Introduction
The Blueair Sense+ Air Purifier is designed to enhance your indoor air quality by removing airborne pollutants. This manual provides essential information for the proper setup, operation, and maintenance of your device to ensure optimal performance and longevity.
Product Overview
Key Features
- Patented HEPASilent filtration technology removes 99.97% of airborne pollutants.
- AHAM verified Clean Air Delivery Rates (CADR) of 140 CFM (smoke), 150 CFM (dust), and 120 CFM (pollen).
- Cleans the air in a 186 sq. ft. room 5 times per hour, or a 372 sq. ft. room 2.5 times per hour (based on 8 ft. ceilings).
- Revolutionary combination of advanced filter media and an encapsulated particle-charging chamber for superior results.
- Energy Star certified for efficient operation.
Included Components
- Blueair Sense+ air purifier unit
- Two particle filters
- Product documentation
Product Visuals
Image: The Blueair Sense+ Air Purifier, showcasing its award-winning design.
Image: A close-up view of the Blueair Sense+ Air Purifier's top panel, highlighting its touchless control interface.
Image: The Blueair Sense+ Air Purifier, illustrating its low energy usage feature.
Image: The Blueair Sense+ Air Purifier, highlighting its HEPASilent technology.
Product Video
Video: An official overview of the Blueair Sense+ Air Purifier, demonstrating its features and benefits for indoor air quality.
Setup Instructions
- Unpack the Unit: Carefully remove the air purifier from its packaging. Retain all packaging materials for future transport or storage.
- Remove Protective Packaging: Open the filter compartment (refer to the diagram in the full manual) and remove any plastic wrapping from the filters.
- Install Filters: Insert the filters into their designated slots. Ensure they are seated correctly according to the markings.
- Position the Unit: Place the air purifier on a flat, stable surface in the room where you wish to purify the air. Ensure there is adequate space around the unit for proper airflow (at least 4 inches from walls or furniture).
- Connect to Power: Plug the power cord into a grounded electrical outlet.
Operating Instructions
The Blueair Sense+ features intuitive controls for ease of use.
Power On/Off and Fan Speed
- Touchless Control: Wave your hand over the top panel of the unit to cycle through fan speeds (low, medium, high) and to turn the unit off.
- Voice Control: The unit supports voice control via Amazon Alexa or Vera. Refer to the respective smart home application for setup and command details.
Wi-Fi Connectivity
The Sense+ is Wi-Fi enabled for remote control and monitoring via the Blueair Friend app.
- Download the App: Download the Blueair Friend app from your device's app store.
- Pair Your Device: Follow the in-app instructions to pair your Blueair Sense+ with your smartphone or tablet.
- Remote Control: Once paired, you can adjust fan speed, set schedules, and monitor air quality from anywhere.
Maintenance
Regular maintenance ensures your Blueair Sense+ continues to provide clean air efficiently.
Filter Replacement
- The Blueair Sense+ uses HEPASilent particle filters.
- Filters should be replaced approximately every 6 months, depending on usage and air quality.
- A filter indicator light on the unit will illuminate when it's time for replacement.
- To replace, unplug the unit, open the filter compartment, remove old filters, and insert new ones. Dispose of used filters responsibly.
Cleaning the Unit
- Wipe the exterior of the unit with a soft, dry cloth as needed.
- Do not use abrasive cleaners or solvents.
- Ensure the unit is unplugged before cleaning.
Troubleshooting
If you encounter issues with your Blueair Sense+, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power supply | Check if the power cord is securely plugged into the unit and a working electrical outlet. |
| Poor air purification | Clogged or old filters | Replace the filters. Ensure no protective plastic is left on new filters. |
| Unusual noise | Obstruction in fan or loose component | Unplug the unit and check for any foreign objects. Ensure filters are correctly installed. |
| Wi-Fi connection issues | Network problem or incorrect setup | Ensure your Wi-Fi network is active. Restart the unit and try pairing again via the Blueair Friend app. |
Specifications
| Specification | Value |
|---|---|
| Brand | BLUEAIR |
| Model Number | Sense+ |
| Color | Polar White |
| Power Source | Corded Electric |
| Item Weight | 31 Pounds |
| Control Method | Voice, Touchless (Motion Sensor) |
| Filter Type | HEPA |
| Floor Area Coverage | Up to 200 Square Feet (5 air changes/hour) |
| Noise Level | 56 Decibels (Max) |
| Controller Type | Amazon Alexa, Vera |
| Special Features | Wi-Fi Enabled, Manual Control |
| Specification Met | Energy Star Certified |
| UPC | 689122003160, 689122001920 |
Warranty and Support
For detailed warranty information and customer support, please refer to the product documentation included with your Blueair Sense+ Air Purifier or visit the official Blueair website. Keep your proof of purchase for warranty claims.