FH Group Universal Car Seat Covers Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, care, and maintenance of your FH Group Universal Car Seat Covers. These seat covers are designed to protect your vehicle's upholstery while offering comfort and a refreshed interior appearance. The material is durable and breathable, featuring 3mm foam padding for enhanced comfort.

The full set includes covers for two front seats, a rear bench seat, and five headrests. It is designed for universal fit in most sedans, SUVs, trucks, and vans, and features airbag-compatible stitching for safety.

2. Product Features

• Universal Fit: Designed to fit most vehicles including sedans, SUVs, and trucks.
• Airbag Compatible: Features special stitching to ensure safe airbag deployment.
• Washable Cloth: Easy to clean and maintain; machine washable.
• Split Bench Compatible: Rear seat covers accommodate various split bench configurations (40/60, 60/40, 50/50, 40/20/40).
• Storage Pockets: Front seat covers include built-in back pockets for convenience.
• Breathable Foam Padding: 3mm foam padding provides comfort and protection.

Image 2.1: FH Group Universal Car Seat Covers Full Set (Black).

Image 2.2: Compatibility guide illustrating supported seat features like detachable headrests, split benches, and airbag compatibility.

3. Package Contents

The FH Group Universal Car Seat Covers Full Set includes:

• 2 Front Seat Covers
• 1 Rear Bench Backrest Cover
• 1 Rear Bench Bottom Cover
• 5 Headrest Covers
• Installation Hardware (metal clips, adjustable straps)
• 2 Mesh Pieces (for split bench functionality)

4. Installation Instructions

4.1. Front Seat Covers Installation

1. Prepare the Seat: Ensure the seat is clean and free of debris.
2. Headrest Cover:
   • If your headrest is removable, remove it from the seat. Slip the headrest cover over the headrest and reattach the headrest to the seat.
   • If your headrest is non-removable, carefully slip the headrest cover over the headrest and adjust for a snug fit.
3. Position the Seat Cover: Slip the main front seat cover over the seat, ensuring the airbag-compatible tag is on the door side.
4. Secure the Straps: Locate the adjustable straps on the underside of the seat cover. Push these straps through the crevice between the seat back and seat bottom. From the rear of the seat, pull the straps through and connect them using the adjustable buckles. Pull tight for a secure and snug fit.
5. Tuck Fabric: Tuck any excess fabric into the seat frame for a smooth appearance.

4.2. Rear Seat Covers Installation

1. Prepare the Seat: Ensure the rear bench seat is clean.
2. Backrest Cover:
   • Slip the rear backrest cover over the seat.
   • For removable headrests, you may need to cut small X-slits in the fabric where the headrest posts re-enter the seat. Tuck the fabric around the holes in the base.
   • For non-removable headrests, feed the fabric under the headrest base and tuck securely.
   • From the rear of the seat, pull the adjustable straps through the crevice and connect them using the buckle clips. Adjust and tighten for a secure fit.
3. Bench Bottom Cover:
   • Stretch the bench bottom cover over the rear seat.
   • Tuck the straps into the crevice between the seat back and seat bottom. Pull them from underneath the seat to the front and secure with the adjustable buckles.
   • If there is no space under your seat bottom, simply tuck the fabric into the crevice and any remaining fabric under the seat bottom.
4. Split Bench Functionality:
   • The rear seat covers feature zippers to accommodate solid or split bench seats. Unzip the main cover to separate it into two pieces.
   • Use the included mesh pieces to cover the exposed sides of the split bench. Zip one mesh piece onto one side of the cover, and the second mesh piece onto the opposite side.
   • This allows individual sections of the rear seat to be folded down independently.
5. Seatbelt Access: To gain access to seatbelt buckles, you may need to make small slits in the fabric near the buckle locations. Tuck the fabric securely into the crevice around the buckle.

5. Care and Maintenance

To maintain the longevity and appearance of your FH Group Car Seat Covers:

• Washing: The seat covers are machine washable. Remove them from the seats before washing.
• Drying: Air dry the seat covers. Do not tumble dry or use high heat, as this may damage the fabric or foam padding.
• Spot Cleaning: For minor spills or stains, spot clean with a mild detergent and damp cloth.

6. Troubleshooting

If you encounter any issues during installation or use, consider the following:

• Loose Fit: Ensure all adjustable straps are pulled tight and securely fastened. Tuck any excess fabric firmly into the seat crevices.
• Headrest Issues: Verify if your vehicle has removable or non-removable headrests and follow the appropriate installation steps. Ensure X-slits for removable headrests are cut precisely.
• Split Bench Alignment: Double-check that the mesh pieces are correctly zipped and aligned to cover exposed areas and allow proper folding.
• Seatbelt Access: If seatbelts are obstructed, carefully make small, precise slits in the fabric to allow access to the buckles.

7. Specifications

8. Warranty and Support

For warranty information or product support, please contact FH Group directly:

• Website: www.fhgroupauto.com
• Email: info@fhgroupauto.com
• Phone: 1-800-928-5518