1. Introduction
Thank you for choosing the WORKPRO 16-inch Wide Mouth Tool Bag. This manual provides essential information for the proper setup, operation, and maintenance of your new tool bag. Please read it thoroughly before use to ensure optimal performance and longevity.
Figure 1: Front view of the WORKPRO 16-inch Wide Mouth Tool Bag.
2. Key Features
The WORKPRO 16-inch Wide Mouth Tool Bag is designed for durability, organization, and ease of transport. Key features include:
- Premium Materials & Construction: Crafted from durable 600D polyester fabric with fine stitching for enhanced reliability and longevity.
- Multi-Pockets & Large Interior Space: Features 8 sturdy internal pockets, 13 exterior pockets, and 8 belts for versatile tool storage and organization. The wide interior allows for easy retrieval of tools.
- Wide Open Mouth & Double-Pull Zipper: Equipped with an internal metal frame and a top double-pull zipper for convenient access and organization of contents.
- Abrasion-Resistant & Water-Proof Molded Base: A hard, waterproof molded base protects tools from moisture and impacts, keeping them dry and secure.
- Comfortable Transport: Includes an extra padded handle and an adjustable shoulder strap for comfortable carrying of heavy loads.
Figure 2: Product dimensions and load-bearing capacity. The bag measures 16 inches (40 cm) in length, 8.66 inches (22 cm) in width, and 10.24 inches (26 cm) in height, with a load-bearing capacity of up to 15 kg (33 pounds).
Figure 3: Detailed view of the bag's construction, highlighting the double zippers for smooth operation, the steel wire-lined large opening design for structural integrity, and the fine stitching for enhanced durability.
3. Setup and Initial Use
Your WORKPRO tool bag comes ready for immediate use. Follow these steps for initial setup:
- Unpack: Remove the tool bag from its packaging.
- Inspect: Check for any visible damage or manufacturing defects. If any are found, contact customer support.
- Adjust Shoulder Strap: Attach the adjustable shoulder strap to the D-rings on either side of the bag. Adjust the length to your preferred carrying comfort.
- Organize: Utilize the various internal and external pockets to sort your tools. This will help maintain organization and quick access.
Figure 4: The tool bag offers two carrying options: a padded and adjustable shoulder strap for hands-free transport and an extra padded handle for comfortable hand carrying.
4. Operating Instructions
Using your WORKPRO tool bag is straightforward. Consider the following for efficient use:
- Loading Tools: Place heavier and larger tools at the bottom of the main compartment. Use the internal pockets for smaller items like screwdrivers, pliers, and measuring tapes.
- Utilizing External Pockets: The 13 exterior pockets and 8 belts are ideal for frequently accessed tools or items that need to be kept separate.
- Securing Contents: Always ensure the double-pull zipper is fully closed when transporting the bag to prevent items from falling out.
- Carrying: For lighter loads, use the padded handle. For heavier loads or extended transport, utilize the adjustable shoulder strap to distribute weight evenly.
Figure 5: An overhead view illustrating the extensive pocket system, including 13 outside pockets and 8 belts designed to organize a variety of tools such as wrenches, pliers, screwdrivers, and tape measures.
5. Care and Maintenance
Proper care will extend the life of your WORKPRO tool bag:
- Cleaning: Wipe down the exterior with a damp cloth and mild soap as needed. For the interior, shake out any debris.
- Drying: If the bag gets wet, especially the fabric parts, allow it to air dry completely before storing to prevent mold or mildew.
- Storage: Store the bag in a dry, cool place away from direct sunlight when not in use.
- Avoid Overloading: While durable, avoid exceeding the recommended weight capacity (33 pounds / 15 kg) to prevent strain on seams and zippers.
Figure 6: The rigid and waterproof plastic base of the tool bag, designed to protect contents from water and abrasion, ensuring tools remain dry and secure even on wet surfaces.
6. Troubleshooting
Most issues with your tool bag can be resolved with simple steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Zipper sticking | Dirt or debris in zipper teeth. | Clean zipper teeth with a small brush and apply a zipper lubricant (e.g., wax or silicone spray). |
| Bag losing shape | Overloading or improper storage. | Reduce load. Store bag upright and avoid placing heavy objects on top when empty. |
| Water seeping through fabric | Extreme conditions or wear on water-resistant coating. | The base is waterproof, but fabric is water-resistant. Avoid prolonged exposure to heavy rain. Consider applying a fabric waterproofing spray. |
7. Product Specifications
| Attribute | Detail |
|---|---|
| Brand | WORKPRO |
| Model Number | FBA_W136007A |
| Material | 600D Polyester, Metal, Rubber |
| Color | Black & Blue |
| Product Dimensions (L x W x H) | 15.75" x 8.66" x 10.24" (40cm x 22cm x 26cm) |
| Item Weight | 12.3 ounces |
| Maximum Weight Recommendation | 33 Pounds (15 Kilograms) |
| Water Resistance Level | Waterproof (Base), Water-Resistant (Fabric) |
| Number of Compartments | 22 (8 interior, 13 exterior pockets, 8 belts) |
| UPC | 820909725862 |
8. Warranty and Support
The WORKPRO 16-inch Wide Mouth Tool Bag comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact WORKPRO customer service through their official website or the retailer where the product was purchased. Please have your model number (FBA_W136007A) and proof of purchase ready.
