1. Introduction
This manual provides essential information for the installation, operation, and maintenance of the Comelit KITVEDO34EN Anti-Intrusion Kit. This comprehensive security system is designed to protect your premises by detecting unauthorized entry and alerting you to potential threats. Please read this manual thoroughly before attempting any installation or operation.
2. Product Overview and Components
The Comelit KITVEDO34EN Anti-Intrusion Kit includes the following key components:
- Vedo 34 Control Panel (VEDO34): The central unit managing all system functions.
- Safe Key Keypad (VEDOLCD): For arming, disarming, and system configuration.
- 2 Volumetric Sensors (DT011B): Detect motion within protected areas.
- 4 Magnetic Contacts (30087001): Secure doors and windows, detecting opening.
- Outdoor Siren (SIR300AW): Provides audible alerts upon alarm activation.
Image 1: Comelit KITVEDO34EN Anti-Intrusion Kit components. This image displays the complete kit, including the main control panel, an outdoor siren, the Safe Key keypad, two volumetric sensors, and four magnetic contacts.
3. Setup and Installation
Installation of the Comelit KITVEDO34EN system requires technical knowledge and should ideally be performed by a qualified professional to ensure optimal performance and compliance with local regulations. The kit does not include batteries, which may be required for certain components.
3.1. Control Panel Placement
Select a secure, central location for the Vedo 34 control panel, away from direct sunlight, moisture, and extreme temperatures. Ensure it is accessible for maintenance but not easily tampered with.
3.2. Sensor and Contact Installation
- Volumetric Sensors: Install in corners of rooms to maximize coverage, avoiding areas with strong air currents or heat sources that could cause false alarms.
- Magnetic Contacts: Mount on doors and windows, ensuring proper alignment between the magnet and the sensor unit when the opening is closed.
3.3. Keypad and Siren Connection
Connect the Safe Key keypad and the outdoor siren to the control panel according to the wiring diagrams provided in the detailed installation guide (not included in this general manual). Ensure all connections are secure and properly insulated.
3.4. Power Connection
Connect the control panel to a stable power source. Verify that all components receive power and the system initializes correctly.
4. Operating Instructions
The Safe Key keypad is your primary interface for operating the Comelit anti-intrusion system.
4.1. Arming the System
To arm the system, enter your user code on the Safe Key keypad and press the arm button (refer to keypad specific symbols). The system will provide an exit delay, allowing you to leave the premises before it fully arms.
4.2. Disarming the System
Upon re-entry, the system will initiate an entry delay. Enter your user code on the Safe Key keypad within this delay period to disarm the system. Failure to do so will trigger an alarm.
4.3. Alarm Events
In case of an alarm, the outdoor siren will activate, and the control panel may send notifications if configured for remote monitoring. To silence an alarm, disarm the system using your user code.
4.4. Zone Management
The system allows for partitioning into different zones. Consult the detailed programming manual for instructions on how to arm specific zones or bypass certain sensors.
5. Maintenance
Regular maintenance ensures the longevity and reliability of your Comelit anti-intrusion system.
- Monthly: Test all sensors and contacts by triggering them while the system is armed (in test mode, if available). Verify the siren activates.
- Quarterly: Clean the exterior of the control panel, keypad, and sensors with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Annually: Have a qualified technician inspect the system, check wiring, and test battery backups (if installed).
6. Troubleshooting
If you encounter issues with your Comelit anti-intrusion system, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| System does not arm | Open zone/door/window; power issue; sensor fault | Check all doors and windows are closed. Verify power supply. Check keypad for fault indicators. |
| False alarms | Improper sensor placement; environmental factors (pets, drafts); faulty sensor | Review sensor placement. Ensure pets cannot trigger motion sensors. Contact professional for sensor diagnostics. |
| Keypad unresponsive | Power loss to keypad; loose connection | Check power to the control panel. Inspect keypad wiring connections. |
If problems persist, contact a qualified security system technician or Comelit customer support.
7. Specifications
Key technical specifications for the Comelit KITVEDO34EN Anti-Intrusion Kit:
| Attribute | Value |
|---|---|
| Brand | Comelit |
| Model Number | KITVEDO34EN |
| Product Dimensions | 38.5 x 28 x 35.6 cm |
| Item Weight | 4.2 Kilograms |
| Color | Multicolore |
| Alert Type | Audio and motion |
| Batteries Included? | No |
| Batteries Required? | No |
| First Available Date | 1 December 2015 |
8. Warranty and Support
For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact your retailer. Comelit provides technical support for its products. For assistance, please visit the official Comelit website or contact their customer service department.
