Product Overview
Experience uninterrupted water flow, even in freezing conditions, with Camco’s 25-Ft Heated Drinking Water Hose. This hose is designed for RVs, livestock, gardens, kennels, and other applications requiring freeze protection down to -20°F (-28°C). It features an energy-saving thermostat and includes an adapter for versatile connection.
Image: Camco 25-Ft Heated Drinking Water Hose coiled, highlighting its -20°F freeze protection capability.
Key Features:
- Premium Grade Drinking Water Hose: Constructed with NSF/ANSI 61 certified hose, lead, BPA, and phthalate-free.
- Provides Freeze Protection: Effective down to -20°F (-28°C) for continuous water supply.
- Energy-Saving Technology: Thermostat-controlled heating cable activates only as needed, operating on 120VAC with an 18AWG, 6-foot power cord and LED indicator plug.
- Patented Design Made in the USA: Manufactured with high-quality global materials for durability and performance.
- Certified Lead-Free: CSA lead-free content certified to NSF/ANSI 372, complying with federal and state lead-free laws.
- Strong & Reliable: Features a 5/8" ID, tough protective exterior jacket, and machined fittings for corrosion resistance.
Video: An overview of the Camco Heated Drinking Water Hose, demonstrating its features and benefits for cold weather use.
Setup and Installation
Proper installation is crucial for optimal performance and to prevent freezing. Follow these steps to set up your Camco Heated Water Hose:
- Uncoil the Hose: Before connecting, fully uncoil the hose and lay it straight to remove any kinks. This ensures proper water flow and heating element function.
- Identify Thermostat End: The thermostat is located at one end of the hose. For proper operation, this end must be positioned in the coldest location, typically near the water source.
- Connect to Water Source: Attach the appropriate end of the hose to your water spigot. The hose includes a male-to-male adapter for flexibility, allowing connection from either end based on the electrical outlet's location. Ensure connections are tight to prevent leaks.
- Secure Connections: Use the provided foam sleeves to insulate the connection points at both the water source and the RV inlet. This helps prevent freezing at these critical areas.
- Plug into Power: Connect the 6-foot power cord to a GFCI-protected 120VAC outlet. The LED indicator light on the plug will illuminate, confirming power is supplied and the heating element is active.
Image: Camco Heated Water Hose connected to an RV in a snowy environment, demonstrating its "Auto Temp Technology" for freeze protection.
Operating Instructions
The Camco Heated Water Hose is designed for automatic, worry-free operation:
- Automatic Heating: The integrated thermostat automatically activates the heating cable when the ambient temperature drops to 47°F (8°C) or below. It will stop heating when the temperature rises to 60°F (15°C) or above.
- LED Indicator: The LED light on the power plug indicates that the hose is receiving power and the heating element is ready to operate as needed.
- Continuous Water Flow: Once properly installed and powered, the hose will maintain water flow even in temperatures as low as -20°F (-28°C).
Video: Detailed explanation of the Camco Heated Drinking Water Hose's thermostat functionality and energy efficiency.
Maintenance
To ensure the longevity and performance of your heated water hose, consider the following maintenance tips:
- Regular Inspection: Periodically check the hose for any signs of wear, cuts, or damage to the exterior jacket or electrical components.
- Clean Connections: Keep the hose fittings and adapter clean and free of debris.
- Proper Storage: When not in use, especially during warmer months, disconnect the hose, drain all water, and coil it loosely. Store it in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Kinking: While the hose is designed to be kink-resistant, avoid sharp bends or excessive pulling that could damage the internal heating element.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow / Water frozen |
|
|
| Water leaking at connections |
|
|
| LED indicator not lit |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Camco |
| Model Number | 22911 |
| Length | 25 Feet |
| Freeze Protection | Down to -20°F (-28°C) |
| Material | Blend, Plastic (NSF/ANSI 61 certified) |
| Color | Blue |
| Item Weight | 8.3 Pounds |
| Maximum Pressure | 100 PSI |
| Outside Diameter | 1 Inch |
| Nominal Wall Thickness | 0.08 Inches |
| Power Source | 120VAC (18AWG, 6' power cord) |
| Certifications | NSF/ANSI 61, CSA Lead-Free to NSF/ANSI 372 |
| Included Components | (1) 25' Heated Hose, (1) Male-to-Male Adapter |
Warranty and Support
The Camco 25-Ft Heated RV Water Hose comes with a Limited 1 Year Warranty. For warranty claims, technical support, or additional product information, please contact Camco customer service directly. Refer to the product packaging or the official Camco website for the most up-to-date contact details.
