INTEX 58292EP Canopy Island Inflatable Pool Float Instruction Manual

1. Introduction

The Intex Canopy Island Inflatable Pool Float is designed for comfortable relaxation on water. It features a spacious lounge surface, built-in cup holders, and a detachable sunshade for optimal comfort and convenience. This manual provides essential information for the safe and proper setup, operation, and maintenance of your pool float.

Key Features:

• Comfortable lounge surface for relaxation.
• Detachable fabric sun shade for protection from the sun.
• Durable construction with 2 air chambers and extra thick puncture-resistant PVC.
• Built-in cup holders for convenience.
• All-around grab rope for easy handling.

2. Important Safety Information

WARNING: This is not a life-saving device. Do not leave children unattended while device is in use. Constant, competent mature supervision is required at all times. Never allow diving or jumping onto or from this product. Not for use in open water. Maintain a clear space of water on all sides. Use only in sheltered waters and lakes with land in sight. Never tow from any vehicle. Never wrap ropes or cords around head or any other body part. Never use while consuming or under the influence of alcohol or drugs. Never leave in or near the water when not in use. Never use in high wind, rough currents, open water or dangerous tides. Never swim underneath this product. Maximum weight capacity: 440 lbs (200 kg). See package for additional warnings.

Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

3. Package Contents

Please check to ensure all items are present:

• 1 x Intex Canopy Island Inflatable Pool Float
• 1 x Detachable Fabric Sun Shade
• Support Poles for Sun Shade (Quantity: 3)
• All-around Grab Rope
• Repair Patch Kit (if included)

Figure 3.1: Intex Canopy Island Inflatable Pool Float.

4. Setup Instructions

4.1 Inflation

1. Unfold the pool float on a clean, flat surface, free from sharp objects.
2. Locate the inflation valves. The float has multiple air chambers for stability and safety.
3. Using an air pump (not included), inflate each air chamber until it is firm to the touch but not overinflated. Ensure the valves are securely closed after inflation.
4. Do not use a high-pressure air compressor, as this may damage the float.

4.2 Attaching the Detachable Sun Shade

1. Assemble the three tent-like support poles. Ensure they are securely connected.
2. Insert the assembled poles into the designated sleeves on the fabric sun shade.
3. Attach the sun shade to the main float body using the provided attachment points and ropes. Secure the ropes to the all-around grab rope or other designated loops on the float.
4. Adjust the sun shade to your desired position for optimal sun protection. The sun shade can also be detached if not needed.

Figure 4.1: Key features and components of the Canopy Island.

Figure 4.2: Detailed view of cup holders, material durability, and airtight design.

5. Operating Instructions

5.1 Using the Pool Float

• Carefully place the inflated float into the water.
• Board the float gently to avoid tipping. The float is designed for up to two adults, with a maximum weight capacity of 440 lbs (200 kg).
• Utilize the comfortable lounge surface for reclining. The backrest provides support.
• Place beverages in the built-in cup holders to keep them secure.
• The all-around grab rope can be used for holding onto the float or for maneuvering it in the water.

5.2 Canopy Usage

• The detachable sun shade provides shade from direct sunlight.
• If you prefer full sun exposure, the canopy can be easily removed by detaching the support poles and fabric from the float.

Figure 5.1: Users enjoying the Canopy Island float in a pool.

6. Maintenance

6.1 Cleaning

• After each use, rinse the float with fresh water to remove chlorine, salt, or dirt.
• Clean with a mild soap solution and a soft cloth. Do not use harsh chemicals or abrasive cleaners.

6.2 Drying and Storage

• Ensure the float is completely dry before deflating and storing to prevent mold and mildew.
• Deflate the float by opening the air valves.
• Fold the float neatly and store it in a cool, dry place, away from direct sunlight and sharp objects.

6.3 Repair

• In case of a small puncture, use the included repair patch kit.
• Clean and dry the damaged area thoroughly before applying the patch. Follow the instructions provided with the repair kit.

7. Troubleshooting

8. Specifications

• Model: INTEX 58292EP
• Brand: Intex
• Inflated Size (Approximate): 78.5 inches (L) x 59 inches (W)
• Material: Extra-thick, puncture-resistant PVC
• Weight Limit: 440 lbs (200 kg)
• Air Chambers: 2
• Color: White
• Age Range: Adult
• Item Weight: 21.9 Pounds
• UPC: 078257308828

Figure 8.1: Inflated dimensions of the Canopy Island.

9. Warranty and Support

For warranty information, product support, or to purchase replacement parts, please contact Intex customer service. Refer to the product packaging or the official Intex website for the most current contact details and warranty terms.

Intex designs, builds, and tests all its products to high standards with safety as a primary concern. Their affordable and innovative products are built to last.