Introduction
The SANYO DVD Recorder/VCR Combo (Model RFWZV475F) is designed to enhance your home entertainment experience by offering versatile playback and recording capabilities. This unit supports both DVD and VHS formats, allowing for 2-way recording between DVD and VCR. It features Dolby Digital stream out, progressive scan video out, parental lock, and a variety of input and output options for seamless integration with your existing setup.
Package Contents
- SANYO DVD Recorder/VCR Combo Unit
- Remote Control (requires 2 AAA batteries)
- AV Cable
- Owner's Manual (this document)
Setup Guide
Follow these steps to properly set up your SANYO DVD Recorder/VCR Combo:
- Placement: Place the unit on a stable, flat surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight.
- Power Connection: Connect the power cord to the AC IN jack on the rear of the unit, then plug it into a standard electrical outlet.
- Video and Audio Connections:
- HDMI Connection (Recommended for best quality): Connect an HDMI cable from the HDMI OUT port on the rear of the unit to an HDMI IN port on your television.
- Composite Video Connection: Use the provided AV cable to connect the yellow video output jack on the unit to the yellow video input jack on your TV. Connect the red and white audio output jacks on the unit to the corresponding red and white audio input jacks on your TV.
- S-Video Connection: For improved video quality over composite, connect an S-Video cable from the S-VIDEO OUT port on the unit to an S-Video IN port on your TV. You will still need to connect the red and white audio cables for sound.
- Coaxial Connection: Connect a coaxial cable from the RF OUT jack on the unit to the antenna/cable input on your TV.
- Antenna/Cable Connection (for recording TV broadcasts): If you intend to record from a cable or satellite box, connect the output from your cable/satellite box to the LINE-IN (Video/Audio) ports on the rear of the SANYO unit.
- Remote Control Batteries: Insert 2 AAA batteries into the remote control, ensuring correct polarity.
- Initial Power On: Press the POWER button on the unit or remote control to turn on the device. Follow any on-screen prompts for initial setup.
Operating Instructions
Playing DVDs and VHS Tapes
- Power On: Press the POWER button to turn on the unit.
- Select Source: Use the "DVD" or "VCR" button on the front panel or remote to select the desired playback mode.
- Insert Media:
- For DVD: Press the OPEN/CLOSE button to open the DVD tray. Place a DVD disc onto the tray with the label side facing up. Press OPEN/CLOSE again to close the tray.
- For VHS: Insert a VHS tape into the VCR slot. The unit will automatically load the tape.
- Playback: Press the PLAY button to begin playback. Use the STOP, PAUSE, REW, and FFWD buttons for control.
2-Way Dubbing (DVD to VCR / VCR to DVD)
This unit supports dubbing content between DVD and VHS formats. Ensure you are using a recordable DVD (DVD-R/RW) for DVD recording.
- Insert Source Media: Insert the DVD you wish to copy into the DVD tray, or the VHS tape you wish to copy into the VCR slot.
- Insert Target Media: Insert a blank recordable DVD into the DVD tray (if dubbing from VCR) or a blank VHS tape into the VCR slot (if dubbing from DVD).
- Select Source: Press the "VCR Source DVD" button to select whether the VCR or DVD is the source for dubbing. The corresponding indicator light will illuminate.
- Start Dubbing: Press the "D.DUBBING" button. The unit will begin copying content from the source to the target media. Monitor the progress on your TV screen.
- Stop Dubbing: Press the STOP button when dubbing is complete.
Recording from External Sources (Cable/Satellite Box)
You can record content from an external source connected to the LINE-IN ports.
- Connect External Source: Ensure your cable or satellite box is connected to the LINE-IN (Video/Audio) ports on the rear of the SANYO unit.
- Insert Recordable Media: Insert a blank recordable DVD or VHS tape into the unit.
- Select Recording Target: Use the "DVD" or "VCR" button to select where you want to record (DVD or VCR).
- Select Input Source: On your SANYO unit, select the appropriate input source (e.g., Line 1, Line 2) corresponding to where your external device is connected. Refer to your TV's input selection for this.
- Start Playback on External Source: Begin playing the content you wish to record from your cable/satellite box.
- Start Recording: Press the REC button on the SANYO unit or remote control. The recording indicator will light up.
- Stop Recording: Press the STOP button when recording is complete.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your unit.
- Cleaning the Exterior: Use a soft, dry cloth to wipe the exterior of the unit. For stubborn stains, slightly dampen the cloth with water and a mild detergent, then wipe dry. Avoid abrasive cleaners or solvents.
- Cleaning the Disc Tray/VCR Slot: Periodically clean the disc tray and VCR slot using a soft, lint-free cloth. Do not use liquids directly on these areas. For VCR heads, consider using a specialized VHS head cleaner tape.
- Ventilation: Ensure that the ventilation openings on the unit are not blocked. Blocked vents can lead to overheating and damage.
- Disc/Tape Care: Handle DVDs and VHS tapes by their edges to avoid fingerprints and scratches. Store them in their cases away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter issues with your SANYO DVD Recorder/VCR Combo, try the following solutions:
| Problem | Possible Solution |
|---|---|
| No power |
|
| No picture or sound |
|
| Disc/Tape won't play or eject |
|
| Recording issues |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | RFWZV475F |
| Product Dimensions | 22 x 10 x 15 inches |
| Item Weight | 1 pounds (16 ounces) |
| Media Type Supported | DVD, CD, CD-R/RW, VHS |
| Special Features | Progressive Scan, 2-way Recording (DVD to VCR, VCR to DVD), 5-speed recording (up to 6 hours) |
| Audio Output Mode | Dolby Digital |
| Video Resolution | 1920x1080 (HDMI output) |
| Connectivity Technology | HDMI, S-Video, Composite Video/Audio, Coaxial |
| Color | Black |
| Batteries Required | 2 AAA batteries (for remote) |
Warranty and Support
For warranty information, please refer to the warranty card included with your product or contact SANYO customer support. The owner's manual provides detailed information regarding specific warranty terms and conditions.
For technical assistance, troubleshooting beyond this guide, or service inquiries, please visit the official SANYO support website or contact their customer service hotline. Contact details are typically found in the owner's manual or on the manufacturer's website.
