1. Introduction
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your deleyCON Universal TV Wall Mount, model MK-W-4. Please read all instructions carefully before beginning installation to ensure correct setup and to prevent damage or injury. Keep this manual for future reference.
Image 1.1: Overview of the deleyCON Universal TV Wall Mount MK-W-4, showcasing its robust design and articulating arms.
2. Safety Information
WARNING: Improper installation or use of this product can result in serious injury or property damage. If you do not understand these instructions or have doubts about the safety of the installation, consult a qualified professional.
- Weight Capacity: Do not exceed the maximum weight capacity of 60 kg (132 lbs). This mount is designed for TVs between 37 and 70 inches (94-178 cm).
- Wall Type: Ensure the mounting surface can safely support the combined weight of the mount and your TV. This mount is intended for installation on solid concrete walls, brick walls, or wood stud walls. Do not install on drywall alone.
- Tools: Use appropriate tools for installation. Always wear safety glasses.
- Children: Keep children away during installation. Small parts may be a choking hazard.
- Tightening Screws: Do not overtighten screws. Overtightening can damage the product or the mounting surface.
3. Package Contents
Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact deleyCON customer service.
- Wall Mount Assembly
- TV Mounting Brackets (2 pieces)
- Mounting Hardware Kit (various screws, washers, spacers, wall anchors)
- Bubble Level (small and large)
- Installation Template
- Wrench
- Cable Ties
- Instruction Manual
Image 3.1: All components included in the deleyCON TV Wall Mount package, including the main mount, TV brackets, and a comprehensive hardware kit with various screws, spacers, and tools.
4. Setup and Installation
4.1 Pre-Installation Checklist
- Tools Required: Pencil, drill, stud finder (for wood studs), tape measure, Phillips head screwdriver, socket wrench.
- Wall Type: Identify your wall type (solid concrete, brick, or wood stud). Do not install on drywall without securing to studs.
- VESA Compatibility: Check the VESA mounting pattern on the back of your TV. This mount supports VESA patterns from 200x100mm up to 600x400mm.
Image 4.1: Diagram illustrating VESA mounting hole patterns and the supported TV sizes (37-70 inches) and maximum weight (60 kg).
4.2 Step-by-Step Installation
- Attach TV Brackets to TV: Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA holes. Secure the two vertical TV mounting brackets to the back of your TV. Ensure they are centered and securely fastened.
- Mark Drill Holes: Position the wall mount assembly on the wall at your desired height. Use the included installation template and a pencil to mark the drill hole locations. Use the bubble level to ensure the mount is perfectly horizontal.
- Drill Holes: Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the chosen wall anchors. For wood studs, drill smaller pilot holes. For concrete/brick, use the appropriate masonry drill bit and wall anchors.
- Mount Wall Plate: Align the wall plate with the drilled holes. Insert the wall anchors (if applicable) and secure the wall plate to the wall using the provided lag bolts and washers. Tighten all bolts firmly but do not overtighten.
- Hang TV: Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV brackets are properly seated on the wall plate.
- Secure TV: Locate the safety screws on the bottom of the TV brackets. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement.
Image 4.2: Visual guide demonstrating the three main steps of installation: attaching brackets to the TV, mounting the wall plate, and hanging the TV onto the wall plate.
Image 4.3: A detailed rear view of the deleyCON TV wall mount, showing the robust construction of the wall plate and articulating arms.
5. Operating Instructions
The deleyCON MK-W-4 wall mount offers full motion capabilities for optimal viewing angles.
- Tilt Adjustment: The TV can be tilted vertically from -15° (downward) to +5° (upward). Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then retighten the knobs to secure.
- Swivel Adjustment: The mount allows for horizontal swivel up to 90° to the left and 90° to the right, totaling 180° of rotation. Gently push or pull the TV to the desired angle.
- Extension Adjustment: The mount can extend the TV from the wall, with a variable distance between 69mm and 615mm. Pull the TV gently away from the wall or push it back to adjust the extension.
Image 5.1: Diagram illustrating the full range of motion for the deleyCON TV wall mount, including 180° swivel, -15° to +5° tilt, and an extension range of 69mm to 615mm from the wall.
Image 5.2: An example of the deleyCON TV wall mount in a living room setting, demonstrating the tilt functionality for optimal viewing.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your TV wall mount.
- Periodic Checks: Every few months, check all screws and bolts to ensure they remain tight. Retighten if necessary.
- Cleaning: Clean the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Lubrication: The articulating joints are designed for smooth movement. If movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points.
7. Troubleshooting
If you encounter issues with your deleyCON TV wall mount, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level | Wall plate not level during installation; TV brackets not level on TV. | Re-check wall plate level and adjust if possible. Ensure TV brackets are evenly mounted on the TV. Some mounts allow for minor post-installation leveling adjustments. |
| Mount feels loose or unstable | Mounting bolts are not sufficiently tightened; incorrect wall anchors used; wall material is insufficient. | Ensure all wall mounting bolts are securely tightened. Verify that appropriate wall anchors were used for your wall type. If the wall material is weak, consider reinforcing the wall or consulting a professional. |
| Difficulty adjusting tilt/swivel/extension | Adjustment knobs/screws are too tight; joints require lubrication; TV weight is near maximum capacity. | Loosen adjustment knobs/screws slightly before attempting to move. Apply a small amount of silicone lubricant to the joints. Ensure TV weight does not exceed 60 kg. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | MK-W-4 |
| Brand | deleyCON |
| Screen Size Compatibility | 37 - 70 inches (94 - 178 cm) |
| Maximum Weight Capacity | 60 kg (132 lbs) |
| VESA Compatibility | 200x100, 200x200, 300x100, 300x200, 300x300, 400x100, 400x200, 400x300, 400x400, 500x300, 500x400, 600x200, 600x300, 600x400 |
| Tilt Angle | -15° to +5° |
| Swivel Angle | -90° to +90° (180° total) |
| Wall Distance (Extension) | 69 mm - 615 mm |
| Material | Metal |
| Product Dimensions (Mount) | 30 x 8 x 73 cm |
| Item Weight | 7.4 kg |
9. Warranty and Support
deleyCON products are manufactured with high-quality materials and undergo strict quality control. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official deleyCON website.
For technical support, missing parts, or any questions regarding your deleyCON TV Wall Mount, please contact deleyCON customer service through their official channels. Always provide your product model (MK-W-4) and purchase details when seeking support.
