Faber Cleo 700 SS LTW 60 Kitchen Chimney User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Faber Cleo 700 SS LTW 60 Kitchen Chimney. Please read this manual thoroughly before using the appliance and retain it for future reference.

The Faber Cleo 700 SS LTW 60 is designed to effectively remove smoke, grease, and odors from your kitchen, contributing to a cleaner cooking environment. Its stainless steel construction and baffle filters ensure durability and performance.

2. Important Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.

• Ensure the power supply voltage matches the rating indicated on the appliance.
• Do not operate the chimney with a damaged cord or plug.
• Installation and repairs should only be performed by qualified personnel.
• Maintain adequate ventilation in the room when the chimney is in use, especially if other fuel-burning appliances are present.
• Clean grease filters regularly to prevent fire hazards.
• Do not flambé under the range hood.
• Keep children away from the appliance during operation.

3. Package Contents

Verify that all components are present and undamaged upon unpacking:

• Faber Cleo 700 SS LTW 60 Kitchen Chimney Unit
• Baffle Filters (pre-installed or separate)
• Light Kit (including CFL bulbs)
• Mounting Hardware (screws, wall plugs, etc.)
• User Manual

4. Setup and Installation

The Faber Cleo 700 SS LTW 60 is a wall-mounted canopy hood. Proper installation is crucial for optimal performance and safety. It is highly recommended that installation be performed by a qualified technician.

4.1 Pre-Installation Checks

• Ensure the wall structure can support the weight of the chimney.
• Verify that the electrical outlet is properly grounded and accessible.
• Determine the appropriate ducting route for exhaust (if ducted model).

4.2 Mounting the Chimney

Follow the detailed instructions provided in the separate installation guide (if applicable) or consult a professional. Generally, this involves:

1. Marking drilling points on the wall according to the chimney's dimensions and recommended height above the cooking surface.
2. Drilling holes and inserting wall plugs.
3. Securing the mounting bracket to the wall.
4. Lifting and attaching the chimney unit to the mounting bracket.
5. Connecting the exhaust ducting (if applicable).
6. Connecting the power supply.

Figure 1: Front view of the Faber Cleo 700 SS LTW 60 Kitchen Chimney. This image shows the overall design and control panel area.

5. Operating Instructions

The Faber Cleo 700 SS LTW 60 features electro-mechanical push-button controls for easy operation.

5.1 Control Panel

The control panel typically consists of several push buttons:

• Power Button: To turn the chimney ON/OFF.
• Speed Selection Buttons: To adjust the suction power (e.g., Low, Medium, High). The chimney offers a suction capacity of 700 m³/hr.
• Light Button: To turn the CFL lamps (2 x 5W) ON/OFF, illuminating your cooking area.

5.2 Using the Chimney

1. Before cooking, turn on the chimney using the Power button.
2. Select the desired suction speed based on the intensity of cooking fumes. For heavy frying or grilling, use a higher speed.
3. Turn on the lights for better visibility over your cooking range.
4. Allow the chimney to run for a few minutes after cooking to ensure all fumes are cleared.
5. Turn off the chimney and lights when no longer needed.

6. Maintenance and Cleaning

Regular maintenance ensures the longevity and efficient performance of your chimney. Always disconnect the power supply before cleaning or performing any maintenance.

6.1 Cleaning Baffle Filters

The chimney is equipped with baffle filters, designed to separate grease particles from the air. These filters require regular cleaning.

• Frequency: Clean filters every 2-4 weeks, depending on cooking frequency and type.
• Procedure:
  1. Carefully remove the baffle filters by releasing their latches.
  2. Wash the filters in hot soapy water or a degreasing solution. For stubborn grease, soak them for some time. They can also be cleaned in a dishwasher.
  3. Rinse thoroughly and allow them to dry completely before re-installing.

6.2 Cleaning the Chimney Exterior

The stainless steel exterior and glass components can be cleaned with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that can scratch the surface.

6.3 Replacing CFL Lamps

If a CFL lamp burns out, replace it with a new one of the same type and wattage (2 x 5W CFL). Refer to the installation guide for specific instructions on accessing and replacing the lamps.

7. Troubleshooting

Before contacting customer service, refer to the following common issues and their solutions:

If the problem persists after attempting these solutions, please contact Faber customer support.

8. Specifications

Key technical specifications for the Faber Cleo 700 SS LTW 60 Kitchen Chimney:

9. Warranty Information

Faber provides a lifetime warranty for this product. Please refer to the warranty card included with your purchase for specific terms, conditions, and registration details. Retain your purchase receipt as proof of purchase for warranty claims.

10. Customer Support

For technical assistance, service requests, or spare parts, please contact Faber customer support. Contact details can typically be found on the Faber official website or on the warranty card.

Please have your model number (Cleo 700 SS LTW 60) and purchase date ready when contacting support.