Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Puig 2133A Windshield Naked Model Blue. Designed for the CB600F HORNET 03'-04' and similar naked motorcycles, this windshield is manufactured from durable polycarbonate, offering improved aerodynamics and a distinctive aesthetic.
Image 1: The Puig 2133A Windshield Naked Model in blue, showcasing its design and polycarbonate finish.
Package Contents
Before beginning installation, please verify that all components are present in the package:
- 1 x Puig 2133A Windshield Naked Model (Blue)
- Mounting Hardware Kit (specific to motorcycle model, if applicable)
- Installation Instructions (this manual)
Note: The mounting hardware kit may vary depending on the specific motorcycle model for which the windshield is intended.
Setup and Installation
The Puig 2133A Windshield is designed for easy assembly. Follow these steps carefully for proper installation:
- Preparation: Ensure your motorcycle is stable on a stand. Gather all tools required for installation (e.g., wrenches, screwdrivers).
- Identify Mounting Points: Locate the designated mounting points on your motorcycle's handlebars or headlight assembly. These points are typically designed to accommodate universal or specific windshield brackets.
- Attach Brackets: Secure the provided mounting brackets to the motorcycle's frame or handlebar clamps. Ensure all bolts are finger-tight at this stage.
- Position Windshield: Carefully align the windshield with the mounting brackets. The windshield has pre-drilled holes that will match the bracket's attachment points.
- Secure Windshield: Attach the windshield to the brackets using the supplied screws and washers. Do not overtighten.
- Adjust and Tighten: Once the windshield is loosely mounted, adjust its position to ensure proper alignment and clearance from other motorcycle components. Once satisfied with the positioning, progressively tighten all bolts and screws, ensuring a secure fit without excessive force.
Image 2: A Puig windshield installed on a motorcycle, demonstrating typical mounting position near the headlight.
For specific motorcycle models, a special installation kit may be provided with detailed instructions. Always refer to those specific instructions if included.
Operating Considerations
The Puig 2133A Windshield is designed to enhance your riding experience by improving aerodynamics and providing wind deflection. While there are no "operating" controls for the windshield itself, consider the following:
- Aerodynamic Benefits: The windshield is designed to reduce wind pressure on the rider, especially at higher speeds, contributing to a more comfortable ride.
- Visibility: Ensure the windshield does not obstruct your line of sight. The blue tint is designed to be transparent enough for safe operation.
- Secure Fit: Periodically check that all mounting hardware remains tight and secure, especially after initial installation and before long rides. Loose hardware can lead to vibration or detachment.
Maintenance
Proper maintenance will prolong the life and clarity of your Puig windshield:
- Cleaning: Clean the polycarbonate surface with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Drying: Dry the windshield with a clean, soft microfiber cloth to prevent water spots and streaks.
- Inspection: Regularly inspect the windshield for any cracks, scratches, or signs of wear. Check the mounting hardware for corrosion or looseness.
- Storage: If removing the windshield for storage, keep it in a clean, dry place away from direct sunlight and extreme temperatures to prevent warping or discoloration.
Troubleshooting
This section addresses common issues you might encounter with your windshield.
| Problem | Possible Cause | Solution |
|---|---|---|
| Windshield vibrates excessively | Loose mounting hardware. | Check and tighten all mounting bolts and screws. Ensure proper alignment. |
| Reduced visibility due to scratches/haze | Improper cleaning methods or prolonged exposure to harsh elements. | Clean with mild soap and water. If damage is severe, consider replacement. |
| Windshield does not fit correctly | Incorrect model for motorcycle or improper installation. | Verify the windshield model (2133A) is compatible with your motorcycle. Re-read installation steps carefully. |
Specifications
Detailed specifications for the Puig 2133A Windshield Naked Model Blue:
- Model: 2133A
- Brand: Puig
- Color: Blue
- Exterior Finish: Polycarbonate
- Style: Retro
- Auto Part Position: Center
- Number of Pieces: 1
- Manufacturer: Motoplastic S.A.
- Item Weight: 1.1 pounds (approx. 0.5 kg)
- Package Dimensions: 20.04 x 14.29 x 6.54 inches (approx. 50.9 x 36.3 x 16.6 cm)
- Date First Available: January 25, 2016
Warranty and Support
Puig products are manufactured to high-quality standards. For specific warranty information regarding your Puig 2133A Windshield, please refer to the warranty card included with your purchase or visit the official Puig website. In case of technical issues or questions not covered in this manual, please contact Puig customer support through their official channels.
Official Website: www.puig.tv
