RAB VANLED20 20W LED Canopy Light Fixture User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB VANLED20 20W LED Canopy Light Fixture. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for commercial lighting applications, offering high efficiency and durability.

Image 1.1: The RAB VANLED20 20W LED Canopy Light Fixture. This image shows the compact, low-profile design of the white LED canopy light, suitable for various commercial installations.

2. Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.

• Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
• Ensure the supply voltage is correct (120V-277V AC).
• Do not handle live components.
• Wear appropriate personal protective equipment (PPE) during installation.
• This fixture is suitable for wet locations.
• Do not modify the fixture. Any modifications may void the warranty and create safety hazards.

3. Package Contents

Verify that all components are present before beginning installation:

• RAB VANLED20 20W LED Canopy Light Fixture (1)
• Mounting Hardware (Screws, Gaskets, etc.)
• Installation Guide (This document)

4. Setup and Installation

The VANLED20 is designed for ceiling mount installation to a recessed junction box or directly to the ceiling surface. It features side conduit entry points for flexible wiring.

1. Prepare the Installation Site:
   • Turn off power at the circuit breaker.
   • Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 10.76 lbs).
2. Mounting Options:
   • Recessed Junction Box: Use the provided knockout template to align and secure the fixture to the junction box.
   • Direct Ceiling Surface: Utilize the side conduit entry points for wiring. Secure the fixture directly to the ceiling using appropriate mounting hardware (not always included, check package contents).
3. Wiring:
   • Connect the fixture's wires to the building's electrical supply wires according to local electrical codes.
   • Ensure proper grounding.
   • The fixture supports 120V-277V AC input.
   • Seal all conduit entries and the rear wire plug with weatherproof sealant to maintain the IP66 rating.
4. Secure the Lens:
   • Ensure the vandal-resistant polycarbonate textured opaque drop lens is securely fastened to the die-cast aluminum housing.
5. Restore Power:
   • Once installation is complete and all connections are secure, restore power at the circuit breaker.

5. Operating Instructions

The RAB VANLED20 is an automatic LED light fixture. Once properly installed and powered, it will illuminate. It does not feature manual on/off switches on the unit itself. Control is typically managed via the building's electrical circuit or an external remote control system, if integrated.

• Power On: Ensure the circuit breaker supplying power to the fixture is in the "ON" position.
• Remote Control (Optional): If your installation includes a compatible remote control system, refer to the instructions provided with that system for operation. The fixture itself supports remote control functionality.
• Light Output: The 20W LED provides cool 5000K illumination.

6. Maintenance

The RAB VANLED20 LED Canopy Light Fixture is designed for minimal maintenance, offering a long operational life of up to 100,000 hours.

• Cleaning: Periodically clean the exterior of the fixture and lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or lens. Ensure power is off before cleaning.
• Inspection: Annually inspect the fixture for any signs of damage, loose connections, or wear. Pay attention to the integrity of the housing and lens.
• LEDs: The integrated LED array is not user-serviceable. If the LEDs fail, the entire fixture typically requires replacement.

7. Troubleshooting

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support or a qualified electrician.

8. Specifications

• Model: VANLED20W
• Wattage: 20W
• Light Source: LED
• Color Temperature: 5000K (Cool White)
• Input Voltage: 120V-277V AC
• Lifespan: 100,000 Hours
• Material: Die-cast Aluminum Housing, Polycarbonate Lens
• Ingress Protection (IP) Rating: IP66 (Dust tight and protected against powerful water jets)
• UL Listing: Suitable for wet locations
• Mounting: Ceiling mount (recessed junction or direct surface)
• Weight: Approximately 10.76 lbs (4.88 kg)
• Control Method: Remote (via external system) / Push Button (via external system)
• UPC: 019813266299

9. Warranty Information

RAB Lighting products are backed by a comprehensive warranty. For specific warranty terms and conditions applicable to the VANLED20W fixture, please refer to the official RAB Lighting website or contact their customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Note: The provided product data mentions optional protection plans (e.g., 4-Year Protection Plan). These are typically third-party plans and separate from the manufacturer's standard warranty.

10. Customer Support

For technical assistance, replacement parts, or further information regarding your RAB VANLED20 20W LED Canopy Light Fixture, please contact RAB Lighting directly:

• Website: www.rablighting.com
• Phone: Refer to the RAB Lighting website for current contact numbers.
• Email: Refer to the RAB Lighting website for current contact email addresses.

When contacting support, please have your model number (VANLED20W) and purchase date available.