AXA Riff LED Bicycle Taillight User Manual

1. Introduction

Thank you for choosing the AXA Riff LED Bicycle Taillight. This manual provides essential information for the safe and efficient use of your new taillight. The AXA Riff is designed with advanced light guide technology to enhance visibility and safety during cycling.

Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Package Contents

The package should contain the following items:

• 1 x AXA Riff LED Bicycle Taillight

If any items are missing or damaged, please contact your retailer.

3. Safety Information

Always prioritize safety when cycling. This taillight is designed to increase your visibility to others, but it does not replace safe cycling practices.

• Ensure the taillight is securely mounted before each ride.
• Regularly check the battery level to ensure continuous operation.
• Do not look directly into the LED light when it is on, as it may cause temporary vision impairment.
• Keep out of reach of children.
• Dispose of batteries according to local regulations.

4. Setup and Installation

The AXA Riff LED Taillight is designed for saddle mounting. Follow these steps for proper installation:

1. Unpack the Taillight: Carefully remove the taillight from its packaging.
2. Battery Installation: The product includes batteries. For future replacement, locate the battery compartment, typically on the rear or side of the unit. Insert the required batteries, ensuring correct polarity (+/-).
3. Mounting to Saddle: Attach the taillight to the rear of your bicycle's saddle or seat post using the provided mounting bracket. Ensure the bracket is tightened securely to prevent movement during rides.
4. Positioning: Adjust the angle of the taillight so it is clearly visible to traffic approaching from the rear. It should be positioned horizontally and facing directly backward.

Figure 1: The AXA Riff LED Bicycle Taillight, typically mounted on a bicycle's seat post or saddle.

5. Operating Instructions

The AXA Riff LED Taillight features simple operation:

1. Power On/Off: Locate the power switch on the taillight. Slide the switch to the "ON" position to activate the light. Slide it to the "OFF" position to turn it off.
2. Light Modes: The taillight has 2 settings. These typically include a steady mode and a flashing mode. Cycle through the modes by pressing the power button or a dedicated mode button (if present, otherwise assume the main switch controls modes).
3. Battery Life: The taillight provides approximately 100 hours of battery life, depending on the selected mode and battery type.

Always ensure the light is functioning correctly before starting your ride, especially in low-light conditions.

6. Maintenance

To ensure the longevity and optimal performance of your AXA Riff LED Taillight, follow these maintenance guidelines:

• Cleaning: Wipe the light housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the plastic material.
• Battery Replacement: When the light dims or stops functioning, replace the batteries. Open the battery compartment, remove old batteries, and insert new ones, observing correct polarity.
• Water Resistance: The taillight is water-resistant (IPX6 rated), meaning it can withstand strong jets of water. However, it is not designed for submersion. Ensure the battery compartment cover is securely closed to maintain water resistance.
• Storage: If storing the taillight for an extended period, remove the batteries to prevent leakage and potential damage.
• Inspection: Periodically check the mounting bracket for tightness and ensure the light is free from cracks or damage.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official AXA website. Keep your proof of purchase for any warranty claims.

For further assistance, you may contact AXA customer service through their official channels.