HORI Nintendo Switch Battle Pad (Zelda) GameCube Style Controller Instruction Manual

1. Introduction

Thank you for purchasing the HORI Nintendo Switch Battle Pad (Zelda) GameCube Style Controller. This wired USB controller is designed to provide a classic GameCube-style gaming experience on your Nintendo Switch console. It features a 10-foot cable for flexible placement and is officially licensed by Nintendo.

Image 1.1: Angled view of the HORI Nintendo Switch Battle Pad (Zelda) GameCube Style Controller, showcasing its ergonomic design and Zelda-themed emblem.

2. Package Contents

• HORI Nintendo Switch Battle Pad (Zelda) GameCube Style Controller
• Integrated 10 ft. USB Cable

Image 2.1: The HORI Nintendo Switch Battle Pad (Zelda) GameCube Style Controller shown in its retail packaging, featuring Nintendo Switch branding and Zelda artwork.

3. Controller Layout

Image 3.1: Front view of the controller, highlighting all buttons and sticks.

The controller features a classic GameCube layout with modern enhancements:

• Left Analog Stick: Primary movement control.
• D-Pad: Directional input.
• C-Stick (Right Analog Stick): Secondary movement or camera control.
• A, B, X, Y Buttons: Action buttons.
• START/PAUSE Button (+): Game menu/pause.
• SELECT Button (-): Game menu/select.
• HOME Button: Returns to Nintendo Switch HOME Menu.
• CAPTURE Button: Takes screenshots.
• L/R Buttons: Left and Right shoulder buttons.
• ZL/ZR Buttons: Left and Right trigger buttons.

Image 3.2: Side view illustrating the L, R, ZL, and ZR shoulder buttons.

4. Setup

4.1 Connecting to Nintendo Switch

1. Ensure your Nintendo Switch console is powered on and docked, or in tabletop mode with a USB-A to USB-C adapter (not included) if connecting directly to the console.
2. Locate an available USB port on the Nintendo Switch dock.
3. Plug the USB connector of the HORI Battle Pad controller into the USB port on the dock.
4. The controller will be automatically recognized by the Nintendo Switch. You can verify its connection in the 'Controllers' menu of the HOME screen.

No additional drivers or software are required for basic functionality on the Nintendo Switch.

5. Operating Instructions

5.1 Basic Control

Once connected, the controller functions as a standard Nintendo Switch Pro Controller, allowing you to navigate the HOME Menu and play compatible games. The GameCube-style layout is particularly suited for fighting games like Super Smash Bros. Ultimate.

5.2 Turbo Function

The controller features a Turbo function for rapid button presses. To activate:

1. Press and hold the TURBO button (located near the HOME button).
2. While holding TURBO, press the desired action button (A, B, X, Y, L, R, ZL, ZR, D-Pad directions). The button will now rapidly repeat its input when held down.
3. To adjust Turbo speed (if applicable, refer to specific product documentation for details on speed modes), repeat the process.
4. To deactivate Turbo for a specific button, press and hold TURBO again and press the button.

5.3 Shoulder Button Toggle

This controller allows you to swap the functions of the L/R and ZL/ZR shoulder buttons. This can be useful for customizing your control scheme based on game preference.

1. Refer to the specific product documentation or the small button located near the HOME button for instructions on how to toggle shoulder button functions. This typically involves holding a specific button combination.

6. Maintenance

6.1 Cleaning

• Disconnect the controller from the Nintendo Switch before cleaning.
• Use a soft, dry cloth to wipe the surface of the controller.
• For stubborn dirt, lightly dampen the cloth with water. Avoid using harsh chemicals or abrasive cleaners.
• Do not allow liquids to enter the controller's openings.

6.2 Storage

• Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid wrapping the cable too tightly around the controller to prevent damage.

7. Troubleshooting

• Controller not recognized by Nintendo Switch:
  • Ensure the USB cable is securely plugged into an active USB port on the Nintendo Switch dock.
  • Try a different USB port on the dock.
  • Restart your Nintendo Switch console.
  • Ensure your Nintendo Switch system software is up to date.
• Buttons or sticks are unresponsive:
  • Disconnect and reconnect the controller.
  • Test the controller in a different game or on the Nintendo Switch HOME Menu to determine if the issue is game-specific.
  • Inspect the cable for any visible damage.
• Turbo function not working:
  • Ensure you are correctly following the steps to activate the Turbo function (Section 5.2).
  • Some games may not fully support rapid fire inputs.

8. Specifications

• Model Number: NSW-108U
• Connectivity: Wired USB
• Cable Length: 10 ft. (approximately 3 meters)
• Dimensions: 3.94 x 3.94 x 1.18 inches (approximate)
• Weight: 3.53 ounces (approximate)
• Manufacturer: HORI
• Compatibility: Nintendo Switch
• Features: Anti-snapback analog sticks, fast-action L/R & ZL/ZR buttons, toggle shoulder button functions, Turbo settings.

9. Warranty and Support

For warranty information, technical support, or further assistance, please contact HORI customer service directly. Refer to the official HORI website or product packaging for the most current contact details and warranty terms applicable to your region.

Official HORI Website: https://stores.horiusa.com/