Product Overview
The Moen Glyde Chrome Two-Handle High Arc Roman Tub Faucet (Model T373) features an elegantly simple design with graceful curves and contours, providing a transitional style suitable for various decorating trends. This trim kit is designed to work with specific Moen M-PACT common valve systems.
Figure 1: Moen T373 Glyde Chrome Two-Handle High Arc Roman Tub Faucet. This image displays the complete faucet trim, including the high-arc spout and two lever handles, all in a polished chrome finish.
Key Features:
- Versatile Design: Chrome finish offers a highly reflective, mirror-like appearance that complements various decorating styles.
- Temperature Control: Two-handle lever design allows for easy and precise adjustment of water temperature and flow.
- Longstanding Flexibility: Built on the Moen M-PACT common valve system, enabling future style updates without replacing existing plumbing.
- ADA Compliant: Designed to comply with Americans with Disabilities Act (ADA) specifications for accessibility.
Setup and Installation
This faucet trim kit requires a compatible Moen M-PACT common valve for complete installation. The valve is sold separately and is essential for the faucet's operation. Compatible valve models include Moen 4792, 4793, 4794, 4796, 4797, or 4798.
Figure 2: Illustration of the required Moen M-PACT valve system (sold separately). This image shows the internal plumbing components that connect to the faucet trim, highlighting that these parts are not included with the trim kit.
Pre-Installation Checklist:
- Ensure you have purchased one of the required Moen M-PACT valves (4792, 4793, 4794, 4796, 4797, or 4798).
- Gather necessary tools for plumbing installation (e.g., adjustable wrench, pipe wrench, plumber's tape, sealant).
- Turn off the main water supply to the installation area before beginning any work.
Installation Steps (General):
- Refer to the specific installation instructions provided with your Moen M-PACT valve for valve body installation.
- Once the valve body is securely installed and water connections are made, proceed with installing the faucet trim components.
- Mount the spout and handle assemblies onto the deck, ensuring all gaskets and mounting hardware are correctly positioned and tightened.
- Connect the hot and cold water lines from the valve to the corresponding faucet handles.
- Test for leaks by slowly turning on the water supply and inspecting all connections.
Operating Instructions
The Moen T373 Glyde Roman Tub Faucet features two lever handles for independent control of hot and cold water flow, allowing for precise temperature mixing.
- To turn on the water, lift either the hot or cold lever handle.
- To increase water flow, lift the handle further.
- To decrease water flow, lower the handle.
- To mix hot and cold water, adjust both handles simultaneously until the desired temperature is achieved.
- To turn off the water, push both lever handles down completely.
Maintenance and Care
Proper care and maintenance will ensure the longevity and appearance of your Moen T373 Glyde Roman Tub Faucet.
Cleaning Instructions:
- Clean the faucet regularly with a soft, damp cloth and mild soap.
- Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the chrome finish.
- Rinse thoroughly with clean water after cleaning and dry with a soft cloth to prevent water spots.
General Care:
- Periodically check for any loose connections or leaks and address them promptly.
- If water flow becomes restricted, check the aerator for mineral buildup and clean as necessary.
Troubleshooting
This section provides solutions to common issues you might encounter with your Moen T373 Glyde Roman Tub Faucet.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed shut-off valve; debris in water lines. | Clean or replace aerator; ensure shut-off valves are fully open; flush water lines. |
| Leaking from Spout | Worn out cartridge; debris in cartridge. | Replace the cartridge; clean the cartridge. |
| Leaking from Handle Base | Loose packing nut; worn O-rings. | Tighten packing nut; replace O-rings. |
For issues not listed or if troubleshooting steps do not resolve the problem, please contact Moen customer support.
Product Specifications
| Specification | Detail |
|---|---|
| Brand | Moen |
| Model Name | T373 |
| Color | Chrome |
| Finish Type | Chrome |
| Material | Metal |
| Number of Handles | 2 |
| Mounting Type | Deck Mount |
| Hole Count | 3 |
| Maximum Flow Rate | 13 Gallons Per Minute |
| Spout Height | 7.02 Inches |
| Spout Reach | 7.65 Inches |
| Item Weight | 5.24 pounds |
| Product Dimensions | 18.9 x 11.2 x 3.8 inches |
| Included Components | Two-Handle Roman Tub Faucet Trim (Required valve not included) |
| Recommended Uses For Product | Bathroom |
| Handle Type | Lever |
| Style | Contemporary |
| Installation Type | Deck Mounted |
| Handle Location | Left, Right |
| Spout Design | High Arc |
| Special Feature | Durable |
Warranty Information
The Moen T373 Glyde Chrome Roman Tub Faucet is backed by a Lifetime Limited Warranty. This warranty covers defects in material and manufacturing workmanship for the original consumer purchaser. For full details regarding warranty coverage, terms, and conditions, please refer to the official Moen warranty documentation or contact Moen customer support.
Customer Support
If you have any questions, require assistance with installation, operation, or maintenance, or need to file a warranty claim, please contact Moen customer support.
For the most up-to-date contact information and additional resources, please visit the official Moen website: www.moen.com
