Disney 505MIS
Contents
Disney Minnie Mouse Kids Toddler Bed
Instruction Manual
1. Introduction
Welcome to the world of safe and comfortable sleep for your little one with the Disney Minnie Mouse Kids Toddler Bed by HelloHome. This manual provides essential information for the proper assembly, use, and maintenance of your new toddler bed. Please read all instructions carefully before assembly and retain this manual for future reference.

Figure 1.1: Fully assembled Disney Minnie Mouse Toddler Bed, featuring Minnie Mouse graphics and protective side guards.
2. Safety Information
WARNING: Failure to follow these warnings and the instructions could result in serious injury or death.
- Always ensure all assembly fittings are tightened correctly. Regularly check all fittings to ensure they remain secure.
- Do not use this bed if any parts are broken, torn, or missing. Contact the manufacturer for replacement parts if needed.
- Keep small parts and plastic bags away from children during assembly to prevent choking hazards.
- The bed is designed for children transitioning from a cot, typically ages 18 months to 5 years, or up to a maximum weight of 25 kg (55 lbs).
- Ensure the bed is placed on a flat, stable surface.
- Do not allow children to jump on the bed.
- Keep the bed away from heat sources, open flames, and electrical outlets.
3. Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.
- Headboard (1)
- Footboard (1)
- Side Panels with Protective Guards (2)
- Steel Frame Components (various bars and connectors)
- Fabric Sling Base (1)
- Assembly Hardware (screws, bolts, nuts, Allen keys)
- Instruction Manual (this document)
Note: A Phillips head screwdriver is required for assembly and is not included in the package.
4. Setup and Assembly
Follow these step-by-step instructions carefully for proper assembly. It is recommended to have two adults for assembly.
- Unpack Components: Lay out all components on a soft, clean surface to prevent scratching. Identify each part using the provided parts list.
- Assemble the Frame: Connect the steel frame components according to the diagrams in the separate assembly sheet. Ensure all connections are secure but do not fully tighten screws until the entire frame is assembled.
- Attach Fabric Sling Base: Secure the fabric sling base to the assembled steel frame. Ensure it is taut and evenly distributed.
- Attach Headboard and Footboard: Secure the headboard and footboard to the assembled frame using the provided hardware. Align holes carefully; some force may be required to ensure proper fit.
- Attach Side Panels: Fasten the protective side panels to the headboard and footboard, ensuring they are firmly attached and provide a secure barrier.
- Final Tightening: Once all components are in place, go back and fully tighten all screws and bolts. Do not overtighten.
- Mattress Placement: Place a standard cot bed mattress (140cm x 70cm) onto the fabric sling base. (Mattress not included).

Figure 4.1: The bed frame with the fabric sling base installed, ready for the headboard and footboard.

Figure 4.2: The bed frame with the decorative headboard and footboard attached, showing the overall structure.
5. Operating Instructions
The Disney Minnie Mouse Toddler Bed is designed for safe and comfortable sleep for toddlers. Its low height and protective side guards help prevent falls and make it easy for your child to get in and out of bed independently.
- Ensure the mattress fits snugly within the bed frame to prevent gaps where a child could become entrapped.
- Regularly check the bed for any loose parts or signs of wear.
- The bed is intended for sleeping only. Discourage jumping or rough play on the bed.

Figure 5.1: A child comfortably seated in the assembled Minnie Mouse Toddler Bed, demonstrating its appropriate size and design for young users.
6. Maintenance and Care
Proper care will extend the life of your toddler bed and keep it looking new.
- Cleaning: Wipe down all surfaces with a damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that could damage the finish or graphics.
- Fabric Sling: The fabric sling base can be spot cleaned with a damp cloth. Do not machine wash or tumble dry.
- Inspections: Periodically inspect all screws, bolts, and connections to ensure they are tight and secure. Tighten as necessary.
- Storage: If disassembling for storage, keep all parts and hardware together in a safe place. Store in a dry environment to prevent rust or damage to materials.
7. Troubleshooting
If you encounter any issues with your toddler bed, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly after assembly. | Screws or bolts are not fully tightened. | Go back and tighten all assembly hardware securely. Ensure the bed is on a level surface. |
| Difficulty aligning screw holes during assembly. | Parts are not correctly oriented or slight manufacturing tolerance. | Ensure parts are oriented as per instructions. Apply gentle, consistent pressure to align holes. Do not force excessively. If persistent, contact customer support. |
| Missing parts. | Packaging error. | Do not attempt to assemble. Contact customer support with your purchase details and the specific missing parts. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 505MIS |
| Color | Pink |
| Product Dimensions (L x W x H) | 143 x 77 x 42.5 cm |
| Item Weight | 10.1 kg |
| Shipping Weight | 11.94 kg |
| Primary Material | Wood (MDF) and Alloy Steel |
| Assembly Required | Yes |
| Recommended Mattress Size | 140cm x 70cm (not included) |
| Manufacturer | Worlds Apart |
9. Warranty and Support
This product is manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Disney/HelloHome website. For technical support, replacement parts, or any other inquiries, please contact the retailer where the product was purchased or the manufacturer's customer service department.
Please have your model number (505MIS) and date of purchase ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.