Introduction
Thank you for choosing the MVMT Velocity X-3 Portable Wireless Bluetooth LED Speaker. This speaker is designed to provide high-quality stereo sound with enhanced bass, featuring a dynamic LED light show to complement your audio experience. Its portable design and rechargeable battery ensure music on the go, while the built-in microphone allows for convenient hands-free calls. This manual provides essential information for setting up, operating, and maintaining your speaker.
Important Safety Information
- Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the speaker to strong impacts.
- Do not disassemble, repair, or modify the speaker yourself. Refer all servicing to qualified personnel.
- Keep the speaker away from water and liquids. The product is not waterproof.
- Use only the specified charging cable and adapter to prevent damage or fire.
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Package Contents
Please check that the following items are included in your package:
- MVMT Velocity X-3 Portable Wireless Bluetooth LED Speaker
- USB Charging Cable
- User Manual
Product Overview
Familiarize yourself with the speaker's components and controls.
Image 1: Side view of the MVMT Velocity X-3 speaker, showcasing its rectangular design and the vibrant multi-color LED light display.
Image 2: Front view of the MVMT Velocity X-3 speaker, highlighting the full LED light grid displaying a rainbow spectrum of colors.
Controls and Ports (General)
- Power Button: To turn the speaker on/off.
- Volume Controls: To adjust the playback volume.
- Play/Pause Button: To control music playback.
- Mode Button: To switch between different modes (e.g., Bluetooth, AUX).
- LED Light Button: To control the LED light show (on/off or change patterns).
- Microphone: For hands-free calling.
- Charging Port: For connecting the USB charging cable.
Setup
1. Charging the Speaker
- Connect the small end of the USB charging cable to the charging port on the speaker.
- Connect the larger end of the USB charging cable to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate, typically red, during charging.
- Once fully charged, the indicator light will change color or turn off. A full charge usually takes 2-3 hours.
2. Powering On/Off
- To Power On: Press and hold the Power button for approximately 3 seconds until you hear an audible prompt or see the LED lights activate.
- To Power Off: Press and hold the Power button again for approximately 3 seconds until you hear an audible prompt or the LED lights turn off.
Operating Instructions
1. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode. The LED indicator will typically flash blue rapidly.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "MVMT Velocity X-3" from the list of found devices.
- Once paired, you will hear a confirmation sound, and the LED indicator will typically glow solid blue.
- The speaker will automatically attempt to reconnect to the last paired device when powered on.
2. Playing Music
- After successful Bluetooth pairing, open your music application on your device and begin playback.
- Use the speaker's Volume Up/Down buttons or your device's volume controls to adjust the audio level.
- Press the Play/Pause button on the speaker to pause or resume music.
3. LED Light Show Control
The MVMT Velocity X-3 features a dynamic LED light show. Press the dedicated LED Light button (if available) to cycle through different light patterns or to turn the lights on/off.
4. Hands-Free Calling
- When a call comes in while connected via Bluetooth, the music will pause.
- Press the Play/Pause button (or a dedicated call button if present) once to answer the call.
- Speak into the speaker's built-in microphone.
- Press the Play/Pause button (or call button) again to end the call.
- To reject an incoming call, press and hold the Play/Pause button (or call button) for a few seconds.
Maintenance
- Cleaning: Wipe the speaker's exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners or aerosols.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is depleted. | Charge the speaker fully using the provided USB cable. |
| Cannot pair via Bluetooth. | Speaker is not in pairing mode; Bluetooth is off on device; device is too far. | Ensure speaker is in pairing mode (flashing LED). Turn on Bluetooth on your device. Move device closer to speaker (within 10 meters). Forget previous pairings on your device and try again. |
| No sound or low volume. | Volume too low on speaker or device; speaker not connected. | Increase volume on both the speaker and your connected device. Ensure the speaker is successfully paired. |
| Sound distortion. | Volume too high; device too far; interference. | Reduce volume. Move device closer to speaker. Avoid obstacles between speaker and device. |
Specifications
| Model Name | Velocity X-3 |
| Item Model Number | SP3056-BKA |
| Brand | MVMT |
| Connectivity Technology | Wireless (Bluetooth), Wired |
| Audio Output Mode | Stereo |
| Subwoofer Diameter | 1.6 Inches |
| Special Features | Portable, Built-in Microphone, LED Light Show |
| Product Dimensions | 13.46 x 4.32 x 5.59 cm |
| Item Weight | 340.19 g |
| Material | Crystal (as per product data, likely referring to a design element or finish) |
| Mounting Type | Car Mount, Freestanding |
| Is Waterproof | No |
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for warranty claims.
