1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Quoizel TY1444WT Taylor 4-Light Track Lighting Kit. Please read these instructions thoroughly before beginning installation and retain them for future reference.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK.
- Always turn off the electrical supply at the main fuse or circuit breaker box before beginning installation or performing any maintenance.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections are made in accordance with local codes and ordinances.
- Do not install this fixture in wet locations. It is approved for DAMP locations only.
- Use only the specified bulb type and wattage to avoid overheating.
3. Package Contents
Verify that all components are present before discarding packaging materials.
- 1 x Quoizel TY1444WT Taylor 4-Light Track Lighting Fixture
- Mounting Hardware (for existing junction box)
- Opal Etched Glass Shades (4 units)
Note: Light bulbs are not included and must be purchased separately.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | TY1444WT |
| Dimensions (L x W x H) | 43.75" x 4.75" x 10.75" |
| Weight | 7 lbs |
| Number of Lights | 4 |
| Max Wattage per Bulb | 100 Watts |
| Total Wattage | 400 Watts |
| Bulb Base | E26 (Medium Base) |
| Bulb Type Compatibility | Incandescent, CFL, Halogen, LED |
| Voltage | 120 Volts |
| Finish | Western Bronze |
| Shade Material | Opal Etched Glass |
| Location Rating | UL Approved for DAMP Locations |
| Control Method | Remote (requires compatible dimmer switch and dimmable bulbs) |
5. Installation Instructions
Follow these steps carefully to install your track lighting kit. If you are not familiar with electrical wiring, consult a qualified electrician.
- Prepare for Installation:
- Turn off the power at the circuit breaker or fuse box to the outlet box where the fixture will be installed.
- Ensure the power is off by testing the circuit with a voltage tester.
- Carefully unpack the fixture and all parts. Place all parts on a clean, flat surface.
- Mount the Fixture:
- Attach the mounting bracket (if separate) to the existing junction box in the ceiling using the provided screws. Ensure it is securely fastened.
- The fixture is designed to mount to an existing junction box.
- Make Electrical Connections:
- Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box (usually bare copper or green) using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Ensure all wire nuts are tightly secured and no bare wire is exposed.
- Secure the Fixture:
- Carefully tuck all wires into the junction box.
- Align the fixture base with the mounting bracket and secure it with the provided screws.
- Install Light Bulbs and Shades:
- Screw the appropriate E26 base bulbs (up to 100W incandescent or equivalent LED/CFL) into each socket. Do not overtighten.
- Attach the opal etched glass shades to each light head according to the fixture design. Ensure they are securely in place.
- Restore Power:
- Turn the power back on at the circuit breaker or fuse box.
- Test the fixture to ensure it is working correctly.
Figure 1: Front view of the Quoizel TY1444WT Taylor Track Lighting Kit with four adjustable light heads and opal etched glass shades.
Figure 2: Angled view of the track lighting kit, showing the Western Bronze finish and the ceiling canopy.
6. Operating Instructions
Once installed, your Quoizel TY1444WT Taylor Track Lighting Kit is ready for use.
- Power On/Off: Operate the fixture using the standard wall switch connected to the circuit.
- Bulb Type: This fixture uses E26 medium base bulbs, up to 100 watts each. Compatible bulb types include incandescent, CFL, halogen, or LED.
- Dimming Functionality: For full-range dimming, ensure you use dimmable bulbs and a compatible dimmer switch (sold separately) installed on the circuit.
- Adjusting Light Heads: The individual light heads can be adjusted to direct light as needed. Gently pivot or rotate the heads to achieve the desired illumination angle.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lighting fixture.
- Cleaning: To clean the fixture, ensure the power is off and the fixture is cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
- Bulb Replacement:
- Turn off the power at the circuit breaker before replacing bulbs.
- Allow bulbs to cool completely before touching them.
- Carefully unscrew the old bulb and replace it with a new E26 medium base bulb of the specified wattage (max 100W).
- Ensure the new bulb is securely screwed in but not overtightened.
- Glass Shade Care: Handle glass shades with care. If a shade becomes loose, gently re-secure it.
Figure 3: Close-up view of an individual light head, highlighting the opal etched glass shade and its attachment point.
8. Troubleshooting
If you encounter issues with your lighting kit, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wire connection Defective bulb | Check circuit breaker/fuse Ensure all wire connections are secure (power off first) Replace bulb with a known working one |
| Light flickers | Loose bulb Incompatible dimmer switch/bulb Loose wire connection | Tighten bulb Ensure dimmer and bulbs are compatible (if using dimming) Check wire connections (power off first) |
| Bulbs burn out quickly | Incorrect wattage bulb Poor quality bulbs Voltage fluctuations | Use bulbs within the specified wattage range (max 100W) Try a different brand of bulb Consult an electrician if voltage issues are suspected |
9. Warranty Information
This Quoizel lighting fixture is covered by a manufacturer's warranty. Please refer to the original purchase documentation or contact Quoizel customer support for specific warranty terms and conditions.
10. Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact Quoizel customer service through their official website or the retailer where the product was purchased.
