SoundLogic XT Universal Extendable Selfie Stick

SoundLogic XT Universal Extendable Selfie Stick

User Manual

Introduction

Thank you for purchasing the SoundLogic XT Universal Extendable Selfie Stick. This device is designed to help you capture wider and more inclusive photos and videos with ease. Featuring a built-in AUX remote, it offers a simple plug-and-play solution for taking pictures without the need for batteries or Bluetooth pairing. Please read this manual carefully to ensure proper use and to maximize your experience with the product.

Package Contents

  • 1 x SoundLogic XT Universal Extendable Selfie Stick

(Note: Phone not included)

Safety Information

  • Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
  • Keep the device away from water and other liquids.
  • Do not attempt to disassemble or modify the selfie stick. This will void the warranty and may cause damage.
  • Ensure your phone is securely mounted in the holder before extending the stick or taking photos.
  • Avoid using excessive force when extending or collapsing the stick.

Setup

1. Unpacking

Carefully remove the selfie stick from its packaging. Inspect the device for any signs of damage.

2. Attaching Your Device

The selfie stick features an adjustable phone holder. Gently pull apart the spring-loaded clamps of the phone holder and insert your smartphone. Ensure your phone is centered and held firmly in place to prevent it from falling.

Image showing a smartphone securely mounted in the red selfie stick's adjustable holder.

Figure 1: Attaching a smartphone to the selfie stick holder. The holder expands to securely grip various phone sizes.

3. Connecting the AUX Cable

Locate the 3.5mm AUX cable extending from the handle of the selfie stick. Plug this cable into the headphone jack of your smartphone. This connection enables the built-in remote function.

Image showing the red selfie stick with its 3.5mm AUX cable plugged into a smartphone's headphone jack.

Figure 2: The selfie stick with its integrated AUX cable ready for connection. The cable eliminates the need for batteries or Bluetooth.

Operating Instructions

1. Extending the Stick

Hold the handle firmly and gently pull the phone holder section outwards to extend the telescopic arm. The stick can extend up to 41 inches (104 cm). Adjust the length to your desired reach for the perfect shot.

2. Taking Photos

Once your phone is securely mounted and the AUX cable is connected, open your phone's camera application. The selfie stick's built-in remote button on the handle acts as a shutter release. Press the button to capture photos or start/stop video recording.

3. Compatibility

This selfie stick is designed for broad compatibility:

  • Works with iPhone, Android, and Windows phones.
  • Compatible with most smartphones that have a 3.5mm auxiliary jack.
  • No batteries needed; powered directly by your phone's AUX port.
  • No Bluetooth pairing required; simply plug in and shoot.

Maintenance

  • To clean the selfie stick, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Store the selfie stick in a cool, dry place when not in use.
  • Ensure the telescopic sections are clean and free of debris to allow for smooth extension and retraction.

Troubleshooting

ProblemPossible Cause / Solution
Selfie stick button does not take photos.
  • 1. AUX Cable Not Connected: Ensure the 3.5mm AUX cable is fully inserted into your phone's headphone jack.
  • 2. Phone Settings: Some Android phones may require camera settings to be configured to use the volume button as a shutter. Check your camera app settings for "Volume key function" and set it to "Shutter" or "Take picture".
  • 3. Phone Case Interference: A bulky phone case might prevent the AUX cable from fully seating. Try removing the case.
  • 4. Incompatible Phone: While broadly compatible, some older or specific phone models may not fully support AUX shutter control.
Phone is not held securely.
  • 1. Incorrect Placement: Ensure the phone is centered and firmly gripped by both clamps of the holder.
  • 2. Phone Size: The holder is designed for standard smartphone sizes. Extremely large or small devices may not fit optimally.
Stick does not extend or retract smoothly.
  • 1. Debris: Check for any dirt or foreign objects in the telescopic sections. Clean gently with a dry cloth.
  • 2. Damage: Inspect for any bends or damage to the telescopic poles.

Specifications

  • Brand: SoundLogic XT
  • Model: Universal Extendable Selfie Stick
  • Color: Red
  • Extension Length: Up to 41 inches (approx. 104 cm)
  • Connectivity: 3.5mm AUX Cable (wired)
  • Power Source: No batteries required (powered by phone's AUX port)
  • Compatible Devices: Cellphones (iPhone, Android, Windows phones with 3.5mm jack)
  • Item Weight: 0.4 Pounds (approx. 181 grams)

Warranty and Support

This product is covered by a limited manufacturer's warranty. Please refer to the packaging or the retailer's website for specific warranty terms and conditions. For technical support or inquiries, please contact the SoundLogic XT customer service department through their official website or the contact information provided with your purchase.

(Specific warranty details and contact information are not provided in this manual.)

© 2024 SoundLogic XT. All rights reserved.

Product specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.