Aduro Amplify LED Wireless Speaker

1. Introduction

The Aduro Amplify LED Wireless Speaker, model BSP15, is a portable audio device designed for wireless music playback and hands-free calling. It features integrated LED lighting with multiple settings to enhance the audio experience. This manual provides instructions for the proper setup, operation, and maintenance of your speaker.

What's in the Box:

• Aduro Amplify LED Wireless Speaker (BSP15)
• Charging Cable

2. Safety Information

• Do not expose the speaker to water or moisture. This product is not water-resistant.
• Avoid extreme temperatures. Do not place near heat sources or in direct sunlight for extended periods.
• Do not attempt to disassemble or modify the speaker. This may void the warranty and cause damage.
• Use only the provided charging cable or a certified equivalent.
• Keep out of reach of children.

3. Product Features

• Wireless Connectivity: Connects to smartphones, tablets, and other Bluetooth-enabled devices.
• Easy-Touch Pairing: Simplifies the process of connecting to your device.
• Integrated Microphone: Allows for hands-free phone calls.
• High-Quality Sound Output: Delivers clear and loud audio.
• Multiple LED Settings: Offers various light modes to complement your audio experience.

4. Controls Overview

The Aduro Amplify speaker features intuitive controls located on the top panel for easy access to functions.

Image: Top view of the Aduro Amplify speaker, highlighting the control panel. From top to bottom, buttons include: M/▶█ (Mode/Play/Pause), +/▶▶ (Volume Up/Next Track), LED (LED Mode Control), ◀◀/- (Volume Down/Previous Track).

• M/▶█ Button: Press to switch between modes (e.g., Bluetooth, AUX). Press and hold to power on/off. Short press to Play/Pause music.
• +/▶▶ Button: Short press to increase volume. Press and hold to skip to the next track.
• LED Button: Press to cycle through different LED light modes.
• ◀◀/- Button: Short press to decrease volume. Press and hold to go to the previous track.

5. Setup Instructions

5.1 Charging the Speaker

Before first use, fully charge the speaker. Connect the provided charging cable to the speaker's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The LED indicator will show charging status and turn off or change color when fully charged.

5.2 Powering On/Off

• To Power On: Press and hold the M/▶█ button for approximately 3 seconds until you hear an audible prompt or see the LED indicator light up.
• To Power Off: Press and hold the M/▶█ button for approximately 3 seconds until you hear an audible prompt or the LED indicator turns off.

5.3 Bluetooth Pairing

To connect your speaker to a Bluetooth-enabled device:

1. Ensure the speaker is powered on and in Bluetooth pairing mode. The LED indicator will typically flash rapidly, indicating it is ready to pair.
2. On your smartphone, tablet, or other device, navigate to the Bluetooth settings.
3. Enable Bluetooth and search for available devices.
4. Select "Aduro BSP15" (or similar name) from the list of found devices.
5. Once paired, the speaker will emit an audible confirmation, and the LED indicator will typically stop flashing and remain solid.
6. The speaker will automatically attempt to reconnect to the last paired device when powered on.

5.4 Wired Connection (AUX)

For devices without Bluetooth, you can use a 3.5mm audio cable (not included) to connect to the speaker's AUX input port. Once connected, the speaker should automatically switch to AUX mode. If not, press the M/▶█ button to cycle to AUX mode.

6. Operating Instructions

6.1 Playing Audio

• Play/Pause: Short press the M/▶█ button.
• Volume Up: Short press the +/▶▶ button.
• Volume Down: Short press the ◀◀/- button.
• Next Track: Press and hold the +/▶▶ button.
• Previous Track: Press and hold the ◀◀/- button.

6.2 Hands-Free Calls

When connected via Bluetooth, the speaker's built-in microphone allows for hands-free calling.

• Answer Call: Short press the M/▶█ button when an incoming call rings.
• End Call: Short press the M/▶█ button during a call.
• Reject Call: Press and hold the M/▶█ button when an incoming call rings.

6.3 LED Light Settings

Press the LED button to cycle through the available light modes. The speaker offers various visual effects, including pulsating lights that react to music.

7. Maintenance

7.1 Cleaning

Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or other chemical solvents, as these may damage the surface.

7.2 Storage

When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to charge the battery periodically to maintain its lifespan.

8. Troubleshooting

• Speaker will not power on:
  Ensure the battery is charged. Connect the charging cable and try again after a few minutes.
• Cannot pair with Bluetooth device:
  Ensure the speaker is in pairing mode (LED flashing). Make sure Bluetooth is enabled on your device and it is within range (typically 10 meters/30 feet). Turn both devices off and on again, then try pairing. Ensure no other devices are currently connected to the speaker.
• No sound or low volume:
  Check the volume levels on both the speaker and your connected device. Ensure the speaker is correctly paired or the AUX cable is fully inserted. If using AUX, ensure the correct mode is selected.
• LED lights not working:
  Press the LED button to cycle through modes. If still unresponsive, power cycle the speaker.

9. Specifications

Image: Side view of the Aduro Amplify LED Wireless Speaker, showing its cylindrical design and speaker grille.

10. Warranty and Support

10.1 Limited Warranty

This Aduro product is covered by a limited warranty against defects in materials and workmanship under normal use. The duration and terms of the warranty may vary. Please refer to the warranty card included with your purchase or contact Aduro customer support for specific details.

10.2 Customer Support

For technical assistance, warranty claims, or product inquiries, please contact Aduro customer support. Contact information can typically be found on the manufacturer's official website or on the product packaging.

Manufacturer: Aduro