BLACK+DECKER BXPW1300E Pressure Washer User Manual

1. Introduction

Thank you for choosing the BLACK+DECKER BXPW1300E Pressure Washer. This compact and lightweight cold water pressure washer is designed for efficient removal of dirt from various outdoor surfaces around your home, including small outdoor areas, grilles, garden furniture, and bicycles. Its design prioritizes maneuverability and functionality, allowing for quick and effective cleaning with less effort than traditional methods.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your pressure washer. Please read it thoroughly before first use and keep it for future reference.

2. Important Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Read all instructions: Familiarize yourself with the controls and proper use of the pressure washer.
• Grounding instructions: This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock.
• Avoid accidental starting: Ensure the switch is in the OFF position before plugging in.
• Keep area clear: Do not allow children or untrained persons to operate this unit. Keep bystanders away from the work area.
• Wear appropriate safety gear: Always wear safety glasses, hearing protection, and protective clothing.
• Do not direct jet at persons or animals: The high-pressure jet can be dangerous if misused.
• Check for damage: Before each use, inspect the power cord, hose, and gun for any damage. Do not use if damaged.
• Use proper extension cords: If an extension cord is used, ensure it is suitable for outdoor use and rated for the appliance's power requirements.
• Disconnect power: Always disconnect the power supply before performing any maintenance or cleaning.

3. Product Components and Accessories

The BLACK+DECKER BXPW1300E comes equipped with several components and accessories to enhance your cleaning experience. Refer to the image below for a visual overview of the main unit and included accessories.

Figure 3.1: Overview of the BXPW1300E Pressure Washer and its accessories.

This image displays the main pressure washer unit, the spray gun, the lance extension, the high-pressure hose, and various nozzles including the rotary nozzle and the adjustable jet nozzle. The foam kit is also visible.

Included Accessories:

• Spray Gun: For controlling the water flow and pressure.
• Lance Extension: Extends the reach of the spray gun for various cleaning tasks.
• High-Pressure Hose (3 meters): Connects the pressure washer to the spray gun.
• Rotary Nozzle: Produces a powerful, rotating jet for removing stubborn dirt and grime.
• Adjustable Jet Nozzle:
  • Cylindrical Jet: Rotate the nozzle for a powerful, concentrated stream, suitable for targeted cleaning of stubborn spots.
  • Fan Spray: Rotate the nozzle for a wider, gentler spray, ideal for rinsing, cleaning delicate surfaces, or covering larger areas.

Figure 3.2: Integrated accessory storage on the rear of the unit.

This image highlights the convenient storage hooks and compartments on the back of the pressure washer, designed to neatly store the spray gun, lance, hose, and foam kit when not in use.

4. Setup and Assembly

Before operating your pressure washer, ensure it is properly assembled and connected to water and power sources.

4.1 Connecting to Water Supply:

1. Connect Garden Hose: Attach a standard garden hose (not supplied) to the water inlet connection on the pressure washer. Ensure the connection is secure to prevent leaks.
2. Check Water Inlet Filter: The pressure washer features a controllable water inlet filter that retains impurities. Ensure this filter is clean before connecting the water supply to guarantee optimal performance.
3. Turn on Water: Fully open the water tap to ensure a steady supply of water to the unit.

4.2 Self-Priming Function (Optional):

If connection to the main water supply is not possible, the pressure washer can draw water from an external reservoir (e.g., a bucket or tank) using its self-priming function.

Figure 4.1: Self-priming setup for drawing water from an external source.

This diagram shows how the pressure washer can be connected to an external water reservoir, such as a bucket, to draw water when a direct tap connection is unavailable. Ensure the hose is fully submerged in the water source.

1. Submerge Hose: Place the end of the garden hose into the external water reservoir, ensuring it is fully submerged.
2. Connect to Unit: Connect the other end of the hose to the water inlet of the pressure washer.
3. Prime the Pump: Before turning on the unit, hold the spray gun trigger open to allow air to escape and water to fill the pump. This may take a few moments.

4.3 Connecting Power:

1. Plug In: Insert the power cord into a suitable grounded electrical outlet. Ensure the power switch on the unit is in the OFF position before plugging in.

5. Operating Instructions

Follow these steps for safe and effective operation of your BLACK+DECKER BXPW1300E Pressure Washer.

5.1 Starting the Pressure Washer:

1. Ensure Water Supply: Confirm that the water supply is connected and turned on.
2. Turn On Power: Flip the main power switch on the unit to the "ON" position.
3. Release Air: Before starting, squeeze the trigger on the spray gun to release any trapped air in the system. Hold the trigger until a steady stream of water emerges.
4. Begin Cleaning: Once water flows steadily, the unit is ready for use.

5.2 Using the Nozzles:

• Rotary Nozzle: For tough dirt and grime on hard surfaces like concrete or stone. Provides a concentrated, powerful cleaning action.
• Adjustable Jet Nozzle:
  • Cylindrical Jet: Rotate the nozzle for a powerful, concentrated stream, suitable for targeted cleaning of stubborn spots.
  • Fan Spray: Rotate the nozzle for a wider, gentler spray, ideal for rinsing, cleaning delicate surfaces, or covering larger areas.

5.3 Applying Detergent with Foam Kit:

1. Fill Foam Kit: Fill the 0.5-liter foam kit with appropriate pressure washer detergent.
2. Attach to Gun: Securely attach the foam kit to the spray gun.
3. Apply Detergent: Squeeze the trigger to dispense the detergent foam onto the surface to be cleaned. Allow the detergent to soak for a few minutes (refer to detergent instructions) before rinsing.

Figure 5.1: Pressure washer in operation.

This image shows the BLACK+DECKER BXPW1300E pressure washer actively cleaning a paved surface, demonstrating its effectiveness in removing dirt and grime.

5.4 Shutting Down:

1. Turn Off Power: Switch the main power switch on the unit to the "OFF" position.
2. Turn Off Water: Close the water tap.
3. Release Pressure: Squeeze the trigger on the spray gun to release any remaining pressure in the system.
4. Disconnect: Disconnect the garden hose and unplug the power cord.

6. Maintenance and Storage

Regular maintenance ensures the longevity and optimal performance of your pressure washer.

6.1 Cleaning the Water Inlet Filter:

Periodically inspect and clean the water inlet filter to prevent impurities from entering the pump. Remove the filter, rinse it under running water, and reinsert it.

6.2 Draining and Winterizing:

If storing the pressure washer in an area where temperatures may drop below freezing, it is crucial to drain all water from the pump and hoses to prevent damage.

1. Disconnect Water: Disconnect the garden hose and high-pressure hose.
2. Run Briefly: Turn on the pressure washer for a few seconds (without water supply) to expel any remaining water from the pump. Do not run for more than 5 seconds without water.
3. Store Accessories: Store all accessories on the integrated hooks on the back of the unit.

6.3 Storage:

Store the pressure washer in a dry, frost-free location. Its compact size allows for minimal space occupation.

7. Troubleshooting Guide

This section addresses common issues you might encounter with your pressure washer. For problems not listed here, please contact customer support.

8. Technical Specifications

Key technical data for the BLACK+DECKER BXPW1300E Pressure Washer.

9. Warranty Information

BLACK+DECKER products are manufactured to high quality standards and are guaranteed for a period of 24 months from the date of purchase against manufacturing defects. This warranty does not cover damage caused by misuse, abuse, normal wear and tear, or unauthorized repairs. Please retain your proof of purchase for warranty claims.

10. Customer Support

For technical assistance, spare parts, or warranty inquiries, please contact BLACK+DECKER customer service. Refer to the official BLACK+DECKER website or your local dealer for contact details specific to your region.

Website: www.blackanddecker.com