiring connections are secure. |
| Light flickers or dims unexpectedly. | Incompatible dimmer switch or loose connection. | Ensure a compatible dimmer is used (refer to Operating Instructions). Check wiring connections for looseness. |
| Light is not as bright as expected. | Dimmer setting is too low. | Adjust the dimmer to a higher setting. |
Warranty and Support
For warranty information or technical support, please contact Commercial Electric customer service. Keep your purchase receipt as proof of purchase.
Figure 5: The product proudly displaying its Energy Star rating, indicating energy efficiency.