Conair Titanium Tourmaline Split Barrel Conical Multi-Functional Flat Iron, Waver and Wand

Introduction

The Conair Titanium Tourmaline Split Barrel Conical Multi-Functional Flat Iron, Waver and Wand is a versatile hair styling tool designed to curl, straighten, crimp, or wave your hair. Its innovative split barrel design allows it to function as a flat iron for smoothing and adding shine, or to be locked together to form a tapered curling wand for creating various curl types.

This manual provides essential information for the safe and effective use of your new styling tool, including setup, operation, maintenance, and troubleshooting.

Important Safety Information

To reduce the risk of electric shock, burns, fire, or injury to persons, always follow basic safety precautions when using electrical appliances.

• Keep away from water. Do not use while bathing or in a shower.
• Always unplug the appliance immediately after using.
• Do not place or store appliance where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• Do not reach for an appliance that has fallen into water. Unplug immediately.
• Avoid direct contact of the heated surfaces with skin to prevent burns.
• Do not use near flammable materials or aerosols.
• Ensure the appliance is unplugged and cooled before cleaning or storing.

Setup

Before first use, ensure the product is free from any packaging materials. Inspect the power cord for any damage. If any damage is observed, do not use the appliance and contact customer support.

1. Uncoil the power cord completely.
2. Plug the appliance into a standard electrical outlet. Ensure your hands are dry when plugging in or unplugging the unit.
3. Place the appliance on a heat-resistant surface, away from any flammable materials.

Figure 1: Conair Multi-Functional Flat Iron in open position.

Operating Instructions

Powering On and Temperature Selection

1. Once plugged in, locate the power switch and turn the appliance ON.
2. Select your desired temperature setting using the adjustable heat controls. The available settings are 340°F (170°C), 400°F (200°C), and 450°F (230°C). Allow the iron to heat up for a few moments until the indicator light (if present) signals readiness.

Figure 2: Temperature control settings.

Using as a Flat Iron (Straightener or Twin Barrel)

For straightening or creating soft waves, use the appliance in its open position.

1. Ensure hair is clean, dry, and tangle-free.
2. Take a small section of hair and place it between the heated plates.
3. Gently close the plates and glide the iron down the hair section from root to tip.
4. Repeat as necessary until desired smoothness or wave is achieved.

Figure 3: Appliance in flat iron configuration.

Using as a Conical Curling Wand

To create tousled curls or tight ringlets, engage the lock-in function to transform the split barrel into a tapered curling wand.

1. Close the two barrels together and engage the lock mechanism (refer to product diagram for lock location). This will form a single conical wand.
2. Take a section of hair and wrap it around the tapered barrel, starting from the wider base and wrapping towards the narrower tip for tighter curls.
3. Hold for a few seconds (duration depends on hair type and desired curl intensity).
4. Release the hair gently.
5. The clipless barrel is studded with tiny silicone guides to assist in positioning hair for spiral curls.

Figure 4: Appliance in conical curling wand configuration.

Figure 5: Approximate size reference of the styling tool.

Maintenance

Cleaning

Always ensure the appliance is unplugged and completely cool before cleaning.

• Wipe the exterior surfaces with a soft, damp cloth.
• Do not use abrasive cleaners or solvents.
• Never immerse the appliance in water or any other liquid.

Storage

When not in use, store the appliance in a cool, dry place. Do not wrap the cord around the appliance, as this can cause premature wear and breakage of the cord.

Troubleshooting

Specifications

Warranty and Support

For information regarding warranty coverage, product registration, or customer support, please refer to the warranty card included with your purchase or visit the official Conair website.

You can also visit the Conair Store on Amazon for additional product information and support resources.