Introduction
This manual provides detailed instructions for the operation and maintenance of your Armitron Sport Men's Digital Chronograph Watch, model 40/8284. This timepiece features a digital display, chronograph (stopwatch), daily alarm, dual time zone function, and an electroluminescent (EL) backlight. Please read these instructions carefully to ensure proper use and to maximize the lifespan of your watch.
Watch Components and Button Functions
Image: Front view of the Armitron Sport Digital Chronograph Watch 40/8284, showcasing its red resin case, black and red top rings, and digital display. The four control buttons are visible on the sides.
Your Armitron Sport watch features four primary control buttons:
- MODE (Bottom Left): Cycles through different operational modes (Time, Chronograph, Alarm, Dual Time).
- RESET (Top Left): Used to reset the chronograph, adjust settings in various modes, or select options.
- ST/STP (Top Right): Used to start/stop the chronograph, or to increment values when setting time/date/alarm.
- EL (Bottom Right): Activates the Electroluminescent backlight for illumination of the display.
Initial Setup: Setting Time and Date
Upon first use or after a battery change, you may need to set the current time and date. Follow these steps:
- From the normal Time Mode display, press the MODE button repeatedly until the seconds begin to flash. This indicates you are in time setting mode.
- Press the RESET button to cycle through the settings: Seconds → Hour → Minute → Year → Month → Day. The currently adjustable value will flash.
- Use the ST/STP button to increment the flashing value. Hold the ST/STP button to advance values more quickly.
- Once all values (seconds, hour, minute, year, month, day) are set correctly, press the MODE button to exit the setting mode and return to the normal Time Mode display.
Note: The watch supports both 12-hour and 24-hour time formats. While setting the hour, pressing ST/STP will toggle between AM/PM (for 12-hour format) and 'H' (for 24-hour format).
Operating Instructions
1. Time Mode
This is the default display mode, showing the current time (hours, minutes, seconds), day of the week, and date (month, day).
2. Chronograph (Stopwatch) Mode
The chronograph measures elapsed time.
- From Time Mode, press the MODE button once to enter Chronograph Mode. The display will show '0:00:00'.
- Press ST/STP to start the chronograph.
- Press ST/STP again to stop the chronograph.
- Press RESET to clear the chronograph to '0:00:00'.
- To return to Time Mode, press the MODE button.
3. Alarm Mode
The watch features a daily alarm function.
- From Time Mode, press the MODE button twice to enter Alarm Mode. The alarm time will be displayed.
- Press RESET to select the hour or minute to set. The selected value will flash.
- Use ST/STP to adjust the flashing hour or minute.
- To activate or deactivate the alarm, press ST/STP while in Alarm Mode (without any value flashing). An alarm icon will appear/disappear on the display.
- To return to Time Mode, press the MODE button.
4. Dual Time Mode
This function allows you to set and display a second time zone.
- From Time Mode, press the MODE button three times to enter Dual Time Mode.
- Press RESET to select the hour or minute to set. The selected value will flash.
- Use ST/STP to adjust the flashing hour or minute.
- To return to Time Mode, press the MODE button.
5. Backlight (EL)
To illuminate the display in low-light conditions, press the EL button (bottom right). The backlight will remain active for a few seconds.
Water Resistance Information
Your Armitron Sport watch is water resistant to 330 feet (100 meters). This rating indicates suitability for swimming and snorkeling, but it is not suitable for scuba diving. To maintain water resistance, do not press any buttons while the watch is submerged in water.
Image: A chart illustrating different levels of watch water resistance. The 330ft (100m) rating for this watch is suitable for swimming and snorkeling.
Important: Water resistance is not a permanent condition. Gaskets and seals can deteriorate over time, reducing the watch's resistance to water. Avoid exposing the watch to extreme temperature changes, as this can affect the integrity of the seals.
Maintenance
Cleaning
Regularly clean your watch with a soft, damp cloth. For resin straps, mild soap and water can be used. Avoid harsh chemicals or abrasive materials, as these can damage the watch's finish or strap.
Battery Replacement
The watch is powered by a Lithium Metal battery (CR2025). When the display becomes dim or functions become erratic, it may be time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
Storage
When not in use, store your watch in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing it near strong magnetic fields.
Troubleshooting
- Display is blank or dim: The battery may be low or depleted. Replace the battery.
- Time is incorrect: Re-set the time and date following the 'Initial Setup' instructions. Ensure the correct 12/24-hour format is selected.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though this model does not feature a lock). If the issue persists, a battery replacement or professional inspection may be required.
- Water appears inside the watch: This indicates a breach in the water resistance. Immediately seek professional service to prevent further damage.
Specifications
- Model Number: 40/8284
- Case Diameter: 54mm
- Movement: Quartz
- Water Resistance: 330 Feet (100 Meters)
- Case and Strap Material: Resin
- Battery Type: 1 Lithium Metal battery (CR2025 recommended)
Image: A visual guide comparing various watch case diameters, illustrating the relative size of different watches on a wrist.
Warranty and Support
For warranty information or technical support, please refer to the official Armitron website or contact Armitron customer service directly. Keep your proof of purchase for any warranty claims.
