Introduction
This manual provides instructions for the LTWHOME Replacement Fine Filter Pads, designed for Eheim Professional Pro 2 and Experience 350 aquarium filter systems. These pads enhance biological filtration and maintain efficient water flow in both freshwater and saltwater environments. Please read these instructions carefully before installation and use.
Product Overview
The LTWHOME Replacement Fine Filter Pads are designed to provide effective mechanical and biological filtration for your aquarium. Each pack contains 12 filter pads.

Image: A single LTWHOME Replacement Fine Filter Pad, showcasing its white, porous material.
These pads are approximately 20.4 x 20.4 x 2.4 cm in size and are engineered to provide efficient water flow with less clogging, ensuring long-lasting filtration performance.

Image: An illustration highlighting the filter pad's design for reduced clogging and efficient water flow.
The specialized material enhances biological filtration, contributing to a healthier aquatic environment by supporting beneficial bacteria.

Image: Multiple LTWHOME Replacement Fine Filter Pads, indicating bulk packaging.
Compatibility
These replacement fine filter pads are compatible with the following Eheim filter systems:
- Eheim Professionel Pro 2 models: 2226, 2326, 2228, 2328, 2026, 2126, 2028, 2128
- Eheim Experience 350
Installation Instructions
Follow these steps to install the LTWHOME Replacement Fine Filter Pads into your compatible Eheim filter system:
- Preparation: Disconnect the power supply to your Eheim filter system and turn off any associated pumps. This prevents electrical hazards and water spills.
- Access Filter: Carefully open your Eheim filter canister according to its specific manufacturer instructions. Ensure you have a towel or bucket ready to catch any residual water.
- Remove Old Pads: Locate and remove the used fine filter pads from their designated compartment within the filter. Dispose of old pads responsibly.
- Insert New Pads: Place the new LTWHOME Replacement Fine Filter Pads into the filter compartment. Ensure they fit snugly and cover the filtration area completely. Refer to your Eheim filter's diagram for correct placement of different media layers.
- Reassemble: Securely close the filter canister, ensuring all seals are properly seated to prevent leaks. Double-check all connections.
- Restart System: Reconnect the power supply to your filter system and restart it. Monitor for any leaks or unusual operation during the first few hours.
Usage and Maintenance
The LTWHOME Replacement Fine Filter Pads are designed for continuous use in your aquarium filter system. Regular inspection and timely replacement are crucial for maintaining optimal water quality.
Replacement Frequency
The frequency of replacement depends on your aquarium's bioload, feeding habits, and overall water conditions. As a general guideline, inspect the fine filter pads monthly. Replace them when they appear visibly clogged, discolored, or when water flow through the filter significantly decreases. Typically, fine filter pads are replaced every 1 to 3 months to ensure efficient mechanical and biological filtration.
Cleaning
These fine filter pads are disposable and not intended for cleaning and reuse. Attempting to clean and reuse them may compromise their filtration efficiency and introduce unwanted substances back into your aquarium. Always use new replacement pads for best results.
Troubleshooting
If you encounter issues with your filter system after installing the replacement pads, consider the following:
Reduced Water Flow
- Check Filter Pads: The most common cause of reduced flow is a clogged fine filter pad. Inspect the pads and replace them if they are heavily soiled.
- Other Media: Ensure other filter media (e.g., coarse sponges, biological media) are not clogged. Clean or replace as necessary.
- Pump Issues: Verify that your filter pump is operating correctly and is not obstructed by debris.
Poor Water Clarity
- Replace Fine Pads: If water clarity is poor, the fine filter pads may be saturated with particulate matter. Replace them with new pads.
- Water Parameters: Check your aquarium's water parameters (ammonia, nitrite, nitrate) to ensure biological filtration is effective. Address any imbalances.
Specifications
| Feature | Detail |
|---|---|
| Model Number | EP2226FF12 |
| Package Dimensions | 16.81 x 9.17 x 5.63 inches |
| Item Weight | 7 ounces |
| Quantity | 12 pieces per pack |
| Approximate Size (each pad) | 20.4 x 20.4 x 2.4 cm |
| Compatibility | Eheim Professionel Pro 2 (2226, 2326, 2228, 2328, 2026, 2126, 2028, 2128), Eheim Experience 350 |
| Environment | Freshwater and Saltwater |
Warranty Information
No specific warranty information is provided for this product by the manufacturer. Please refer to the retailer's return policy or contact LTWHOME directly for any warranty-related inquiries.
Customer Support
For further assistance or questions regarding the LTWHOME Replacement Fine Filter Pads, please visit the official LTWHOME website or contact their customer service department through the retailer where the product was purchased.
You can also visit the LTWHOME Store on Amazon for more information and product details.