BLACK+DECKER OEM 90568785 Circular Saw Rip Fence Instruction Manual

1. Product Overview

The BLACK+DECKER OEM 90568785 Circular Saw Rip Fence is an essential accessory designed to assist in making straight and accurate rip cuts with compatible circular saws. This genuine OEM replacement part ensures proper fit and function with your BLACK+DECKER tools.

Image: The BLACK+DECKER OEM 90568785 Circular Saw Rip Fence, a metal guide designed for making straight cuts with compatible circular saws.

1.1 Compatibility

This rip fence (part number 90568785) is compatible with the following BLACK+DECKER circular saw models:

• CS1014 Type 1
• CS1015 Type 1
• CS1024-AR Type 1, CS1024-B2 Type 1, CS1024-B2C Type 1, CS1024-B3 Type 1, CS1024-B3LZ Type 1, CS1024-BR Type 1
• CS1024D-AR Type 1, CS1024D-B2 Type 1, CS1024D-B2C Type 1, CS1024D-B3 Type 1, CS1024D-BR Type 1
• CS1024K-AR Type 1, CS1024K-B2 Type 1, CS1024K-B2C Type 1, CS1024K-B3 Type 1, CS1024K-BR Type 1
• CS1034-AR Type 1, CS1034-B2 Type 1, CS1034-B2C Type 1, CS1034-B3 Type 1, CS1034-BR Type 1
• STEL311-B3 Type 1
• STSC1718-AR Type 1, STSC1718-B2 Type 1, STSC1718-B2C Type 1, STSC1718-B3 Type 1, STSC1718-BR Type 1
• STSC1718B-AR Type 1, STSC1718B-B2 Type 1, STSC1718-B3 Type 1, STSC1718B-BR Type 1

Always refer to your specific circular saw's instruction manual for detailed compatibility and attachment procedures.

2. Setup and Installation

Follow these general steps to attach the rip fence to your compatible BLACK+DECKER circular saw. Always ensure the saw is unplugged or its battery removed before installation.

1. Identify the Rip Fence Slot: Locate the designated slot on the base plate (shoe) of your circular saw. This slot is typically found at the front or side of the base plate.
2. Insert the Rip Fence: Slide the straight edge of the rip fence into the slot on the saw's base plate. Ensure it slides smoothly and is fully seated.
3. Adjust for Desired Width: Position the rip fence to the desired cutting width. The fence should be parallel to the saw blade.
4. Secure the Fence: Tighten the locking screw or lever on your circular saw that secures the rip fence in place. Ensure it is firmly locked to prevent movement during operation.
5. Verify Alignment: Before making a cut, double-check that the rip fence is parallel to the saw blade and securely fastened.

Note: Specific attachment mechanisms may vary slightly between circular saw models. Consult your circular saw's user manual for precise instructions.

3. Operating Instructions

The rip fence is used to guide your circular saw along a straight line, ensuring consistent width for rip cuts. Always prioritize safety when operating power tools.

1. Measure and Mark: Measure and mark the desired cutting line on your workpiece.
2. Set Rip Fence: Adjust the rip fence to the required distance from the saw blade, ensuring it aligns with your marked cut line. Lock the fence securely.
3. Position Workpiece: Place the workpiece on a stable surface, ensuring it is properly supported and clamped if necessary. The edge of the workpiece against which the rip fence will ride should be straight and smooth.
4. Start the Cut: With the saw blade clear of the workpiece, start the saw. Allow the blade to reach full speed before beginning the cut.
5. Guide the Saw: Gently push the saw forward, keeping the rip fence firmly against the edge of the workpiece. Maintain a steady, consistent feed rate. Do not force the saw.
6. Complete the Cut: Continue guiding the saw until the cut is complete. Release the trigger and allow the blade to stop completely before lifting the saw from the workpiece.

3.1 Safety Precautions During Operation

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and gloves.
• Ensure the workpiece is stable and properly supported to prevent kickback.
• Never attempt to adjust the rip fence or clear debris while the saw is running.
• Keep hands and fingers clear of the saw blade and cutting path.
• Do not use a dull or damaged saw blade.

4. Maintenance

Proper maintenance ensures the longevity and accuracy of your rip fence.

• Cleaning: After each use, wipe down the rip fence with a clean, dry cloth to remove sawdust and debris. For stubborn residue, a mild cleaner can be used, followed by thorough drying.
• Inspection: Regularly inspect the rip fence for any signs of damage, bending, or wear. Ensure it remains straight and free from deformities that could affect cutting accuracy.
• Storage: Store the rip fence in a dry, clean environment, away from extreme temperatures and moisture, to prevent corrosion.

5. Troubleshooting

If you encounter issues while using the rip fence, consider the following:

• Fence Not Straight/Parallel:
  • Ensure the fence is fully inserted into the saw's base plate slot.
  • Verify that the locking mechanism on your saw is securely tightened.
  • Inspect the fence for any physical damage or bending. Replace if damaged.
• Difficulty Attaching/Removing:
  • Check for any debris or obstructions in the saw's rip fence slot.
  • Ensure you are using the correct rip fence for your specific saw model. Refer to the compatibility list in Section 1.1.
  • Consult your circular saw's manual for model-specific attachment instructions.

6. Specifications

7. Safety Information

This rip fence is an accessory for power tools. Always adhere to the safety guidelines provided in your circular saw's instruction manual. Failure to follow all instructions may result in electric shock, fire, and/or serious injury.

• Read All Instructions: Before using this accessory, read and understand all instructions provided with your circular saw.
• Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
• Electrical Safety: Ensure the power tool is unplugged or battery removed before making any adjustments or changing accessories.
• Personal Safety: Stay alert, watch what you are doing, and use common sense when operating power tools. Do not use tools while tired or under the influence of drugs, alcohol, or medication.
• Tool Use and Care: Do not force the tool. Use the correct tool for your application. Maintain tools and accessories properly.

WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

8. Warranty and Support

As an OEM replacement part, the warranty for the BLACK+DECKER OEM 90568785 Circular Saw Rip Fence typically aligns with the warranty of the original BLACK+DECKER circular saw it is intended for, or a standard replacement part warranty. Specific warranty details may vary.

For warranty claims, technical support, or further assistance, please contact BLACK+DECKER customer service directly or refer to the warranty information provided with your original circular saw purchase.

You can often find contact information and support resources on the official BLACK+DECKER website.