Introduction
The FARO G3 ANR Aviation Headset is designed to provide clear audio communication and active noise reduction for aviation environments. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your headset.
What's in the Box
Verify that all the following items are included in your package:
- FARO G3 ANR Aviation Headset
- Auxiliary Audio Cable
- Protective Case
- Ear Cushions (pre-installed or spare set)
Image: The FARO G3 ANR Aviation Headset, showing the headset, control module, and connection cables.
Setup
1. Battery Installation
- Locate the battery compartment on the control module.
- Open the compartment cover.
- Insert two (2) AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
2. Connecting to Aircraft
- Connect the larger plug (microphone) into the aircraft's microphone jack.
- Connect the smaller plug (audio) into the aircraft's audio jack.
3. Bluetooth Pairing
- Ensure the headset is powered on.
- Activate Bluetooth on your mobile device.
- Press and hold the Bluetooth button on the control module until the indicator light flashes, indicating pairing mode.
- Select "FARO G3" from the list of available devices on your mobile device.
- The indicator light will turn solid when successfully paired.
4. Adjusting Fit and Microphone
- Adjust the headband for a comfortable and secure fit over your head.
- Position the earcups so they fully enclose your ears, creating a good seal for optimal noise reduction.
- Bend the microphone boom to position the microphone approximately 1/4 to 1/2 inch from your lips.
Image: The FARO G3 headset viewed from the side, illustrating proper microphone positioning.
Operating Instructions
1. Powering On/Off
- To power on the headset, press and hold the power button on the control module until the indicator light illuminates.
- To power off, press and hold the power button again until the indicator light turns off.
2. Active Noise Reduction (ANR)
- The ANR function activates automatically when the headset is powered on.
- Ensure a good earcup seal for optimal ANR performance.
3. Volume Control
- Use the volume control knob on the control module to adjust the audio level.
4. Bluetooth Audio and Communication
- Once paired, Bluetooth audio from your device will play through the headset.
- Incoming calls can be answered/ended using the phone button on the control module.
5. Auxiliary 3.5mm Audio Input
- Connect an external audio source (e.g., MP3 player) to the 3.5mm AUX input on the control module using the provided auxiliary cable.
- Audio from the auxiliary input will be mixed with aircraft audio.
Image: A close-up view of the FARO G3 control module, highlighting the power, Bluetooth, volume, and auxiliary input controls.
Maintenance
1. Cleaning
- Wipe the headset surfaces with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Clean ear cushions and head pad regularly to prevent buildup.
2. Storage
- Store the headset in its protective case when not in use to prevent damage.
- Remove batteries if the headset will not be used for an extended period to prevent leakage.
3. Ear Cushion Replacement
- Periodically inspect ear cushions for wear and tear.
- Replace worn ear cushions with genuine FARO replacement parts to maintain comfort and ANR performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/ANR not working | Dead or incorrectly installed batteries | Replace batteries, ensuring correct polarity. |
| No audio from aircraft | Cables not fully connected; aircraft audio system off/malfunctioning | Ensure cables are securely plugged in. Check aircraft audio system. |
| Bluetooth not connecting | Headset not in pairing mode; device Bluetooth off | Ensure headset is in pairing mode. Turn on Bluetooth on your device and re-attempt pairing. |
| Poor microphone clarity | Microphone positioned incorrectly | Adjust microphone to be 1/4 to 1/2 inch from your lips. |
Specifications
- Model: FARO-G3
- Weight: 9 Ounces
- Noise Control: Active Noise Cancellation (ANR rated at 52 dB)
- Connectivity: Bluetooth 4.0, 3.5mm Auxiliary Input
- Ear Placement: Over Ear
- Enclosure Material: Carbon Fiber
- Power Source: 2 AA Batteries
- Frequency Range: 20 Hz - 20,000 Hz
- Additional Features: Microphone Included
Warranty Information
The FARO G3 ANR Aviation Headset comes with a 3-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Faro website or contact customer support.
Support
For further assistance, technical support, or to purchase replacement parts, please visit the official Faro website or contact their customer service department. Contact information can typically be found on the manufacturer's website or in the product packaging.