LeisureMod Oyster Modern Dining Side Chair Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, usage, and maintenance of your LeisureMod Oyster Modern Dining Side Chair. Please read all instructions carefully before assembly and retain this manual for future reference. This chair features a modern design with a transparent polycarbonate backrest and sleek chrome legs, designed for dining and general seating purposes.

Image 1.1: Fully assembled LeisureMod Oyster Modern Dining Side Chair in black.

2. Safety Information

• Ensure all components are securely fastened before use. Periodically check and retighten fasteners.
• Do not stand on the chair.
• Do not exceed the maximum weight recommendation of 20.4 pounds (9.25 kg).
• Keep small parts away from children during assembly.
• Use the chair on a flat, stable surface to prevent tipping.

3. Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact LeisureMod customer support for assistance.

• 1 x Polycarbonate Seat and Backrest Assembly
• 1 x Chrome Leg Base Assembly
• 4 x Screws (for attaching seat to base)
• 1 x Allen Wrench (for screws)
• 4 x Plastic Floor Protectors (pre-attached to legs)

4. Assembly Instructions

The LeisureMod Oyster Dining Side Chair is designed for easy assembly. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratching.
2. Align Seat and Base: Position the polycarbonate seat and backrest assembly over the chrome leg base. Ensure the pre-drilled holes on the underside of the seat align with the holes on the top of the leg base.
3. Secure with Screws: Insert the four provided screws into the aligned holes. Using the included Allen wrench, hand-tighten each screw partially. Do not fully tighten any screw until all four are in place.
4. Final Tightening: Once all four screws are partially inserted, gradually tighten each screw completely. Ensure they are snug but do not overtighten, as this may damage the polycarbonate material.
5. Check Stability: Gently place the assembled chair on a flat surface and apply light pressure to ensure it is stable and does not wobble. If wobbling occurs, recheck screw tightness.

Image 4.1: Illustration of easy assembly, stackable feature, UV protection, and floor protectors.

5. Usage and Care

5.1 Usage

• This chair is designed for indoor use, primarily as a dining or side chair.
• The chair is stackable for convenient storage. When stacking, lift carefully and align chairs to prevent scratching.
• The polycarbonate material is UV-protected from direct exposure to the sun, but prolonged exposure to harsh sunlight may still affect its appearance over time.

5.2 Care and Maintenance

• Cleaning: Wipe the polycarbonate seat and chrome legs with a soft, damp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Protection: The chair includes plastic caps on each leg to protect flooring. Periodically check these caps for wear and tear and replace if necessary.
• Inspection: Regularly inspect all screws and connections to ensure they remain tight. Retighten as needed to maintain stability and safety.

6. Troubleshooting

• Chair is Wobbly: Ensure all four screws attaching the seat to the base are fully and evenly tightened. If the issue persists, loosen all screws slightly, press down on the seat to level the chair, and then retighten the screws.
• Screws Do Not Align: During assembly, ensure the seat is correctly oriented and aligned with the leg base. Sometimes, gently wiggling the components can help align the holes. Do not force screws, as this can strip the threads or damage the material. If alignment issues persist, contact customer support.
• Scratches on Polycarbonate: Polycarbonate, while durable, can scratch. Avoid dragging sharp objects across the surface. For minor scratches, specialized plastic polish may be used, following the product's instructions.

7. Product Specifications

Image 7.1: Detailed dimensions of the LeisureMod Oyster Dining Side Chair.

8. Warranty and Support

For warranty information or technical support, please contact LeisureMod customer service. Details can typically be found on the LeisureMod official website or through your point of purchase. Please have your model number (VCOC17TBL) and proof of purchase available when contacting support.

For additional information or to explore other products, visit the official LeisureMod store: LeisureMod Store