Kichler 18141

Download PDF
Contents

Kichler 18141 LED Bulb Instruction Manual

Model: 18141

1. Product Overview

The Kichler 18141 is a high-power, damp location rated MR16 Bi-Pin 12V LED lamp. This LED bulb is designed as an energy-efficient alternative to 35-40W halogen lamps. It features a 3000K pure white color temperature and provides a 60-degree wide flood beam spread angle, suitable for various lighting applications.

Kichler 18141 LED Bulb

Image 1.1: Front view of the Kichler 18141 LED Bulb. This image shows the bulb's MR16 shape with its bi-pin base.

2. Safety Information

  • WARNING: Disconnect power before installation or servicing.
  • This product is designed for 12V systems only. Connecting to higher voltage may damage the bulb and fixture.
  • Ensure the fixture is compatible with MR16 bi-pin socket bases.
  • Do not disassemble or modify the bulb.
  • Avoid touching the bulb with bare hands during operation or immediately after turning off, as it may be hot.
  • Dispose of used bulbs according to local regulations.

3. Package Contents

The package contains the following item:

  • 1 x Kichler 18141 LED Bulb

4. Specifications

FeatureDetail
BrandKichler
Model Name3000K LED MR16 5W 60 Degree
Part Number18141
Light TypeLED
Bulb Shape SizeMR16
Wattage5 watts
Incandescent Equivalent Wattage40 Watts
Voltage12 Volts
Color Temperature3000K (Pure White)
Beam Angle60 Degree (Wide Flood)
White Brightness3200 Lumens
MaterialAluminum
FinishClear
Item Weight10 Pounds
Product Dimensions8.25 x 9.25 x 10 inches
Specific UsesCeiling Fan (Note: This is a general category, the bulb is suitable for any compatible MR16 fixture.)
GTIN/UPC783927472739

5. Setup and Installation

This Kichler 18141 LED bulb is designed for easy installation into compatible fixtures. It is intended for use with any Kichler Lighting drop-in fixture with a medium aperture that has a matching MR16 bi-pin socket-base.

  1. Turn off Power: Before beginning installation, ensure the power to the fixture is completely turned off at the circuit breaker or fuse box.
  2. Remove Old Bulb (if applicable): If replacing an existing bulb, allow it to cool completely. Gently pull the old MR16 bulb straight out from its socket. Do not twist.
  3. Insert New LED Bulb: Align the two pins on the base of the Kichler 18141 LED bulb with the holes in the MR16 bi-pin socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
  4. Restore Power: Once the bulb is securely installed, restore power to the fixture.
  5. Test: Turn on the light switch to confirm the bulb is functioning correctly.
Kichler 18141 LED Bulb bi-pin base

Image 5.1: Close-up view of the Kichler 18141 LED Bulb's bi-pin base. This image highlights the two pins that connect to the fixture's socket.

6. Operation

The Kichler 18141 LED bulb operates like a standard light bulb. Once properly installed in a compatible 12V fixture, it will illuminate when power is supplied to the fixture via its switch or control mechanism.

  • Ensure the fixture's power switch is in the "ON" position.
  • If connected to a dimmer, ensure the dimmer is compatible with LED lighting to prevent flickering or damage.

7. Maintenance

The Kichler 18141 LED bulb requires minimal maintenance.

  • Cleaning: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Replacement: LED bulbs have a long lifespan. When replacement is eventually needed, follow the installation steps in Section 5 to safely remove the old bulb and install a new one.

8. Troubleshooting

ProblemPossible CauseSolution
Bulb does not light up.No power to the fixture.
Bulb not properly seated.
Incorrect voltage.
Faulty bulb.
Check circuit breaker and wall switch.
Ensure bulb pins are fully inserted into the socket.
Verify fixture is 12V.
Replace bulb with a known working one.
Bulb flickers.Incompatible dimmer switch.
Loose connection.
Voltage fluctuations.
Ensure dimmer is LED-compatible.
Re-seat the bulb firmly.
Consult an electrician if voltage issues are suspected.
Bulb is dim.Dimmer setting too low.
Incorrect voltage.
Adjust dimmer to a higher setting.
Verify fixture is 12V.

9. Warranty and Support

The Kichler 18141 LED Bulb comes with a 6-year limited warranty. For warranty claims or technical support, please contact Kichler Lighting customer service. Keep your proof of purchase for warranty validation.

For more information and support, visit the official Kichler website or contact their customer service department.

Manufacturer: Kichler Lighting, LLC.

© 2023 Kichler Lighting, LLC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.